Register your product and get support at www.philips.
Table of Contents Overview ................................................... 3 8 Digital TV Playback........................... 28 Dear Customer ................................................................... About this User Manual ..................................................... What's in the Box ............................................................... Product Highlights ..............................................................
Overview Dear Customer What's in the Box Thank you for purchasing our Pocket Projector. We hope you enjoy your device and its many functions! 1 – Remote Control 2 – PicoPix Projector 3 – Power supply 4 – USB cable 5 – HDMI cable 6 – Quick Start Guide 7 – Pouch About this User Manual With the installation guide on the following pages, you can start using your device quickly and easily. Detailed descriptions can be found in the following sections of this user manual. Read the entire user manual carefully.
1 General Safety Information Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated. Setting up the Device The product is for indoor use only. The device should be placed securely on a stable, flat surface.
Power Supply Wireless Network (WLAN) Use only the enclosed power adapter (see chapter Appendix / Technical Data). Check whether the electrical voltage of the power supply matches the electrical voltage available at the setup location. This equipment complies with the voltage type specified on the product. The product should be supplied by a power system compliant with LPS requirements of 2.5 of UL60950-1. The capacity of the battery diminishes with time.
2 Overview Top of the Device Rear/Side View 1 – Touchpad for navigation and operation of the mouse pointer (see also Touchpad / Gestures, page 8) 2 – LED status bar Blue: device switched on / device in standby Off: device off 3 – Focus wheel for image sharpness. 1 – Reset hole The Pocket Projector is unresponsive or hung up: insert a slim, pointy object into the reset hole to trigger a hardware reset.
1 ý – USB port for a USB storage device, DVB-T stick, mouse or keyboard. 2 – Lens Bottom of the Device 1 – Tripod socket 1 1 2 Pico Station Front View (not included) The Pico Station docking station has its own battery, with which you can extend the replay time of the device. The inbuilt speakers ensure improved sound quality during playback. 1 – PicoPix port 2 – Eject button 1 2 Available as accessories Pico Station with battery and speakers ................................................
Touchpad Input Area The touchpad is a touch-sensitive surface. Touch the touchpad with one or more fingers to move the cursor, navigate in the menu, select menu options or carry out other actions. The input area is limited by the navigation area/scrolling area. You can control the cursor using gestures in the input area. Ballpoint Pens! Do not use a ball-point pen or other objects to operate the touchpad. Hard and sharp objects may damage the touchpad.
Software Keyboard 1 Click in the input field (see also Touchpad / Gestures, page 8) using the touchpad or a mouse. 2 The software keyboard appears.. 3 Using the touchpad or a mouse enter the text on the software keyboard.
Remote Control B – Switches the device hibernation mode – Call the menu u – Call the main menu v – Call the search menu ¿ – One menu step back, one directory level back / cancelling a function w – Switch to the external video input HDMI, , or VGA x – DVB-T mode: change to favourites 1 Navigation keys à – Confirms selection / , À/Á – Navigation keys / navigate the menu / modify settings / – Modify settings / during music playback select previous, next title À/Á – During music playback adjust volum
Overview of the Menu Functions Symbols in the Statusbar 123456 1 After switching on the device the main menu appears. 2 Select the desired menu using the navigation keys À/Á. 3 Confirm with à. 4 By pressing the u key you will return to the main menu. 1 – WLAN status display 2 – USB storage device 3 – Memory card 4 – Internal memory 5 – Overheat symbol 6 – Charge level of the internal battery. The icon will be red, when the battery needs to be recharged.
3 Initial Operation Setting up the Device Notice Operate via Pico Station The battery of the Pocket Projector is empty: Connect the Pico Station to use the Pocket Projector. You can position the device so that it lies flat on a table in front of the projection surface; it is not necessary to tilt it towards the projection surface. The device compensates for the distortion from the slanted projection (pincushion distortion).
2 Insert the new batteries into the battery compartment with the positive and negative poles as shown on the back of the remote control. Make sure the polarities(+ and -) are aligned correctly. Using the Remote Control Point the remote control at the remote sensor on the back of the device. The remote can be used within an angle of 60 degrees and up to 16.4 feet (5 meters) from the device. When using the remote control, no obstacle should be placed between the remote control and remote sensor.
Initial Installation 1 Push for about 3 seconds the on/off switch on the side to turn the device on. 2 Turn the device towards a suitable projection surface or wall. Note that the distance to the projection surface must be a minimum of 1.6 feet (0.5 meters) and a maximum of 16.4 feet (5 meter)s. Make sure the projector is in a secure position. 3 Use the focus wheel on the top to adjust the image sharpness. 4 Select the desired menu language using / . 5 Confirm with à.
4 Connect to the Playback Device Supplied cables Connecting to an iPhone/ iPad/iPod HDMI cable USB cable Use the iPhone/iPad/iPod-HDMI cable (not supplied) to connect the projector to an iPhone/iPad/iPod. Only use the supplied cable or cables that are available as accessories to connect the projector. Cables available as accessories Component Video Cable YUV / YPbPr .............................................. (PPA1210 / 253447083) Video-(CVBS) cable ...................
