User manual

, The shaver holder automatically moves to its
highest position.
The Jet Clean System is now ready for use.
Using the Jet Clean System
1 Place the shaver without protection cap upside
down in the shaver holder. Push down the
locking lever completely to lock the shaver
into place.
, The battery symbol on the Jet Clean System
goes on to indicate that the shaver is being
charged.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
2 Press the on/off button on the Jet Clean
System to start the cleaning program.
, The battery symbol on the Jet Clean System
goes out.
, During the cleaning program, the cleaning
symbol starts to ash and the shaver is
automatically lowered into the cleaning uid.
, The shaver automatically switches on and off
several times and moves up and down.
, The cleaning symbol ashes throughout the
cleaning program, which takes approx. 8 minutes.
, After the cleaning program, the battery symbol
on the Jet Clean System goes on to indicate that
the shaver is being charged.
Note: If you press the on/off button of the Jet
Clean System during the cleaning program, the
program aborts and resets. In this case, the cleaning
symbol stops ashing and the shaver returns to its
starting position. The shaver may still be wet and dirty,
because the cleaning program has not been nished.
ENGLISH18