Specifications

Mechanical Instructions
EN 9Q552.2L LA 4.
2011-Apr-22
back to
div. table
4. Mechanical Instructions
Index of this chapter: 4.1 Cable Dressing Blockbuster Styling (xxPFL66xx/xx series) 4.2 Service Positions 4.3 Assy/Panel Removal Blockbuster Styling (xxPFL66xx/xx series) 4.4 Set Re-assembly Notes: • Figures below can deviate slightly from the actual situation,
due to the different set executions.
4.1 Cable Dressing Blockbuster Styling (xxPFL66xx/xx series)
Figure 4-1 Cable dressing 40PFL6606x/xx (Blockbuster) - picture taken from an European set
4.2 Service Positions
For easy servicing of a TV set, the set should be put face down on a soft flat surface, foam buffers or other specific workshop tools. Ensure that a stable situation is created to perform measurements and alignments. When using foam bars take care that these always support the cabinet and never only the display. Caution: Failure to follow these guidelines can
seriously damage the display! Ensure that ESD safe measures are taken.
4.3 Assy/Panel Removal Blockbuster Styling
(xxPFL66xx/xx series)
For the 40" and 46" Blockbuster sets, additional instructions (rear cover removal) apply. Refer to subsection Additional instructions for Blockbuster 40-/46PFL6606x/xx.
The instructions apply to the 37PFL6606H/12 (European model).
4.3.1 Rear Cover
Warning: Disconnect the mains power cord before you remove the rear cover. Note: it is not necessary to remove the stand while removing
the rear cover.
19100_046_110214.eps
110214