User manual
BC
Tripleheader shaver
S1016
Tri
pl
e
h
ea
d
er s
h
aver
>75 % recycled paper
>75 % papier recyclé
Manufactured for:
Philips Personal Health
a division of Philips North America LLC
P.O. Box 10313, Stamford, CT 06904
This symbol on the product’s
nameplate means it is listed by
Underwriters’ Laboratories, Inc.
Norelco and Tripleheader are registered
trademarks of Philips North America LLC.
PHILIPS and Philips shield are registered
trademarks of Koninklijke Philips N.V.
©2023 Philips North America LLC. All rights
reserved.
3000.105.8961.1 (01/03/2023)
English
IMPORTANT
SAFETY
INSTRUCTIONS
When using an electric product, basic
precautions should always be followed,
including the following:
Read all instructions before using this
product.
DANGER
To reduce the risk of electric shock:
- Do not reach for a corded product that
has fallen into water. Unplug immediately
from the power outlet.
- Keep the power cord dry.
- Use product only in dry condition. Do not
use while bathing or in a shower.
- Do not place or store the product where it
can fall or be pulled into a tub or sink. Do
not place or drop the product into water
or other liquid.
- Remove power cord from power outlet
and product before cleaning.
- Always unplug this product from the
power outlet immediately after use.
WARNING
To reduce the risk of burns, re, electric
shock, or injury to persons:
- This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the product
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the product.
- Only use original Philips accessories or
consumables. Only use detachable power
cord HQ8505.
- Use this product only for its intended
household use as described in this manual.
Do not use attachments not recommended
by Philips North America LLC.
- Never operate this product if it has a
damaged power cord, if it is not working
properly, after it has been dropped or
damaged, or after the product or power
cord has been dropped into water. For
assistance call 1-800-243-3050.
- Keep the power cord away from heated
surfaces.
- Never drop or insert any object into any
opening.
- Do not use the power cord in or near a
power outlet that contains an electric air
freshener to prevent damage to the power
cord.
- Do not use product outdoors or operate
where aerosol (spray) products are
being used or where oxygen is being
administered.
- Always check shaving heads (guards and
cutters) before using the product. Do not
use the product if cutters or guards are
damaged, as injury may occur.
- Always attach power cord to product rst,
then to power outlet. To disconnect, turn
your shaver o before removing the power
cord from the power outlet.
- Plug power cord directly into power outlet.
Do not use an extension cord.
- Unplug power cord before plugging in or
unplugging the product.
- Only use the power cord and other
accessories supplied with the product.
IMPORTANT: The power plug contains a
transformer. Do not cut o the power plug to
replace it with another plug as this will cause
a hazardous condition.
SAVE THESE
INSTRUCTIONS
Introduction
Congratulations on your purchase and
welcome to Philips Norelco!
To fully benet from the support that Philips
Norelco oers, register your product at
www.philips.com/register.
General description (Fig. 1)
1 Protective cap
2 Shaving unit
3 Shaving unit release button
4 On/o button
5 Socket for small plug
6 Power cord
7 Small plug
Using the product
This symbol (Fig. 2) indicates that the product
can be rinsed under running tap water.
- Use this product for its intended household
use as described in this manual.
- For hygienic reasons, the product should
only be used by one person.
Note: This product can only be used with cord.
Switching the product on and o
1 Connect power cord to shaver (Fig. 3).
2 Press the on/o button once to switch the
shaver on or o (Fig. 4).
Shaving
For the best results on skin comfort, pre-trim
your beard if you have not shaved for 3 days
or longer.
1 Switch on the shaver.
2 Move the shaver in circular movements
over your skin to catch hair growing in all
directions (Fig. 5).
3 Stretch your skin with your free hand so
blades can lift and cut hair. Gently press
shaver to skin so the oating heads can
follow the contours of your face.
Note: Do not press too hard as too much
pressure can cause shaving heads to pinch
the skin.
4 After shaving, switch o the product.
5 Clean the shaver (see ‘Cleaning and
maintenance’).
6 Put the protective cap on the product to
protect shaver heads during storage and
travel (Fig. 10).
21-Day adaptation process
- 21 Day Trial and Conversion Process. It is a
fact that your skin and beard need time to
adjust to a new grooming system.
- Use your new shaver exclusively for 3 weeks
to fully enjoy the closeness of a Philips
Norelco shave.
- At rst you may not get as close a shave as
you expect, or your face may even become
slightly irritated. This is normal since your
beard and skin will need time to adjust.
Invest 3 weeks and you’ll soon experience
the full joy of your new shaver.
- Stick with it! If you alternate shaving
methods during the adjustment period, it
may make it more dicult to adapt to the
Philips Norelco shaving system.
