XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 2 Philips Home Cinema Projector 2 English User guide LC 6281 / LC 6285
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 3 Index Things you should know Important Safeguards 5 6-7 1. Introduction 8-9 Packaging contents 8 Optional accessories 9 Service accessories 9 2. Functional overview 10-14 Controls 10-11 Remote control 12-13 Connections 14 3. Set up 4.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 4 Index 5. Operation 6. Maintenance 7.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 5 Things you should know < Note:This equipment has been tested to comply with the limits for a class B digital device in accordance with Part 15 of the FCC Rules as well as the European CE marking and Canadian ICES-003.. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 6 Important Safeguards S > CAUTION: Please read all of these instructions before you operate your projector. Save these instructions for future reference. Electrical energy can perform many useful functions. This projector has been engineered and manufactured to meet applicable safety standards. IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 7 Important Safeguards < 12. As a safety feature, this projector is equipped with mains lead with a 3-pin grounded plug (for USA-versions only) or a 2-pin grounded plug (for European versions only).The 3-pin/2- pin grounded plug will fit only into a grounding type mains outlet. If the plug does not fit, use an adapter that is properly grounded or have an electrician install a grounded type outlet. Do not attempt to modify this AC plug. 13.
1. Introduction > Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. We are sure that, used properly, it will bring you years of enjoyment.You will want to keep this manual handy, as it is a convenient source of information about your projector. For your own protection and prolonged operation of your projector, please read the enclosed Safety Sheet. Packaging contents Please confirm that the following items are packed in the projector box.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 9 1.
2. Functional overview y On / Standby 1 Standby/Remote control indicator Error indicator 2 IR sensor 3 To switch the projector in or out of the Power/Standby mode.
2. Functional overview Cursor Control @ Philips Home Cinema Projector Controls < When the menu is active the Cursor Control controls the menu cursor to navigate through the On Screen Display (OSD) menu.The cursor control works with up/down and left/right button operation.
Remote control > 2. Functional overview y Standby 1 E Picture format 2 Smart picture 3 Picture size – / + 4 Child lock 5 Menu 6 Cursor Control 7 –E+8 A(udio)/V(ideo) Mute 9 To switch the projector in or out of the Power/Standby mode. To select one of the six available picture format options (wide screen, super zoom 4:3, 4:3, movie expand 14:9, movie expand 16:9, 16:9 subtitles). To select specific picture characteristics for different input sources.
2. Functional overview OK $ s Mute % Keystone ^ Source selection buttons & Crystal Clear Demo ^ Keystone & Remote control < To confirm actions in the menu when the menu is on screen. To mute the sound of the projector. Only on LC 6281 remote control To correct picture distortion of the vertical keystone type by internal scaling. To select the current projection source (Component, S-Video,Video, Multimedia). Only onLC 6285 remote control CrystalClear picture enhancement demo.
2. Functional overview Component in 1 (PR/R, PB/B,Y/G, S) S-Video 2 Video 3 Audio L/R 4 Multimedia 5 Filter 6 Video source connections Input sockets to connect to DVD- and HDTV-video equipment These sockets can be connected to the following output sockets:YPbPr, RGBsync, RGsogB, (480p, 720p, 1080 i). Input socket to connect to the S-Video out socket of a S- video recorder, a VCR, DVD player, video camera or TV with AV output socket. This socket can be connected to a S-Video (Y/C) output socket.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 15 3. Set up Positioning the projector and screen > SCREEN A B SCREEN Front projection Ceiling front projection A SCREEN B SCREEN Rear projection • • • • • • Place the projector on a stable, level surface, out of direct sunlight and away from sources of excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields. Allow sufficient cooling of the product by keeping all air inlets and outlets clear from obstructions.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 16 Image offset (cm) Lens axis 100% > Lens offset (%) 3.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 17 3. Set up < To switch off the mains supply completely, disconnect the mains lead. 6 – Save energy! Please put the projector in the Power/Standby position if you are not going to use the projector for more than 15 minutes. – If SmartSave is enabled, the projector will switch to StandBy after the selected time. If SmartSave is not enabled, the projector will not switch to StandBy.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 18 3. Set up Vertical and horizontal keystone correction on LC 6285 1 Press Keystone. Moving/transporting the projector Note – The keystone correction screen appears. 2 3 • Use Cursor Control up and/or down to widen/narrow the image in vertical direction. Use Cursor Control left and/or right to widen/narrow the image in horizontal direction.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 19 4. Installation General information General information < Video input The projector accepts the input signal of all major video formats: Video (CVBS) S-Video (Y/C): NTSC 3.58, 4.43, PAL B, G, D, H, I, N, M and SECAM B, D, G, K, K1, L. Component video:YPbPr, RGBsync, RGsogB. EDTV/HDTV: 480p, 575p, 720p/(50/60), 1035i/(30), 1080i/(25/30/AUS), 1080p/(30). The projector will recognize these standards and adapt to them automatically.
