Specifications
Mechanical Instructions
EN 11Q552.2L LA 4.
2011-Apr-22
back to
div. table
Figure 4-6 SSB
1. Unplug all connectors [1].
2. Remove the fixation screws [2].
3. Take the board out.
When remounting, ensure that the side shielding is positioned
correctly.
4.3.6 Keyboard Control, IR & LED Board
Refer to Figure 4-7
and Figure 4-8 for details.
Figure 4-7 Keyboard control, IR & LED board [1/2]
Figure 4-8 Keyboard control, IR & LED board [2/2]
1. Remove the stand [1].
2. Remove the stand subframe [2].
3. Remove the screws [3], unplug the connector and take the
board out.
When defective, replace the whole unit.
4.3.7 LCD Panel
Refer to Figure 4-9
to Figure 4-11 for details.
1. Remove the SSB as described earlier.
2. Remove the PSU as described earlier.
3. Remove the tweeters with their subframes and subwoofer
as described earlier.
4. Remove the stand and -subframe as described earlier.
5. Remove the cables [1].
6. Remove the mains switch subframe [2].
7. Remove the keyboard control-, and IR & LED board as
described earlier.
8. Remove all remaining cables and subframes.
9. Use a screwdriver to release the catches [3] that secure the
panel.
10. Use a screwdriver to release the catches and remove the
sidewings [4] that secure the panel.
11. Take the panel out.
Remove the clamps from the panel before sending the panel in
for Service.
19101_007_110407.eps
110407
2
2
2
2
2
2
1
19101_009_110407.eps
110407
1
1
1
1
19101_006_110407.eps
110407
2
2
2 2
2
2
3 3