cover 1001.
cover 1001.
1001.7 en 16x24 27-06-2003 08:34 Pagina 1 Unpacking and wall mounting instructions Daisy chaining For the unpacking instructions follow the illustrated steps printed on the packaging (outside and inside). For the wall mounting instructions follow the illustrated steps ‘ to § printed on the separate leaflet. Note: Stands are optional accessories. Consult your dealer. Connect your electronic receiver box See the separate supplied instruction manual with your receiver box.
1001.7 en 16x24 27-06-2003 08:34 Pagina 2 Monitor Display modes VGA Wide VGA Wide VGA MAC MAC MAC MAC SVGA XGA SXGA 640x480 848x480 852x480 640x480 832x624 1024x768 1152x870 800x600 1024x768 1280x1024 60, 72, 75, 85 Hz 60 Hz 60 Hz 66.67 Hz 74.55 Hz 74.93 Hz 75 Hz 56, 60, 72, 75, 85 Hz 60, 70, 75, 85 Hz 60, 72 Hz When a VGA computer is connected, the display selection is made automatically. A message is displayed when the monitor does not support the connected VGA mode.
1001.
1001.7 en 16x24 27-06-2003 08:34 Pagina 4 Use of the menus and the menu system Picture 1 Picture 2 Sound Setup Brightness Contrast Colour temp. Sharpness & Press the MENU key on the remote control to summon the different menu headers. Contrast This control allows you to adjust the contrast level of the picture. Colour temperature This control allows you to select the colour temperature of the picture. Move the cursor up/down to make a selection.
1001.7 en 16x24 27-06-2003 08:34 Pagina 5 Zoom factor Select Zoom factor and press the cursor left/right to adjust the zoom factor and to change the magnification of the picture. If zoom is not active, Zoom Off, changing the magnification factor will have no effect on the displayed picture. Sound menu Shift This control allows you, when necessary, to move the picture in a horizontal or vertical way. Volume This control allows you to adjust the volume level. & Use the cursor left/right to adjust.
1001.7 en 16x24 27-06-2003 08:34 Pagina 6 Tips Ambient temperature Do not hang up the monitor above a central heating or other heating sources. Care of the screen Clean the anti-reflex coated flat glass screen with a slightly damp soft cloth. Do not use abrasives solvents as it can damage the glass surface of the screen.
cover 1001.
cover 1001.7 27-06-2003 Printed in Belgium 08:48 Pagina 4 3122 126 1001.