- If you are still not convinced after 21 days,
Philips Norelco will refund you the full
purchase price as long as the request is
received within 45 days of purchase.
Cleaning and maintenance
Regular cleaning guarantees better
shaving results.
Never clean, remove or replace the
shaving unit while the shaver is
switched on.
Do not touch shaving heads with hard
objects as this may dent or damage the
precision-made slotted shaving head.
Do not use abrasives, scourers or
aggressive liquids such as gasoline or
acetone to clean the shaver.
Cleaning the shaver
Clean the shaver after every shave for optimal
shaving performance.
Always check if the water is too hot, to
prevent burning your hands.
2
1
2
1
3
4
7
5
6
1
2
2
1
1
2
2
5
8
11
14
17
1
3
6
9
12
15
18
4
7
10
13
16
While rinsing shaving heads, water may
drip out of the base of shaver. This is a
normal occurrence. Internal electric parts
are in a waterproof compartment so the
shaver will be protected against water
damage.
1 Switch o the shaver, unplug from outlet
and remove power cord from the product
(Fig. 6).
2 Press the shaving unit release button to
open the shaving unit (Fig. 7). Rinse the hair
chamber under the tap.
3 Rinse the outside of the shaving unit with
lukewarm water (Fig. 8).
Never dry the shaving unit with a
towel or tissue, as this may damage the
shaving heads (Fig. 9).
4 Carefully shake o excess water and let the
shaver air dry.
5 Close the shaving unit.
Replacement
Replacing the shaving heads
For maximum shaving performance, replace
the shaving heads once a year (Fig. 11).
Replace damaged shaving heads immediately.
Always replace the shaving heads with
original Philips Norelco shaving heads (see
‘Accessories’).
1 Switch o the shaver.
2 Press the shaving unit release button to
open the shaving unit. Pull the shaving unit
o the shaver (Fig. 12).
3 Turn the lock counterclockwise (1) and
remove the retaining frame (2). Place it
aside in a safe place (Fig. 13).
4 Remove the shaving heads from the
shaving unit. Discard the used shaving
heads immediately to avoid mixing them
with the new shaving heads (Fig. 14).
5 Place new shaving heads in the shaving unit
(Fig. 15).
Note: Make sure that the shaving heads
with the projections t exactly onto the
hooks of the shaving head holder when
placing them (Fig. 16). The shaving heads
supplied with the shaver either have
notches or projections. Both shaving
systems are the same.
6 Put the retaining frame back into the
shaving unit (1) and turn the lock clockwise
(2) (Fig. 17).
7 Insert the hinge of the shaving unit into the
slot in the top of the shaver. Then close the
shaving unit (Fig. 18).
Note:If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
Put the protective cap on the shaver to
prevent damage (Fig. 10).
Note: Always let the shaver dry completely
before storing.
- Be sure the product is switched o. Remove
the power cord from power outlet and
the product before storing it in a safe,
dry location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord and other accessories in a safe
location where these will not be cut or
damaged.
- Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Accessories
Replacement parts and accessories may
be purchased at a store near you or on our
website www.philips.com/store.
The following accessory is available:
- SH30 Philips Norelco replacement blades.
Assistance
For assistance, visit our website:
or call toll free 1-800-243-3050.
Disposal
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. For
recycling information, please contact your
local waste management facilities or visit
www.recycle.philips.com.
Full Two-Year Warranty
Philips North America LLC warrants this
new product against defects in materials or
workmanship for a period of two years from
the date of purchase, and agrees to repair or
replace any defective product without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, the axing of
any attachment not provided with the product
or loss of parts or subjecting the product to
any but the specied voltage.*
The shaving heads (cutters and guards) are not
covered by the terms of this warranty because
they are subject to wear and tear.
NO RESPONSIBILITY IS ASSUMED FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
In order to obtain warranty service, simply go
to www.philips.com/support. It is suggested
that for your protection you return shipments
of product by insured mail, insurance prepaid.
Damage occurring during shipment is not
covered by this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
This warranty gives you specic legal rights,
and you may also have other rights which
vary from state to state. Some states do not
allow the exclusion or limitation of incidental
or consequential damages, so the above
exclusion and limitations may not apply to
you.
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
If you are not fully satised with your product
send the product back and we’ll refund you
the full purchase price.
The product must be shipped prepaid by
insured mail, insurance prepaid, have the
original sales receipt, indicating purchase
price and date of purchase, and the money-
back guarantee return authorization form
enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later
than 45 days after the date of purchase. Philips
reserves the right to verify the purchase price
of the product and limit refunds not to exceed
suggested retail price.
To obtain the money-back guarantee
service, please go to www.
PhilipsMoneyBack.com and follow the
simple 3-step process.
Delivery of refund check will occur
6–8weeks after receipt of returned
product.