REM380 Manual Engl 12/28/99 12:10 PM Page 1 REM380 I-TV Universal Remote Control User’s Guide TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . 2 Keys And Functions . . . . . . . . . . . . . . 2 Setting Up Your Remote Control . . . . . 3 About Batteries . . . . . . . . . . . . . . . . . 4 Using The Lighted Keypad . . . . . . . . . 4 Programming Your Remote Control. . . 5 Operating Your Remote Control. . . . . . 8 About Other Features . . . . . . . . . . . .
REM380 Manual Engl 12/28/99 12:10 PM Page 2 INTRODUCTION The I-TV Universal Remote Control is the complete solution for all of your interactivetelevision remote control needs.It can be programmed to operate a variety of components, up to six at a time,and is packed with easy-touse features such as: • Auto Scan code search to help program remote control for a variety of components, including older/discontinued models.
REM380 Manual Engl 12/28/99 12:10 PM Page 3 KEYS AND FUNCTIONS (continued) Key Charts 1 Red Indicator Light The Red Indicator Light blinks to show that the remote control is working and also provides feedback during programming sequences. 2 Component Keys Press TV, VCR, CBL, AUD, DSS, or CD once to select a home entertainment component to control. 3 CH Keys Use CH + (or CH -) to select the next higher (or lower) channel for the selected home entertainment component.
REM380 Manual Engl 12/28/99 12:10 PM Page 4 ABOUT BATTERIES NOTE: The I-TV requires four (4) new “AAA” alkaline batteries (not supplied). Do not mix old and new batteries or mix alkaline with manganese-type batteries. 4. Test the unit by pressing POWER and any Component key (e.g., TV, VCR, CBL, etc.). If the batteries are inserted correctly, the red indicator light will blink once.
REM380 Manual Engl 12/28/99 12:10 PM Page 5 PROGRAMMING YOUR REMOTE CONTROL Philips/Magnavox Components To Manually Program The Remote Control: The I-TV remote control can control up to six different components and is already pre-programmed for use with newer Philips/ Magnavox audio/video equipment. Unless you want to change a factory setting,skip the programming instructions and simply start using your new remote control.
REM380 Manual Engl 12/28/99 12:10 PM Page 6 PROGRAMMING YOUR REMOTE CONTROL (continued) Programming A TV/VCR Combo 6. (continued) If there is no separate TV code listed, you will need to perform the following steps to access volume control: Perform the following instructions to have the I-TV control a TV/VCR Combo. For Sharp and Sony models, also see page 13. IMPORTANT: Please completely read and review these steps before proceeding.
REM380 Manual Engl 12/28/99 12:10 PM Page 7 PROGRAMMING YOUR REMOTE CONTROL (continued) Checking The Auto Scan Codes Re-Assigning Component Keys If you have set up the remote control using Auto Scan, you can now find out which fourdigit code is operating your component: The I-TV remote can be set up to control any combination of six home entertainment components.By following these instructions, you can re-assign or duplicate a component key onto an unused component key. 1. 2. 3. 4.
REM380 Manual Engl 12/28/99 12:10 PM Page 8 OPERATING YOUR REMOTE CONTROL The I-TV Universal Remote Control is designed to be an enhanced replacement for your original remote control.Although most keys operate the same (see Key Charts on page 3), some do differ or provide unique features as described below. If your original remote control includes a SELECT key, then the I-TV’s SELECT key will operate in the same manner for the selected component.
REM380 Manual Engl 12/28/99 12:10 PM Page 9 OPERATING YOUR REMOTE CONTROL MCP Key (continued) 4. On the remote control, press TV, VCR, CBL, or DSS once. To Clear The MCP Key: Enter 7-1. On the remote control,press and hold SET until the red light blinks twice, then release SET. 5. 2. Enter 9-9-5. The red light will blink twice. 6. 3. Press MCP once. Programming A Secondary MCP Key With Instant Channel Selection 4. Press and hold SET until the red light blinks twice, then release SET.
REM380 Manual Engl 12/28/99 12:10 PM Page 10 ABOUT OTHER FEATURES Volume Lock Punch Through The I-TV remote control is set at the factory to control the volume independently while in the TV,VCR, DSS, CBL,AUD, and CD modes. The VCR Transport Keys (i.e., REW, PLAY, FFWD, REC, STOP, and PAUSE) are set at the factory to control the VCR,even if TV,CBL,or DSS is the selected mode. In other words, VCR control “punches through”regardless of what mode is on.