4. Installation > CVBS (Video) only MULTIMEDIA PR/R Y/G PB/B S S-VIDEO VIDEO AUDIO-L AUDIO-R FILTER S-VHS (S-Video) only 2 1a 1b VCR S-Video out L Audio R out Video out CVBS only CVBS (Video) only Video (CVBS) 1 2 S-Video 1 2 Scart connection Connect the Video (out) socket of a VCR, DVD player, video camera or TV to the Video (in) socket of the projector. For this, use the video/audio connection cable (1a) supplied.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 21 Connecting to video equipment > 4. Installation S-Video R Y G B MULTIMEDIA PR/R Y/G PB/B S S-VIDEO VIDEO AUDIO-L AUDIO-R FILTER 2 1 Component/HDTV equipment 2 DVD player, Settop Box, HDTV receiver, etc. Cr Pr R Component/HDTV Y Y G Cb Pb B Audio out R L YPbPr/RGsogB • Connect the Component in sockets of the projector (Pr/R, Pb/B,Y/G) to the appropriate output sockets of your Component- or HDTV-video equipment (YPbPr/YCbCr/RGB).
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 22 Connecting to video equipment > 4. Installation MULTIMEDIA PR/R Y/G PB/B S S-VIDEO VIDEO AUDIO-L AUDIO-R FILTER 2 1 3 Audio out R L Component/HDTV equipment DVD player, Settop Box, HDTV receiver, etc. Scart connection RGBS 1 Connect the Scart/RCA Component Video adapter supplied (1) to the Scart connector of your Component- or HDTV-video equipment.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 23 4. Installation Note Philips Home Cinema Projector Connecting to video equipment < 5 Use Cursor Control right to select ‘YPbPr’ or ‘RGsogB’. 6 Confirm with OK. The Scart/RCA Component Video adapter and the Component cable are are only supplied with the LC6285 projector. For LC6281 an optional cable and adapter have to be used.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 24 Connecting to a computer < 4. Installation MULTIMEDIA PR/R Y/G PB/B S S-VIDEO VIDEO AUDIO-L AUDIO-R FILTER (1) Mac/PC VGA/MAC adapter Data out PC/Macintosh • Connect the Data (out) socket of the computer to the Multimedia socket of the projector and secure the plugs by tightening the thumb screws. For this, use the VGA cable supplied (1).
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 25 Preparation > 5. Operation General 1 – Press the y Standby button to switch on the projector. The Standby indicator starts blinking green. – When the projection lamp is on, the Standby indicator lights up green and the start-up screen (when enabled) appears for several seconds.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 26 5. Operation Preparation < Feedback messages Feedback messages are displayed in the top right corner of the screen.They are displayed e.g.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 27 On Screen Display Menu > 5.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 28 On Screen Display Menu > 5.
GENERAL ADJUSTMENTS/SETTINGS Main menu Sub menu Set up Language Setting Deutsch English Français Español Italiano Nederlands Português ∑ 0.50 x - 1.00 x Picture size Keystone - Vertical correction - Horizontal correction (LC6285 only) Source SmartSave Mirror Feedback Lamp counter System information Factory settings Auto Component Selection Auto RGB sync YPbPr RGB sog S-Video Video Multimedia Off 5 - 60 minutes Off On Lamp used for: 0 hrs. OK OK (3 sec.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 30 On Screen Display Menu > 5. Operation General explanation 1 Press Menu. – The menu bar appears on the screen. The ‘Picture’ item is highlighted.
