User manual

When the uid level drops below the minimum level, the cleaning
light and the ‘cleaning chamber empty’ symbol start to ash and the
holder returns to its starting position (Fig. 37).
If you use the washing machine to clean your shaver every day, you
need to rell the cleaning chamber approx. every 15 days.

1 Simultaneously press the release buttons on both sides of the Jet
Clean System (1). Then lift the Jet Clean System off the cleaning
chamber (2). (Fig. 30)
The cleaning chamber remains behind.
2 Pouranyremainingcleaninguidoutofthecleaning
chamber. (Fig. 38)
You can simply pour the cleaning uid down the sink.
3 Rinse the cleaning chamber under the tap (Fig. 39).
The cleaning chamber is not dishwasher-proof.
4 FillthecleaningchamberwithHQ200cleaninguiduptotheMAX
indication (Fig. 31).
5 Place the Jet Clean System back onto the cleaning
chamber. (Fig. 32)
Make sure the release buttons click back into place.
You can clean the Jet Clean System with a moist cloth.
Clean the cleaning chamber every 15 days.
Cleaning the shaving unit under the tap
1 Switch off the shaver.
2 Pull open the three shaving heads one by one (Fig. 40).
3 Rinse all three shaving heads and all three hair chambers under a
hot tap for 30 seconds. (Fig. 41)
Becarefulwithhotwater.Alwayscheckifthewaterisnottoohot,to
prevent your hands from getting burnt.
-
-
,
-
-
ENGLISH16