Cover Enregistrez votre produit et bénéficiez d’une assistance à l’adresse suivantet www.philips.
1
PT860,PT735,PT730,PT725,PT720 English 6 Français (Canada) 19
English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Please read this user manual, as it contains information about the wonderful features of this shaver as well as some tips to make shaving easier and more enjoyable. General description (Fig.
English 7 -- The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -- Children should be supervised to ensure that they do not play with the appliance. -- Always unplug the shaver before you clean it under the tap. Caution -- Never immerse the shaver in water.
English Compliance with standards -- The shaver complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. -- The shaver complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, they are safe to use based on scientific evidence available today.
English 9 Charge indications Battery low -- When the battery is almost empty (when there are only 5 or fewer shaving minutes left), the charging light starts to flash orange. -- When you switch off the shaver, the charging light continues to flash orange for a few seconds. Quick charging -- When you start charging the empty battery, the charging light alternately flashes orange and green. After approx. 3 minutes, the charging light continues to flash green.
English Using the shaver Note:You can also use the shaver directly from the mains. Simply connect the shaver to the mains. Shaving 1 Press the on/off button once to switch on the shaver. 2 Move the shaving heads over your skin. Make circular movements. -- Do not make straight movements. -- Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 Press the on/off button once to switch off the shaver. 4 Clean the shaver (see chapter ‘Cleaning and maintenance’).
English 11 Cleaning and maintenance Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. -- Clean the shaver after every shave for optimal shaving performance. -- Regular cleaning guarantees better shaving performance. -- For the best cleaning results, we advise you to use the Philips Cleaning spray (HQ110). -- Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.
English -- Rinse the hair chamber and the inside of the shaving unit. -- Rinse the outside of the shaving unit. 4 Close the shaving unit and shake off excess water. Be careful not to hit the shaving unit against anything while shaking off excess water. Never dry the shaving unit and the hair chamber with a towel or tissue, as this may damage the shaving heads and the coupling spindles. 5 Open the shaving unit again and leave it open to let the shaver dry completely.
English 13 4 Turn the lock anticlockwise (1) and remove the retaining frame (2). 5 Remove and clean one shaving head at a time. Each shaving head consists of a cutter and a guard. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. -- Remove the cutter from the shaving guard and clean it with the brush.
English PT860/PT735/PT730: Make sure that the projections of the shaving heads fit exactly into the recesses. 7 Put the retaining frame back into the shaving unit and turn the lock clockwise. 8 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then close the shaving unit (2). Note: If the shaving unit does not close smoothly, check if you have inserted the shaving heads properly and if the retaining frame is locked.
English 15 Storage -- Put the protection cap on the shaver every time you have used it, to prevent damage. Replacement For maximum shaving performance, we advise you to replace the shaving heads every year. Replace damaged shaving heads right away. Only replace the shaving heads with original HQ8 Philips Shaving Heads. 1 Switch off the shaver and disconnect it from the mains. 2 Press the release button to open the shaving unit. 3 Pull the shaving unit off the shaver.
English 7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then close the shaving unit (2). Note: If the shaving unit does not close smoothly, check if you have inserted the shaving heads properly and if the retaining frame is locked. Accessories To retain the top performance of your shaver, make sure you clean it regularly and replace its shaving heads at the recommended time. Shaving heads -- We advise you to replace your shaving heads every year.
English 17 the battery, you can visit our website, www.philips.com/support or call toll free: 1-866800-9311. Removing the rechargeable shaver battery Only remove the rechargeable battery when you discard the shaver. Make sure the rechargeable battery is completely empty when you remove it. 1 Disconnect the shaver from the mains. 2 Let the shaver run until it stops. 3 Undo the screws in the back of the shaver and in the hair chamber. 4 Remove the front panel and the back panel.
English Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. Problem Possible cause The shaver does The shaving not shave as well heads are as it used to. damaged or worn. The shaver does not work when I press the on/off button. Solution Replace the shaving heads (see chapter ‘Replacement’). Long hairs obstruct the shaving heads.
Français (Canada) 19 Introduction Félicitations pour votre achat et bienvenue dans l’univers Philips! Pour profiter pleinement du soutien de Philips, enregistrez votre produit à l’adresse : www.philips.com/welcome. Veuillez lire ce manuel contenant des renseignements sur les caractéristiques fantastiques de ce rasoir ainsi que des conseils pour simplifier le rasage et le rendre plus agréable. Description générale (fig.
Français (Canada) -- Cet appareil ne doit pas être utilisé par des personnes (incluant des enfants) dont les capacités physiques, sensorielles ou mentales sont réduites, ou qui n’ont pas l’expérience et les connaissances nécessaires, à moins qu’elles ne soient sous la surveillance d’une personne responsable de leur sécurité ou qu’elles aient reçu de cette personne des directives concernant l’utilisation de l’appareil.
Français (Canada) 21 -- Placez et utilisez toujours le rasoir sur une surface imperméable. -- Utilisez exclusivement l’adaptateur, le chargeur et les accessoires fournis. -- Placez toujours le capuchon de protection sur le rasoir afin d’en protéger les têtes lorsque vous êtes en voyage. Conformité aux normes -- Le rasoir respecte les normes de sécurité internationales de la CEI et peut être nettoyé à l’eau courante en toute sécurité.
