User manual

Problem Possible cause Solution
The shaver does
not shave as well
as it used to.
The Jet
Clean System
(PT920CC)has not
cleaned the shaver
properly because
the cleaning uid
in the cleaning
chamber is soiled
or the cleaning uid
level is too low.
Clean the shaver thoroughly
before you continue shaving.
If necessary, clean and
rell the cleaning chamber
(see chapter ‘Cleaning and
maintenance’).
The shaving heads
are damaged or
worn.
Replace the shaving heads
(see chapter ‘Replacing the
shaving heads’).
Long hairs obstruct
the shaving heads.
Clean the shaving heads
one by one (see section
‘Cleaning the shaving unit
with the cleaning brush’
in chapter ‘Cleaning and
maintenance’).
You have not
inserted the shaving
heads properly.
Make sure that the
projections of the shaving
heads t exactly into the
recesses (see section
‘Cleaning the shaving unit
with the cleaning brush’).
The shaver does
not work when I
press the on/off
button.
The rechargeable
battery is empty.
Recharge the battery (see
chapter ‘Charging’) or
connect the shaver to the
mains.
ENGLISH 25