User manual

Problem Possible cause Solution
The temperature of the
shaver is too high. In this
case, the shaver does
not work.
Let the shaver cool
down. As soon as the
temperature of the
shaver has dropped
sufciently, you can
switch on the shaver
again.
Specic types
only: The shaver
is not entirely
clean after I clean
it in the Jet Clean
System.
The cleaning uid in
the cleaning chamber is
soiled.
Empty and rinse the
cleaning chamber and
rell it with new cleaning
uid.
The cleaning uid level
is too low. If the uid
volume in the cleaning
chamber drops below
the minimum level
during the cleaning
program, the program
aborts.The cleaning
light and the ‘cleaning
chamber empty’ symbol
ash at intervals and
the holder returns to its
starting position.
Rell the cleaning
chamber with cleaning
uid to a level between
the two lines (see
chapter ‘Cleaning and
maintenance’).
You have used another
cleaning uid than the
original Philips cleaning
uid.
Only use HQ200
Philips Cleaning Fluid.
ENGLISH 29