Specifications

Alignments
EN 37Q552.2L LA 6.
2011-Apr-22
back to
div. table
Note 1). Example
6.5 Reset of Repaired SSB
A very important issue towards a repaired SSB from a Service repair shop (SSB repair on component level) implies the reset of the NVM on the SSB. A repaired SSB in Service should get the service Set type “00PF0000000000” and Production code “00000000000000”. Also the virgin bit is to be set. To set all this, you can use the ComPair tool or use the “NVM editor” and “Dealer options” items in SAM (do not forget to “store”). After a repaired SSB has been mounted in the set (set repair on board level), the type number (CTN) and production code of the TV has to be set according to the type plate of the set. For this, you can use the NVM editor in SAM. This action also
ensures the correct functioning of the “Net TV” feature and access to the Net TV portals. The loading of the CTN and production code can also be done via ComPair (Model number programming). After a SSB repair, the original channel map can be restored, provided that the original channel map was stored on a USB stick before repair was commenced and that basic functionality of the TV, needed for this procedure, was not hampered as a result of the defect. The procedure of “channel map cloning” is clearly described in the (electronic) user manual. In case of a display replacement, reset the “Operation hours display” to “0”, or to the operation hours of the replacement display.
Bit 0 (LSB) 1 DVBT light
1
1)
0 = OFF 1 = ON (when DVBT Installation is OFF or Country depend to a country is OFF, this option is used)
Option 7 (prescribed value 33024
1)
)
Bit 15 (MSB) 32768 Visual Identity
1
1)
0 = User Interface 2k10 1 = User Interface 2k11
Bit 14 16384 Red LED Config LUT
000
1)
000 = LED config LUT 0 001 = LED config LUT 1 010 = LED config LUT 2 011 = LED config LUT 3 100 = LED config LUT 4 101 = LED config LUT 5 110 = LED config LUT 6 111 = LED config LUT 7
Bit 13 8192 Bit 12 4096 Bit 11 2048 Board Identifier
00
1)
not used, should always be “00”
Bit 10 1024 Bit 9 512 Manet
0
1)
0 = all sets except Manet 1= Manet
Bit 8 256 Auto Power Down
1
1)
0 = OFF 1 = ON
Bit 7 128 Light Guide
0
1)
0 = OFF 1 = ON
Bit 6 64 E-box
0
1)
0 = integrated set 1 = e-box/monitor
Bit 5 32 Temp LUT
000
1)
000 = temp lut 0 001 = temp lut 1 010 = temp lut 2 011 = temp lut 3 100 = future use 101 = future use 110 = future use 111 = future use
Bit 4 16 Bit 3 8 Bit 2 4 Temp Sensor
00
1)
00 = no temp sensor 01 = temp sensor in display 10 = temp sensor on additional board 11 = temp sensor in AL module
Bit 1 2 Bit 0 (LSB) 1 FAN
0
1)
0 = no fan 1 = fan(s) present)
Option 8 (prescribed value 00012
1)
)
Bit 15 (MSB) 32768 Test 8
0
1)
-
Bit 14 16384 Test 7
0
1)
-
Bit 13 8192 Test 6
0
1)
-
Bit 12 4096 Test 5
0
1)
-
Bit 11 2048 Test 4 (Trick Mode)
0
1)
0 = OFF 1 = ON
Bit 10 1024 Test 3 (XRay)
0
1)
0 = OFF 1 = ON
Bit 9 512 Test 2 (DBV-T light)
0
1)
0 = OFF 1 = ON
Bit 8 256 Test 1 (Monitor out)
0
1)
0 = OFF 1 = ON
Bit 7 128 not used
0000
1)
-
Bit 6 64 Bit 5 32 Bit 4 16 Bit 3 8 WM DRM10
1
1)
0 = OFF 1 = ON
Bit 2 4 HBBTV
1
1)
0 = OFF 1 = ON
Bit 1 2 DVB-T2 Installation
0
1)
0 = OFF 1 = ON
Bit 0 (LSB) 1 DVB-T2
0
1)
0 = OFF 1 = ON
Option & Bit Dec. Value Option Name
Prescribed Value
1)
Description