5. Operation Video/S-Video/Component adjustments On Screen Display Menu > For Video/S-Video/Component signal input, the following ‘Picture’ and ‘Features’ adjustments can be made: STAND BY MENU OK PICTURE FORMAT AV MUTE SMART PICTURE VOLUME + PICTURE SIZE MIRROR COMPONENT S-VIDEO CHILD LOCK MULTIMEDIA PICTURE SIZE – PICTURE SIZE + MENU FREEZE ZOOM VIDEO INFO OK KEYSTONE VOLUME – SOURCE MUTE Picture adjustments • Press Menu and select ‘Picture’ in the menu bar.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 32 5. Operation Multimedia adjustments On Screen Display Menu > For Multimedia signal input, the following ‘Picture’ and ‘Features’ adjustments can be made.
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 33 5.
5. Operation Examples MENU OK On Screen Display Menu > The following settings/adjustments follow a slightly different procedure or may need some further explanation. VOLUME + PICTURE SIZE – Zoom/Magnification ‘Zoom’ is used to enlarge a part of the picture. 1 Press Menu. – The menu bar appears on the screen. 2 Use Cursor Control to select ‘Zoom’ in the Features menu. 3 Use the Cursor Control to adjust the Zoom factor in the ‘Magnification’ slider (4x, 9x or 16x).
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 35 5. Operation Notes On Screen Display Menu > • To exchange the pictures, projected on the main screen and in the PIP window press Swap Picture source on the remote control. – Pressing the PIP button on the remote control, will immediately bring up the PIP window (step 3). Pressing the PIP button twice in succession will switch off the PIP function. High resolution pictures from data sources can only be projected in the PIP formats Medium or Large.
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 36 6. Maintenance Cleaning Caution STANDBY/ON > Switch off and disconnect the projector before cleaning. 1 Press the y On-StaStandby button twice to switch off the projector. – The Standby indicator starts blinking red. 2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in Standby) and disconnect the mains lead and all other cables.
6. Maintenance Lamp STAND BY MENU OK PICTURE FORMAT AV MUTE SMART PICTURE VOLUME + PICTURE SIZE MIRROR COMPONENT S-VIDEO CHILD LOCK MULTIMEDIA PICTURE SIZE – PICTURE SIZE + MENU FREEZE ZOOM VIDEO INFO > When operation time reaches the last 100 hours of the average lamplife, the message ‘Warning: lamplife has almost expired’ will be displayed on the screen, each time the projector is switched on. The lamplife remaining can be checked using the OSD menu. 1 Press Menu.
6. Maintenance Lamp replacement 9 < Tighten screws B again. 10 Put the lamp door back in place. Resetting the lamplife time Philips Home Cinema Projector 11 12 13 14 Insert the mains lead into both the projector Mains inlet socket and the wall socket. Press the Standby button to switch on the projector. Reset the lamp life time (see ‘Resetting the lamplife time’). Dispose of the old lamp in special chemical disposal bins. 1 Press Menu. – 2 The menu bar appears on the screen.
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 39 7.Troubleshooting > If a fault occurs, first check the points listed below before taking the projector for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service organisation. Warning Under no circumstances should you try to repair the projector yourself as this could invalidate the guarantee.
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 40 7.Troubleshooting > In case of RGsogB (Scart) connection – ’RGsogB’ is not selected in the menu and ‘Auto Source’ is activated. In this case ‘Auto Source’ will not recognize ‘RGsogB’. • Select ‘RGsogB’ as projection source in the ‘Set up’ menu (‘Auto Component Selection’ sub menu). Poor colour • • Note Adjust ‘Brightness’, ‘Contrast’, ‘Tint’ or ‘Hue’ (see ’Picture adjustment’ under ‘Operation’ - ‘On Screen Display Menu’).
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 41 7.Troubleshooting Indicators < Standby/Remote control indicator (ring around Standby On button) – red: Power/Standby mode. – green: operation mode. – green blinking (slow): warming up. – red blinking (slow): cooling down. • Do not switch the projector off; it will restart the lamp automatically within a few seconds.
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 42 Philips Home Cinema Projector 42 English User guide LC 6281 / LC 6285
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 43 Philips Home Cinema Projector 43 English User guide LC 6281 / LC 6285
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 44 Philips Home Cinema Projector LC 6281 / LC 6285 3103 XXXXXX Printed in The Netherlands MM/RR/0335
