User Manual PicoPix Pocket Projector PPX 4835 Register your product and get support at www.philips.
Table of contents Dear customer ........................................................... 3 About this user manual ........................................... 3 What's in the box ...................................................... 3 1 General safety information .................. 4 Setting up the device ............................................... 4 Power supply ............................................................. 4 Repairs ..................................................................
Dear customer What's in the box Thank you for purchasing our Pico Projector. 1 – PicoPix Projector We hope you enjoy your device and its many functions! 2 – Power supply with plug About this user manual With the installation guide on the following pages, you can start using your device quickly and easily. 3 – HDMI cable 4 – Quick Start Guide 5 – Carrying Pouch a b c Read the entire user manual carefully. Follow all safety instructions in order to ensure proper operation of your device.
1 General safety information Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated. Setting up the device The device is exclusively for indoor use. The device should be placed securely on a stable, flat surface.
Switch the device off using the power switch before removing the power supply from the socket. DANGER! Risk of explosion with incorrect type of batteries! Do not try to replace the battery yourself. There is a risk of explosion if the incorrect battery type is used. Turn off the device and remove it from the power supply before cleaning the surface. Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol).
2 Overview Top of the device Side view 1 – Focus wheel to adjust image sharpness CAUTION! 1 The distance to the projection surface 2 must be a minimum of 0.5 meters and a maximum of 5 meters. If the Pocket Projector is located outside of this range, it 3 will not be possible to focus the image. Turn the focus wheel carefully to avoid any damage. 2 – DC IN for power supply 3 – HDMI input 1 – Key – Go one level back in menu and one level back in directory, cancel a function.
Bottom of the device 1 – Tripod socket 1 Overview of the menu functions 1 After switching on your projector, press the à button to enter settings menu. 2 Select the desired option using the navigation keys ¡/¢. 3 Confirm with à button to enter the corresponding submenu. 4 Press the button to go one level back.
3 Initial operation Setting up the device Initial installation Place the projector on a flat surface in front of the projection surface. In case you need to tilt the device slightly upwards (e.g.: when using a tripod) you can correct the distortion by using the built-in keystone correction. 1 Push the POWER button for 3 seconds till the power indicator turns to green to turn the device on.
Image settings Keystone Use À/Á buttons to correct a distorted image. Eco mode: Increases the operating time for the built-in battery. Notice! The brightness will be reduced to save power! Projection mode Front: Normal projection; the device is located in front of the projection surface/ screen. Flashlight Rear: Rear projection; the device is located behind the projection surface, the image is horizontal mirrored.
4 Connecting other devices Only use the supplied cable or cables that are available as accessories to connect the projector. Connecting to devices with HDMI output (HDMI function) Use the HDMI to mini HDMI cable to connect the projector to a computer or laptop. US OUB 5V T 1A HD MI MH L DC IN 3 The mobile phone or other devices will be charged. Notice! Only when the projector is switched on (or in power bank mode), your mobile phone or other devices can be charged.
5 Functions Your projector can also be used as: pocket flashlight, SOS light or warning light. SOS light Your Pocket Projector is equipped with an SOS light function, using the official Morse code for SOS: 3x short flashes, 3x long flashes, 3x short flashes. CAUTION! These functions exhaust a lot of energy, make sure the battery is full charged before using. The device and its SOS light cannot be used as emergency beacon. 1 Switch the device on using the on/off on the side.
6 Maintenance Battery maintenance Cleaning the lens The capacity of the battery diminishes with time. To prolong the life of the battery, please observe the following instructions: Use a brush or lens cleaning paper for cleaning the lens of the projector. • Without a power supply, the device operates itself through the built-in battery. When the battery does not have sufficient capacity, the device will turn off. • When the device is in low battery, the battery icon in the status bar turns red.
Firmware update with USB stick Notice! Connect the power adapter when applying a firmware update. 1 Format a USB stick as FAT16 or FAT32 file system. 2 Copy the file of latest firmware to the root directory of the USB stick. 3 Insert the USB stick to the USB socket on the device. 4 Enter Settings menu by pressing à. 5 Select Maintenance – Firmware update and select YES. 6 After around 3 minutes, the firmware update will be completed and the device will restart.
Troubleshooting 1 Switch the device off using the on/off switch on the side. Power cycling 2 Wait at least ten seconds. If a problem occurs that cannot be corrected with the instructions in this user manual (see also the help below), follow the steps given here. 3 Switch the device on using the on/off switch on the side. 4 If the problem cannot be solved, please contact our customer service or your retailer. Problems Solutions Device turns off.
Problems Solutions Only the initial screen appears and not the image from the external device. • • Only the initial screen appears and not the image from the connected computer. • • • Maintenance Check if the cables are connected to the right sockets. Please check that the external device is switched on. Check that the HDMI cable is correctly connect to the computer's HDMI interface. Check if the resolution of the computer is set to 1280 x 720.
7 Appendix Technical data Accessories Dimensions (L×H×W) ................... 115 x 115 x 32 mm Weight ................................................................... 342 g Recommended Ambient ............................ 5–35 °C Relative Humidity.....20–80 % (non-condensing) Video connection ............. Mini-HDMI/MHL-port Headphone connection............................................. ...............................Stereo – jack plug: 3,5 mm MHL output ..............................
• Reorient or relocate the receiving antenna. • Increase the separation equipment and receiver. between the Hereby, X-GEM SAS declares that the equipment is in compliance with Directives 2014/30/ EU, 2014/35/EU, 2009/125/EC, 2011/65/EU. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. The full text of the EU declaration of conformity is available at the following internet address: www.philips.
Trademarks: The mentioned references in this manual are trademarks of the respective companies. The lack of the trademarks É and Ë does not justify the assumption that these dedicated terminologies are free trademarks. Other product names used herein are for identification purposes only and may be trademarks of their respective owners. X-GEM SAS disclaims any and all rights in those marks.
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by X-GEM SAS, further referred to in this document as X-GEM SAS, and is the manufacturer of the product. 2016 È X-GEM SAS. All rights reserved. Headquarters: X-GEM SAS 9 rue de la Négresse 64200 Biarritz – FRANCE Tel: +33 (0)5 59 41 53 10 www.xgem.
