Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your micro system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Prepare the remote control Turn on Set clock 2 2 4 4 4 5 6 9 9 9 10 10 10 11 5 Listen to radio 12 12 12 13 13 6 Other features 14 14 14 14 14 Tune to FM radio stations Program radio stations automatically Program radio stations manually Show RDS information Set alarm timer Set sleep timer Listen to external audio devi
1 Important Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Never look into the laser beam inside this apparatus. •• Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the apparatus from the power.
2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB storage devices, tapes, and other external devices; • listen to radio stations.
Overview of the main unit i j a k b l m c d n e f g h a • • Turn on the main unit Switch to standby mode e b SOURCE • Select a source. c d • • STOP Stop play or erase a program. PLAY/PAUSE Start or pause play. f / PREVIOUS/NEXT Skip to the previous/next track. Fast reverse or fast forward within a track or disc. • Tune to a radio station. • Adjust time. • • • Connect to USB storage device. g MP3-LINK • Connect to an external audio device.
h i • Connect to a headphone. • Open/close the disc compartment. j Display panel • Show current status. k MODE • Select repeat play mode in CD, or USB source. • Select shuffle play mode in CD, or USB source. l CLOCK • Set clock. m ALBUM/PRESET+/• Select a preset radio station. • Skip to the previous/next album. n VOLUME(Volume knob) • Adjust volume.
g ALB/PRESET -/+ • Skip to the previous/next album. • Select a preset radio station. h MUTE • Mute volume. i DSC • Select a preset sound setting: POP, JAZZ, ROCK, or CLASSIC. j TIMER • Set the alarm timer. k • • Turn on the main unit. Switch to standby mode. l DIMMER • Access illuminate dimmer settings. m SLEEP • Set the sleep timer. n SHUFFLE • Play tracks randomly. o • Start or pause play.
3 Release the socket flap. Prepare the remote control Caution •• Risk of explosion! Keep batteries away from heat, a b c sunshine or fire. Never discard batteries in fire. •• Risk of decreased battery life! Never mix different brands or types of batteries. •• Risk of product damage! When the remote control is not used for long periods, remove the batteries. •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Note •• When the unit remains idle for 15 minutes, it switches from standby mode automatically. 2 3 4 In standby mode, press and hold CLOCK on the remote control for more than two seconds. »» [24H] or [12H] hour format is displayed. Press / format. Basic play operations You can control play through following operations. Set clock 1 4 Play to select [24H] or [12H] hour Key Function / DISPLAY REPEAT press CLOCK to confirm. »» The hour digits are displayed and begin to blink.
Adjust sound During play, you can adjust volume through following operations. Tip •• If your main unit does not start to play, press to select a track and then press . / Key Function VOL +/MUTE DBB To increase/decrease the volume. Play from USB DSC Note •• Make sure that the USB storage device contains playable audio contents for supported formats. 1 2 3 4 5 Insert a USB storage device into the socket on the main unit. Press USB to select the USB source. »» The total number of tracks displays.
4 5 6 Press / to select a track number, then press PROG to confirm. Repeat steps 3 and 4 to program more tracks. Press to play the programmed tracks. »» During play, [PROG] (program) is displayed. »» To erase the program, press play is stopped. when Listen to tape Note •• When you play or record a tape, the sound source cannot be changed. •• To record, use only "Normal" (IEC type I) tapes on which the write-protect notches (tabs) are not broken.
5 6 Load a tape with the open side downward and the full spool to the left, and close the tape door. 5 Listen to radio Press to start recording. »» Disc play starts automatically from the beginning of the disc or the selected section. Tune to FM radio stations • • To pause or resume recording, press . To stop recording, press . Record from radio to tape 1 2 3 4 5 Tune to a radio station. Pull to open the tape button cover. Press to open the tape door.
Program radio stations manually Note •• You can program a maximum of 20 preset radio stations. 1 2 3 4 Tune to a radio station. Press PROG to activate programming mode. Press ALB/PRESET+/- to select a number from 1 to 20 for this radio station, then press PROG to confirm. »» The preset number and the frequency of the preset station are displayed. Synchronize clock with RDS You can synchronize time shown on the unit with that on the RDS station.
6 Other features Set alarm timer This unit can be used as an alarm clock. You can select DISC, USB, or FM TUNER as alarm source. Note •• Make sure that you have set the time correctly. 1 2 3 4 5 In standby mode, press and hold TIMER until [TIMER SET](timer set) scrolls on the display. »» [SELECT SOURCE] (select source) scrolls on the screen. When the unit is turned on, press SLEEP repeatedly to select a time period (in minutes). »» When sleep timer is activated, is displayed.
7 Product information Note •• Product information is subject to change without prior notice. Tuning Grid Sensitivity -M ono, 26 dB S/N Ratio Search selectivity Total harmonic distortion Signal to noise ratio 50 KHz < 22 dBf < 36 dBu <3% > 45 dB General information Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input 2 x 5 W RMS 60 Hz - 16 kHz, ±3 dB >65 dB 0.5 V RMS 20 kohm Speakers Speaker Impedance Speaker Driver Sensitivity 4 ohm 3.
•• File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported formats: •• Empty albums: an empty album is an album that does not contain MP3/WMA files. •• Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. •• AAC, WAV, PCM audio files •• DRM protected WMA files (*.wav, *.m4a, *.m4p, *.mp4, *.
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
9 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. MCM1120_61_UM_V2.
