User manual

Problem Possible cause Solution
The shaving unit is soiled or
damaged to such an extent
that the motor cannot run.
In this case, the shaving unit
symbol, the tap symbol and
the exclamation mark ash.
Clean the shaving
unit or replace it (see
chapters ‘Cleaning
and maintenance’
and ‘Replacement’).
The temperature of the
shaver is too high. In this
case, the shaver does not
work and the exclamation
mark on the display ashes.
Switch off the shaver
and let it cool down.
As soon as the
temperature of the
shaver has dropped
sufciently, you can
switch on the shaver
again.
Specic types
only: The shaver
is not entirely
clean after
I clean it in
the Jet Clean
System.
The cleaning uid in the
cleaning chamber is soiled.
Empty and rinse the
cleaning chamber
and rell it with new
cleaning uid.
The cleaning uid level is
too low. If the uid volume
in the cleaning chamber
drops below the minimum
level during the cleaning
program, the program
aborts.The cleaning light and
the ‘cleaning chamber empty’
symbol ash at intervals and
the holder returns to its
starting position.
Rell the cleaning
chamber with
cleaning uid to
a level between
the two lines (see
chapter ‘Cleaning and
maintenance’).
ENGLISH 31