PM435 Universal Remote
Table of Contents Introduction ...................................................... 3 Setup ............................................................... 4 Battery Installation ....................................... 4 Battery Saver ............................................... 4 Code Saver ................................................. 4 Power-On default ........................................ 5 TV Punch Through ....................................... 5 VCR Punch Through .........................
Setup Battery Installation Power-On Default 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. The remote powers on in TV mode.
Button Functions, cont. Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. Prev. Ch. may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must be equipped with Prev. Ch. ability for the Prev. Ch. button to operate this feature.
Advanced Button Functions DVD TV/VCR Punch-Through Scan+ and Scan- buttons control the speed of Fast Forward and Reverse Playback respectively. Chapter+ and Chapter- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. Subtitle button brings up DVD Subtitle Menu for Subtitle selection and display. Repeat button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.
Code Entry Direct Code Entry Programming with Code Search 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL Up.
Sleep Timer Code Identification Code Identification 1. Press and hold Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Press and release the Code Search button. The indicator light blinks off. 4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn.
EMERSON ......... 002 003 004 ..... 005 104 105 106 115 204 ..... 205 206 213 304 305 316 ..... 319 405 502 505 506 519 ..... 604 605 705 804 805 903 ............................. 904 905 906 ENVISION .................. 002 502 FISHER 506 522 606 619 902 FUJITSU ..................... 206 321 FUNAI ................ 206 805 906 FUTURETEC ............ 805 906 GE ........ 002 006 007 018 107 ..... 114 310 312 502 601 704 ..... 719 803 806 810 901 911 GIBRALTER .............. 002 713 GOLDSTAR 002 102 117 207 ...
KENWOOD ............... 025 235 ............................. 428 436 725 KLH ............................ 230 237 KODAK .............. 130 226 525 LLOYD ....................... 324 726 LOGIK ............................... 230 LXI ..................................... 525 MAGNAVOX ..... 130 226 330 ..................... 534 536 635 734 MAGNIN ........................... 425 MARANTZ ........ 025 130 226 ..... 330 428 436 530 535 725 MARTA ............................. 525 MATSUSHITA ...........
Product Operation Troubleshooting After the batteries are installed and you have programmed the remote for the codes that operate your products, you can use your remote to operate a TV, VCR, DVD, Satellite System, etc. Remote does not operate your product. • • • • Press the mode button of the product you want to control. Program the remote with a new code. Install new batteries. (You might have to reprogram your remote after installing new batteries.) Remote may not be compatible with your product.
90 Day Warranty This product is manufactured to PHILIPS MAGNAVOX specifications and is free from defects in material, workmanship and assembly. This warranty extends only to the original purchaser and is nontransferable. Should a defect occur under normal operating conditions within 90 days from the date of purchase, PHILIPS MAGNAVOX will provide a comparable replacement free of charge within the warranty period, to the original purchaser.