REM380 Manual Engl 12/28/99 12:10 PM Page 11 QUICK FEATURES SETUP GUIDE This guide is provided here for your convenience as a quick reference for performing remote control sequences. If you need more details, reread the full instructions presented in earlier pages. Component Setup # # # # x2 x2 Turn on component (e.g., TV). Press component key once (e.g., TV). Press SET until Red Light blinks twice; release SET. Enter 4-digit code for your brand; Red Light blinks twice after last #.
REM380 Manual Engl 12/28/99 12:10 PM Page 12 QUICK FEATURES SETUP GUIDE (continued) Device Re-Assignment (e.g., AUD Key Becomes Secondary VCR Key) x2 x2 Press SET until Red Light blinks twice; release SET. Enter 9-9-2; the Red Light will blink twice. Press component key to be moved once (e.g.,VCR). Press component key to be reassigned once (e.g., AUD). Red Light will blink twice. Reassigned key is now ready for programming.
REM380 Manual Engl 12/28/99 12:10 PM Page 13 TROUBLESHOOTING PROBLEM: Red Indicator Light does not blink when you press a key. SOLUTION: Replace the batteries with four (4) new “AAA” alkaline batteries (see page 4). PROBLEM: The VOL+, VOL–, and MUTE keys are not functional. SOLUTION: Make sure the remote control is not in the I-TV mode, and that volume control is locked to a component that has volume capabilities and is programmed into the I-TV remote control.
REM380 Manual Engl 12/28/99 12:10 PM Page 14 MANUFACTURER’S CODES Setup Codes for TVs: A-Mark AOC Abex Admiral Adventura Aiko Akai Alaron Ambassador America Action Ampro Anam Anam National Archer Astro Text Audiovox Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic CCE CXC Candle Carnivale Carver Celebrity Cineral Citizen Clairtone Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Dwin Electroband Electrohome Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralt
REM380 Manual Engl 12/28/99 12:10 PM Page 15 MANUFACTURER’S CODES Setup Codes for TVs (cont.
REM380 Manual Engl 12/28/99 12:10 PM Page 16 MANUFACTURER’S CODES Setup Codes for VCRs (cont.
REM380 Manual Engl 12/28/99 12:10 PM Page 17 MANUFACTURER’S CODES Setup Codes for Cable Converters (continued): Popular Mechanics Prelude Proscan Pulsar Quasar RCA Radio Shack Realistic Recoton Regal Regency Rembrandt Runco SL Marx Samsung Scientific Atlanta Seam Signal Signature Sprucer StarSight Starcom Stargate Starquest Sylvania TFC TV86 Tandy TeleCaption Teleview Texscan Timeless Tocom Toshiba Tusa Unika United Artists Universal Viewstar Zenith Zentek 0429 0799 0050 0029 0029 0050 0044, 0344, 0826,
REM380 Manual Engl 12/28/99 12:10 PM Page 18 MANUFACTURER’S CODES Setup Codes for CD Players (continued): Sharp Sherwood Shure Signature Sony Soundesign Sylvania Tascam Teac Technics Toshiba Vector Research Victor Wards Yamaha Yorx Zenith 0066, 0209, 0890 0143, 0209, 0225, 0455 0072 0137 0029, 0214, 0519, 0633, 0634 0174, 0454 0254 0449 0203, 0209, 0407, 0422, 0449 0058, 0236, 0332 0048, 0328 0062, 0223, 0446 0101 0082, 0137, 0186 0065, 0199, 0216, 0290 0490 0644 Setup Codes for DVD Players: Harman/Kar
REM380 Manual Engl 12/28/99 12:10 PM Page 19 MANUFACTURER’S CODES (continued) Setup Codes for Audio Amplifiers: Setup Codes for DBS Audio: Aiwa Carver Curtis Mathes Denon GE Harman/Kardon JVC Linn Luxman Magnavox Marantz Nakamichi Optimus Panasonic Philips Pioneer Realistic Sansui Sony Soundesign Technics Victor Wards Yamaha Aiwa Fisher Harman/Kardon JBL JVC Jerrold Nikko Paramount Pictures RCA SSI Schneider Scientific Atlanta Sony Soundesign Starcom Yorx 0435 0298 0329 0189 0107 0921 0360 0298 0194