Français (Canada) Le nombre de rasages sans fil peut être inférieur à 17 (PT860) ou 14 (PT735/PT730/PT725/PT720) selon vos habitudes de rasage et de nettoyage ou selon votre type de barbe. Informations relatives à la charge Pile faible -- Lorsque la pile est presque entièrement déchargée (c’est-à-dire lorsqu’il ne reste que 5 minutes de rasage ou moins), le voyant de charge se met à clignoter en orange.
Français (Canada) 23 Chargement à l’aide de l’adaptateur 1 Insérez la petite fiche dans le rasoir. 2 Branchez l’adaptateur dans une prise murale. ,, Le témoin de charge indique l’état de chargement du rasoir (voir la section «Informations relatives à la charge» de ce chapitre). Utilisation du rasoir Remarque :Vous pouvez aussi simplement brancher l’appareil sur une prise secteur. Rasage 1 Mettez l’appareil en marche en appuyant une fois sur le bouton marche/arrêt.
Français (Canada) Tonte (PT860 seulement) Vous pouvez utiliser le taille-favoris pour tailler vos favoris et votre moustache. 1 Mettez l’appareil en marche en appuyant une fois sur le bouton marche/arrêt. 2 Ouvrez le taille-favoris en poussant la glissière vers le bas. ,, Vous pouvez commencer la taille. 3 Après la taille, fermez le taille-favoris et éteignez le rasoir.
Français (Canada) 25 Remarque : Il est possible que de l’eau s’écoule de la prise au bas du rasoir au cours du rinçage. C’est normal et sans danger car tous les composants électroniques sont regroupés dans un boîtier hermétique à l’intérieur du rasoir. Nettoyage de l’unité de rasage sous le robinet 1 Éteignez le rasoir et débranchez-le de la prise secteur. 2 Appuyez sur le bouton de libération pour ouvrir l’unité de rasage.
Français (Canada) Nettoyage de l’unité de rasage avec la brosse 1 Éteignez le rasoir et débranchez-le de la prise secteur. 2 Appuyez sur le bouton de libération pour ouvrir l’unité de rasage. 3 Détachez l’unité de rasage du rasoir. 4 Tournez le verrou dans le sens anti-horaire (1) et retirez le système de fixation (2). 5 Ne retirez et ne nettoyez qu’une seule tête de rasoir à la fois. Chaque tête est composée d’une lame et d’un dresse-poils.
Français (Canada) 27 -- Retirez la lame du dresse-poils et nettoyez-la à l’aide de la brosse. -- Nettoyez l’intérieur et l’extérieur du dresse-poils à l’aide de la brosse. 6 Remettez les têtes du rasoir dans l’unité de rasage. PT860/PT735/PT730 :Veillez à ce que les saillies des têtes de rasoir s’imbriquent parfaitement dans les creux. 7 Remettez le système de fixation dans l’unité de rasage et tournez le verrou dans le sens horaire.
Français (Canada) Nettoyage du taille-favoris avec la brosse (PT860 seulement) Nettoyez le taille-favoris après chaque utilisation. 1 Éteignez le rasoir et débranchez-le de la prise secteur. 2 Ouvrez le taille-favoris en poussant la glissière vers le bas. 3 Nettoyez le taille-favoris avec l’extrémité à poils courts de la brosse de nettoyage. Brossez les lames du taille-favoris dans un mouvement de haut en bas. 4 Fermez le taille-favoris (vous devez entendre un «clic»).
Français (Canada) 29 Ne les remplacez que par des têtes de rasoir Philips HQ8 d’origine. 1 Éteignez le rasoir et débranchez-le de la prise secteur. 2 Appuyez sur le bouton de libération pour ouvrir l’unité de rasage. 3 Détachez l’unité de rasage du rasoir. 4 Tournez le verrou dans le sens anti-horaire (1) et retirez le système de fixation (2). 5 Retirez les têtes du rasoir et insérez les nouvelles têtes dans l’unité de rasage.
Français (Canada) Têtes de rasage -- Nous vous conseillons de remplacer les têtes de votre rasoir chaque année en utilisant exclusivement les modèles HQ8. Nettoyage -- Pour bien nettoyer les têtes de votre rasoir, servez-vous du spray nettoyant (HQ110). Environnement -- Si vous n’avez plus besoin des appareils et que vous désirez les mettre au rebut, ne les jetez pas avec les ordures ménagères. Déposez-les dans un point de collecte de recyclage.
Français (Canada) 31 3 Retirez les vis au dos du rasoir et du compartiment de récupération des poils. 4 Retirez le panneau avant et le panneau arrière. 5 Pliez les 6 crochets sur les côtés pour retirer le bloc d’alimentation. Attention, les crochets sont pointus. 6 Retirez la pile. Soyez prudent, car les languettes de la pile sont coupantes. Ne branchez pas le rasoir sur le secteur après avoir retiré la pile rechargeable.
Français (Canada) Problème Cause possible Solution Les résultats de rasage ne sont pas aussi satisfaisants que d’habitude. Les têtes du rasoir sont endommagées ou usées. Remplacez les têtes du rasoir (voir le chapitre «Remplacement»). Les têtes du rasoir sont bloquées par de longs poils. Nettoyez les têtes de rasoir l’une après l’autre (voir la section «Nettoyage de l’unité de rasage avec la brosse» du chapitre «Nettoyage et entretien»). Vous n’avez pas correctement inséré les têtes du rasoir.
4222.002.5241.