Specifications

(Communication Error)
B-pm QiN cable IS
disconnected from the
CDX mechanrsm or
source unit
CDX cable IS mtermittent
or severely damaged
CDX cable IS disconnect-
ed from the Source Unit
or CD Changer
Communication Issue
Disc load/unload prob-
lem
Check the connection of B-pin DIN
cable between the CDX and unit
Check connections and reparr or
replace CDX cable as necessary
Check connections at the Source unit
and CD Changer and reparr wiring as
necessary
Press Reset on CD Changer
Press Reset on CD Changer. If CD
Changer still does not operate, see
your Local Authorized Rockford
Fosgate Dealer
(I.ED does not
ilIummate)
Batterres are weak
Excesswe dirt or dust on
IR Remote transmitter
lens
Excessrve dirt or dust on
source unit receiver lens
IR remote IS outsrde of
optimum transmitting
range
High sunlight conditions
Eatterres are dead
Battery IS mstalled mcor-
rectly
Check battery condition and replace
as necessary with (1) CR2025 (+3 volt)
battery
Clean transmitter lens with Plexrglas
soiution and a non-abraswe cloth as
necessary
Clean recewer lens (compact disc
logo) with Plexiglas solution and a
non-abrasrve cloth as necessary
Operate IR remote within about 15 ft
and lr45” from horrzontal of the
Source unit’s faceplate
Operate IR remote closer to Source
Unit
Check battery condition and replace
as necessary with (1) CR2025 (+3 volt)
battery
Check battery mstallation and reparr
as necessary (polarrty IS indicated on
pc board)
- 46 -