PM335 Universal Remote Insructions
Table of Contents Introduction ...................................................... 3 Setup ............................................................... 4 Battery Installation ....................................... 4 Battery Saver ............................................... 4 Code Saver ................................................. 4 Power-On default ........................................ 5 TV Punch Through ....................................... 5 DVD/VCR Punch Through .....................
Setup Battery Installation Power-On Default 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. The remote powers on in TV mode.
Button Functions Button Functions, cont. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. Prev. Ch. may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must be equipped with Prev. Ch. ability for the Prev. Ch. button to operate this feature.
Advanced Button Functions DVD TV/DVD Punch-Through Scan+ and Scan- buttons control the speed of Fast Forward and Reverse Playback respectively. Chapter+ and Chapter- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. Subtitle button brings up DVD Subtitle Menu for Subtitle selection and display. Repeat button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.
Code Entry Direct Code Entry Programming with Code Search 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, DVD, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL Up.
Sleep Timer Code Identification Code Identification 1. Press and hold Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, DVD, etc.). The red indicator blinks, then stays lit. 3. Press and release the Code Search button. The indicator light blinks off. 4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn.
Code List TV ABEX ................................. 120 ADMIRAL ................. 701 918 ADVENTURA .................. 019 AIKO ................................. 407 ALLERON ........................ 206 AMARK ............................. 603 AMTRON .......................... 906 AKAI ................................. 801 AMSTRAD ........................ 520 ANAM NATIONAL . 104 805 ............................. 901 906 920 AOC ............ 002 003 102 119 ..................... 217 302 502 814 ARCHER .......
CYBERNEX ...................... 425 DAEWOO .. 026 135 625 626 ..................... 726 825 826 926 DAYTRON ........................ 135 DBX .......................... 025 436 DIMENSIA ........................ 124 DYNATECH .............. 324 726 ELECTROHOME ..... 027 525 ELECTROPHONIC ......... 525 EMERSON . 027 028 127 128 ............. 130 226 227 228 324 ............. 325 327 427 428 525 ............. 526 527 528 625 626 ............. 627 628 630 634 724 ..... 726 727 735 827 828 927 FISHER .......
Product Operation Troubleshooting After the batteries are installed and you have programmed the remote for the codes that operate your products, you can use your remote to operate a TV, DVD/VCR, or Satellite System, etc. Remote does not operate your product. • • • • Press the mode button of the product you want to control. Program the remote with a new code. Install new batteries. (You might have to reprogram your remote after installing new batteries.) Remote may not be compatible with your product.
90 Day Warranty This product is manufactured to PHILIPS MAGNAVOX specifications and is free from defects in material, workmanship and assembly. This warranty extends only to the original purchaser and is nontransferable. Should a defect occur under normal operating conditions within 90 days from the date of purchase, PHILIPS MAGNAVOX will provide a comparable replacement free of charge within the warranty period, to the original purchaser.
