User manual

7 Insert the lug of the shaving unit into the slot in the top of the
shaver (1). Then press the shaving unit downwards (2) to attach
it to the shaver (‘click’) (Fig. 29).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
The best and most hygienic way to clean the shaver is in the Jet Clean
System. You can also rinse the shaver under the tap or clean it with
the brush supplied.
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
Clean the shaver after every shave for optimal shaving performance.
You can clean the outside of the shaver with a damp cloth.
Regular cleaning guarantees better shaving performance.

The Jet Clean System has three cleaning programs: the eco program, the
normal program and the intensive program. The shaver automatically
chooses the appropriate cleaning program.

Fill the cleaning chamber before rst use.
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
The holder automatically moves to the highest position.
3 Simultaneously press the release buttons on both sides of the
cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2). (Fig. 30)
The cleaning chamber remains behind.
4 Unscrewthecapfromthebottlewithcleaninguidandremove
the airtight seal.
-
-
-
-
-
,
,
ENGLISH14