Specifications

深圳市创荣发电子有限公司
SHENZHEN C&D ELECTRONICS CO., LTD.
Page 20/30
六、产品功能 Software function
1.LED Pattern definitions( Orange)
指示
[Blink] 250ms ON / 250ms OFF ,提示蓝牙连接状态.
[Fast Blink] 150ms ON / 150ms OFF, 提示遥控器在广播状态，BLE 未连接.
1. Pairing 配对
[Start]
① Press any buttons when bonding cache is NULL.
② Or Press and hold [Google Assistant ] and [VOL-] key for 3 seconds
[Pairing timeout]
① 30sec
[LED behavior]
- LED blink while pairing process
- LED fast blink 5 times when pairing completion
2. UnPairing 取消配对
[Start]
- Press and hold [SAP] and [CC] key for 3 seconds
[LED behavior]
- LED keep to light up fast blink 9 times when UnPairing completion
[Code sending]
- Send code: 0x7A by IR when UnPairing completion
3. Device Bonding
-Remote only supports one bonded host
-Existing bond severed only after the new bonding is successfully completed
-Unpairing from the Host clears bonding cache
-Operating Unpairing key function clears bonding cache
4. Voice search
[Start]
- Push [Google Assistant ] key
[LED behavior]
- LED turns on after ACK from host when voice search is ready
- LED turns off after end of speech is detected from the host, or
- LED turns off after 30 seconds of time out
5. Bug Report
[Start]
- Output the key code during pressing and holding [OK] and [BACK]
[Code sending]
- Send code: 0x83 by IR
6. Talk Back
[Start]
- Output the key code during pressing and holding [DOWN] and [BACK]