User manual

Problem Possible cause Solution
The temperature
of the shaver is too
high. In this case,
the shaver does not
work.
As soon as the temperature
of the shaver has dropped
sufciently, you can switch
on the shaver again.
PT920CC:The
shaver is not
entirely clean
after I clean it
in the Jet Clean
System.
The cleaning uid
in the cleaning
chamber is soiled.
Empty and rinse the
cleaning chamber (see
section ‘Cleaning the shaving
unit in the Jet Clean System’
in chapter ‘Cleaning and
maintenance’).
The cleaning uid
level is too low. If the
uid volume in the
cleaning chamber
drops below the
minimum level
during the cleaning
program, the
program aborts.The
cleaning symbol and
the ‘uid low’ symbol
ash at intervals
and the holder
returns to its starting
position.
Rell the cleaning chamber
with cleaning uid up to
the MAX level (see section
‘Cleaning the shaving unit
in the Jet Clean System’
in chapter ‘Cleaning and
maintenance’).
You have used
another cleaning
uid than the original
Philips cleaning uid.
Only use Jet Clean solution
HQ200.
ENGLISH26