Specifications

Alignments
EN 34 Q552.2L LA6.
2011-Apr-22
back to
div. table
If you do not have a color analyzer, you can use the default values. This is the next best solution. The default values are average values coming from production. • Select a COLOUR TEMPERATURE (e.g. COOL,
NORMAL, or WARM).
• Set the RED, GREEN and BLUE default values according
to the values in Table 6-3
.
• When finished press OK on the RC, then press STORE (in
the SAM root menu) to store the aligned values to the NVM.
• Restore the initial picture settings after the alignments. Table 6-3 White tone default setting 40" (Blockbuster)
6.4 Option Settings 6.4.1 Introduction
The microprocessor communicates with a large number of I
2
C
ICs in the set. To ensure good communication and to make digital diagnosis possible, the microprocessor has to know which ICs to address. The presence / absence of these PNX51XX ICs (back-end advanced video picture improvement IC which offers motion estimation and compensation features (commercially called HDNM) plus integrated Ambilight control) is made known by the option codes. Notes: • After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left, select STORE in the SAM root menu and press OK on the RC.
• The new option setting is only active after the TV is
switched “off” / “stand-by” and “on” again with the mains switch (the NVM is then read again).
6.4.2 Dealer Options
For dealer options, in SAM select “Dealer options”. See Table 6-5 SAM mode overview
.
6.4.3 (Service) Options
From 2011 onwards, it is not longer possible to change individual option settings in SAM. Options can only be changed all at once by using the option codes as described in section 6.4.4
.
6.4.4 Opt. No. (Option numbers)
Select this sub menu to set all options at once (expressed in two long strings of numbers). An option number (or “option byte”) represents a number of different options. When you change these numbers directly, you can set all options very quickly. All options are controlled via eight option numbers. When the NVM is replaced, all options will require resetting. To be certain that the factory settings are reproduced exactly, you must set both option number lines. You can find the correct option numbers on a sticker inside the TV set. Example: The options sticker gives the following option numbers: • 08192 00133 01387 45160 • 12232 04256 00164 00000 The first line (group 1) indicates hardware options 1 to 4, the second line (group 2) indicate software options 5 to 8. Every 5-digit number represents 16 bits (so the maximum value will be 65536 if all options are set). When all the correct options are set, the sum of the decimal values of each Option Byte (OB) will give the option number. Diversity Not all sets with the same Commercial Type Number (CTN) necessarily have the same option code! Use of Alternative BOM => an alternative BOM number usually indicates the use of an alternative display or power supply. This results in another display code thus in another Option code. Refer to Chapter 2. Technical Specifications, Diversity, and
Connections.
6.4.5 Option Code Overview
Refer to the sticker in the set for the correct option codes. Important: after having edited the option numbers as described above, you must press OK on the remote control
before the cursor is moved to the left!
6.4.6 Option Bit Overview
For test purposes, please find below an overview of the Option Codes on bit level. With a bin/dec converter, you can calculate the Option Code. Caution When manipulating option codes, know what you’re doing. Wrong option codes could damage the set. Prescribed option codes below are an example, not valid for all
sets and are subject to modification.
The correct option codes are always present on a sticker inside the set!
Table 6-4 Option codes at bit level (Option 1 - Option 8)
White Tone e.g. 40PFL6606x Colour Temp R G B Normal t.b.d. t.b.d. t.b.d. Cool t.b.d. t.b.d. t.b.d. Warm t.b.d. t.b.d. t.b.d. Option & Bit Dec. Value Option Name
Prescribed Value
1)
Description
Option 1 (prescribed value 32776
1)
)
Bit 15 (MSB) 32768 Video Store Streaming
1
1)
0 = OFF 1 = ON
Bit 14 16384 Multi App
00
1)
00 = none 01 = multi app (Multiview BASIC) 10 = AVPIP + multi app (Multiview ENHANCED) 11 = future use
Bit 13 8192 Bit 12 4096 Perfect Pixel
00
1)
00 = Pixel Plus HD 01 = Pixel Precise HD 10 = Perfect Pixel HD 11 = future use
Bit 11 2048 Bit 10 1024 Tuner Type
000
1)
000 = TH2603 (Europe/AP) 001 = FA2307 (Brazil) 010 = VA1E1ED2411 011 = future use 100 = future use 101 = future use 110 = future use 111 = future use
Bit 9 512 Bit 8 256