Connecting to a Computer (VGA) Notice Many laptops do not activate the external video output automatically when you connect a second display such as a projector. Check your laptop's manual to find out how to activate the external video output. Connecting Using an Audio/ Video (CVBS) Adapter Cable Use the projector's audio/video adapter cable (A/V cable) (not included) to connect camcorders, DVD players or digital cameras.
Connecting using Component-Video (YPbPr/ YUV) Cable Please use this type of connection to obtain the highest possible image quality. This cable is available as an accessory. The device jacks have the colours green (Y), blue (U/Pb), red (V/Pr) for the video signal and red (audio right) and white (audio left) for the audio signal. Connecting to mobile multimedia devices Some video devices (e.g.: pocket multimedia players, ...) require specific connection cables.
Directly Connecting Projector to Computer using WLAN (WiFi Streaming) With the software PicoPixWlink you can connect the projector to a computer or a laptop over your wireless network. For this purpose, both devices must be connected to the same wireless network. 1 Install the PicoPixWlink software (allready pre installed on the projector) on your computer (see also Connect to a Computer (USB), page 20). 2 Connect the device with the wireless network (see also Wireless Network (WLAN), page 21).
5 Memory Inserting a Memory Card Connecting USB Storage Device V Y-PGA HDb-P MI r 1 Insert a memory card with the contacts facing upwards into the / slot at the back of the device. Your device supports the following memory cards: SD/SDHC/SDXC/MMC. 2 Insert the memory card into the slot until it snaps into position. 1 Connect the USB storage device to the USB port on the side of the device. DANGER! Prematurely remove a Memory Card! Never pull out the memory card while the device is accessing it.
Connect to a Computer (USB) 5 Confirm to enable the connection. You can use the USB cable to connect the Pocket Project to a computer. In this way, you are able to copy files back and forth between the internal memory, an inserted memory card and the computer. You can also delete the files. You can playback the files saved on the Pocket Projector on your computer. Notice V Y-PGA HDb-P MI r 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears.
6 Wireless Network (WLAN) In a wireless network (Wireless Local Area Network, WLAN) at least two computers, printers or other additional devices communicate with each other over radio waves (high frequency waves). Data transmission in the radio network is based on the standards 802.11b, 802.11g and 802.11n. DANGER! Information on Using WLAN! The functioning of security systems, medical equipment or sensitive devices can be disrupted by the transmission power of the device.
Setting up a Wireless Network (WLAN) Using the Wizard You can integrate your device very quickly and easily into an existing wireless network using Wi-Fi Protected Setup (WPS) or using a wireless network scan. Using WPS, all important settings like network name (SSID) are automatically configured and the connection protected with secure WPA Encryption. Using Wi-Fi Protected Set-up (WPS) Digital Living Network Alliance (DLNA) This device supports Digital Living Network Alliance (DLNA).
7 Media Playback 7 Use play. Notice / to select the video file that you wish to Navigation Keys All the keys shown are buttons on the remote control. Notice Best Settings for Optimal Use Read the informations on the best settings in the chapter settings (see also Settings, page 35) for optimal use of your device. Video playback Notice Displaying Video Files Only those videos that are compatible with the Pocket Projector will be displayed.
Please note that some files cannot be played as a result of different video and audio encoders. Supported file formats Container Video format *.avi, *.mov, *.mp4 MJPEG, MPEG-4, H.264 *.mkv MPEG-4, H.264 *.ts MPEG-2, H.264 *.m2ts H.264 *.3gp H.263 *.rm, *.rmvb Real video *.dat MPEG-1 *.vob MPEG-2 *.mpg, *.mpeg MPEG-1, MPEG-2 Video Playback (Mini-HDMI Socket) 1 Connect the audio/video output of the external device to the Pocket Projector's socket.
Notice Rotate the Image Using your thumb contact the touchpad and swipe with the forefinger in a circular manner to rotate an image (see also Touchpad / Gestures, page 8). 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 10 Press T to pause the slide show. 11 Press ¿ to end the slide show and return to the overview. 12 When you press ¿ again, you will return to the main menu. Slide Show with Background Sound 1 2 3 4 5 Start the slideshow.
Office Playback (YOZO Office) 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. You can display documents with YOZO Office. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Folder View. 4 Confirm with à. 5 With an inserted memory card or USB storage device: Select the internal memory, the USB storage device or the memory card using the keys / .
13 Use / to select the destination memory: SD card, internal memory or USB storage device. 14 Confirm with à. / 7 Use Notice No Files Found (0 files) Only those files that are compatible with the Projector will be displayed. Notice Files Already Exist If the files you are copying already exist in the target folder, you must choose whether or not you want to overwrite them using / and à. If you choose not to overwrite these files, copies will be created.
8 Digital TV Playback (Only for the country which support DVB-T) Notice Necessary Accessories To be able to use the DVB-T function of your projector, you either require the Pico Station PPA7301 (not supplied) or the USB DVB-T stick PPA8301 (not supplied). You can purchase the Pico Station docking station and th USB DVB-T stick according to the ordersheet.
