User manual

Travel lock (RQ1280/RQ1260/RQ1250 only)

You can lock the shaver when you are going to

travel. The travel lock prevents the shaver from being

switched on by accident.

Note: The displays of the various shaver types look

different, but show the same symbol.

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

, RQ1280: The display starts to count down

from 3. At 1, the appliance beeps to indicate that

it is locked.

, The lock symbol lights up on the display. After a

few seconds it goes out.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

, The motor starts running to indicate that the

travel lock has been deactivated.

The shaver is now ready for use again.

Note: When you place the shaver in the plugged-

in charger or Jet Clean System, the travel lock is

automatically deactivated.

Blocked shaving heads

Note: The displays of the various shaver types look

different, but show the same symbol.

- If the shaving heads are blocked, the shaving unit

symbol, the tap symbol and the exclamation mark

ash. In this case, the motor cannot run because

the shaving heads are soiled or damaged.

- When this happens, you have to clean the shaving

unit or replace it.

MINUTES LEFT

ENGLISH 13