User manual
Ordering parts
The following parts are available:
- HQ8500 adapter
- RQ10 Philips arcitec Shaving Unit
- HQ110 Philips Shaving Head Cleaning Spray
Environment
- Do not throw away the appliances with the normal household waste
at the end of their life, but hand them in at an ofcial collection point
for recycling. By doing this, you help to preserve the
environment (Fig. 33).
- The built-in rechargeable shaver battery contains substances that may
pollute the environment. Always remove the battery before you
discard or hand in the shaver at an ofcial collection point. Dispose of
the battery at an ofcial collection point for batteries. If you have
trouble removing the battery, you can also take the appliance to a
Philips service centre. The staff of this centre will remove the battery
for you and will dispose of it in an environmentally safe way.
Only remove the battery when you discard the shaver. Make sure the
battery is completely empty when you remove it.
1 Remove the shaver from the Power Pod.
2 Let the shaver run until it stops.
3 Pull the shaving unit off the shaver.
4 Undo the 2 screws on the back of the shaver. (Fig. 34)
5 Insert a screwdriver between the front and back panel to open
the shaver. (Fig. 35)
6 Remove the side panels (Fig. 36).
7 Unscrew the 3 screws on the inside of the shaver and remove the
back cover (Fig. 37).
ENGLISH 15