Specifications

Voltage applied to Yellow
wire is not between 10.8
and 16 volts or there is
no voitage present
Check battery, connections and fuses,
and repair or replace as necessary. If
voltage IS above +1S volts, have the
electrical system inspected by an
authorized car servuze center
E 1
(Initialize Error)
No inrtlaiizatron Press the reset button
and loading motor (or
drlvrng circuit) IS defec-
Forergn objects are pre- Check CDP mechanism load area by
removmg faceplate and repair as nec-
Foreign objects are pre- Check CDP mechanism eject area by
--7
(Eject Eiror)
venting disc from ejecti:ig removmg faceplate and reparr as nec-
Eject area In mechanism
and ejectrng motor (or dn-
(Transverse Error)
switch 1s detective.
Disc IS warped cracked or
severely damaged
Repair the mechamsm and loading
motor (or drrvrng circuit)
Check CD mechamsm motor, switch
and transverse area.
Put In a different disc!
Excessive scratches on
Put in a different disc!
ancsm IS not operating
Check the servo circuit area and
repau as necessary
-43 -