User manual

3 Press the release button (1) and pull the

shaving unit a straight up off the shaver (2).

4 Clean the inside of the shaving unit with the

cleaning brush.

5 Clean the hair chamber with the cleaning

brush.

6 Put the shaving unit back onto the shaver.

Every two months: shaving heads

Note: Do not use cleaning agents or alcohol to clean

the shaving heads.

1 Switch off the shaver.

2 Press the release button (1) and pull the

shaving unit straight up off the shaver (2).

3 To remove the retaining frame, push the sides

of the central spring towards each other (1).

Then lift the retaining frame out of the shaving

unit (2).

4 Slide the shaving heads out of the retaining

frame. Remove and clean one shaving head at a

time. Each shaving head consists of a cutter and

a guard.

Note: Do not clean more than one cutter and guard

at a time, since they are all matching sets. If you

accidentally mix up the cutters and guards, it may take

several weeks before optimal shaving performance is

restored.

5 Remove the guard from the cutter.

6 Clean it with the short-bristled side of the

cleaning brush. Brush carefully in the direction

of the arrows.

1 1

ENGLISH ENGLISH