User manual

Problem Possible cause Solution
The shaver does
not shave as well
as it used to.
The shaving heads
are damaged or
worn.
Replace the shaving heads
(see chapter ‘Replacement’).
Hairs or dirt
obstruct the shaving
heads.
Clean the shaving heads by
following the steps of the
thorough cleaning method
(see chapter ‘Cleaning and
maintenance’).
The shaver does
not work when
I press the
on/off button.
The shaver is still
attached to the
mains. For safety
reasons, the shaver
can only be used
without cord.
Disconnect the shaver from
the mains and press the on/
off button to switch on the
shaver (see section ‘Unplug
for use reminder’).
The rechargeable
battery is empty.
Recharge the battery (see
chapter ‘Charging’).
The travel lock
is activated.
Press the on/off button for
3 seconds to deactivate the
travel lock.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
Clean the shaving heads or
replace them (see chapters
‘Cleaning and maintenance’
and ‘Replacement’).
ENGLISH 35