First Playback Notice Navigation Keys All the keys shown are buttons on the remote control. When the DVB-T function is first started, the automatic channel search must be started. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. Scan Channels 14 Use the navigation keys to select Scan Channels. 15 Confirm with à. 16 Use the navigation keys to select OK. 17 Confirm with à. 18 Use the navigation keys to select Auto. 19 Confirm with à.
Television Notice Navigation Keys All the keys shown are buttons on the remote control. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Connect the aerial (see also Connecting the Aerial, page 28). 4 Use the navigation keys to select Digital TV. 5 Confirm with à. 6 The sub menu appears. 7 Use the navigation keys to select Video Broadcast. 8 Confirm with à. 9 The last viewed channel is played. Change the channel using z/{.
9 Android Your Pocket Projector uses the Android operating system. Installing Android-Apps CAUTION! Calling Android Trusted Sources! Apps from third party sources may be malicious. Only use installation packets from trusted sources. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. You can install other apps. Use the APK installation packets. Notice Compatibility The manufacturer does not guarantee the compatibility of third party apps.
Install Adobe Flash Player 12 Use the navigation keys to select Install. You need to install the latest version of the Adobe Flash Player in order to play Youtube videos. 1 Download the latest version of Adobe Flash Player installation package (flashplayer.apk) for Android. For further information visit www.philips.com/support. 2 Save the package onto a memory card. 3 Insert the memory card into the device (see also Inserting a Memory Card, page 19).
Adjust Browser Mode 10 Use the navigation keys to select Settings. Change the browser mode to display websites containing flash elements. 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 11 Confirm with à. 12 Use the navigation keys to select User agent. 3 Use the navigation keys to select Android. 4 Confirm with à. 5 Use the navigation keys to select Browser. 13 Confirm with à. 14 Use the navigation keys to select Desktop. 6 Confirm with à.
Reset Browser Mode 1 Proceed as described in the adjust browser mode chapter (see also Adjust Browser Mode, page 33). 2 Use the navigation keys to select iPad. 3 Confirm with à.
10 Settings 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Settings. 4 Confirm with à. 5 Use / to select from the following settings. Projection mode Front – Normal projection; the device is located in front of the projection surface/screen Rear – Rear projection; the device is located behind the projection surface; the image is reflected horizontally.
Picture settings View – Display the images as a thumbnail or as a list during selection in the main menu. Time per slide – Image viewing time during slide show Repeat – Set the type of repeat for slide show photos: Repeat off (Off), repeat all photos in the directory (Directory), repeat all stored photos (All).
11 Service Care Instructions for the Battery The capacity of the battery diminishes with time. You can prolong the life of the battery if you observe the following points: • Without a power supply, the device operates from the built-in battery. When the battery does not have sufficient capacity, the device turns off. Connect the device to the power supply. • When the battery does not have sufficient capacity, the battery symbol in the display and turns red.
Cleaning DANGER! Instructions for Cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning fluids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.
Troubleshooting 1 Switch the device off using the on/off switch on the side. 2 Wait at least ten seconds. 3 Switch the device on using the on/off switch on the side. 4 If the problem repeats, please contact our technical customer service or your retailer. Power Cycling If a problem occurs that cannot be corrected with the instructions in this user manual (see also the help below), follow the steps given here.
Problems Solutions Devices changes from maximum level of brightness to • minimum level of brightness when the device is connected over USB to play videos. • When the environment temperature is too high, the devices turns automatically from maximum level of brightness to minimum level of brightness in order to protect the high power LED. Use the device with lower environment temperatures.
12 Appendix Technical Data Accessories Dimensions (L¦×¦H¦×¦W).......................105¦×¦32¦×¦105¦mm Weight .....................................................0.626 lb (0.284¦kg) Recommended Ambient........................................5¦–¦35¦ºC Relative Humidity ..................15¦–¦85¦% (non-condensing) File format................... *.mp4, *.avi, *.mov, *.mkv, *.mpg, ..................................*.mpeg, *.flv, *.ts, *.m2ts, *.3gp Photo formats .................................
The CE marking certifies that the product meets the main requirements of the European Parliament and Council directives 1999/5/CE, 2006/95/CE, 2004/108/ CE and 2009/125/CE on information technology equipment, regarding safety and health of users and regarding electromagnetic interference. The declaration of compliance can be consulted on the site www.picopix.philips.com. Preservation of the environment as part of a sustainable development plan is an essential concern of Sagemcom Documents SAS.
Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste. Batteries: If your product contains batteries, they must be disposed of at an appropriate collection point. Trademarks: The mentioned references in this manual are trademarks of the respective companies.
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by Sagemcom Documents SAS under license from Koninklijke Philips N.V. È 201 Sagemcom Documents SAS All rights reserved Sagemcom Documents SAS Documents Business Unit Headquarters: CS 50001 92848 Rueil Cedex - FRANCE Tel: +33 (0)1 57 61 10 00 · Fax: +33 (0)1 57 61 10 01 www.sagemcom.
