Portable DVD player Register your product and get support at www.philips.
1 1 2 3 4 5 6 7 9 8 10 14 15 16 11 12 13 18 17
2 1 11 2 3 12 4 13 5 6 14 7 8 15 9 10 16
English Content 1 1.1 1.2 2 2.1 2.2 2.3 2.4 Control elements and functional components Main unit controls Remote Control Introduction Your portable DVD player Unpacking Placement Playable disc formats 2.5 Zero Bright DotTM 3 4 4.1 4.2 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 General information Charging the units Charge the DVD player Powering your remote control Start up Setup Playback DVD Playback VCD Playback Super (S)-VCD Playback Music CD Playback Music MP3/WMA-CD Playback Picture-CD 5.
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 1.1 Main unit controls (see figure 1) 1 POWER 2 9 Switch the player on / off Press once to stop playback and store the stop position. Press twice to stop playback completely.
VOL+ / 3 DISPLAY 4 J( 5 2; 6 9 7 0-9 8 SUBTITLE 9 RETURN 10 A - B 11 SETUP 12 OPTION 13 )K 14 s 15 AUDIO 16 ZOOM Volume control Adjust the display value of the system Skip to previous chapter, track or title Start / pause / resume playback Press twice to stop playback Numeric keypad Subtitle language selector For VCD menu page To repeat or loop a sequence in a title Enter SETUP menu Access additional functions Skip to next chapter, track or title Mute player volume Audio language selector Enlarge video ima
2 Introduction 2.1 Your portable DVD player Your portable DVD player plays digital video discs conforming to the universal DVD Video standard.With it, you will be able to enjoy full-length movies with true cinema picture quality, and stereo or multichannel sound (depending on the disc and on your playback set-up). The unique features of DVD-Video, such as selection of soundtrack and subtitle languages, and of different camera angles (again depending on the disc), are all included.
2.4 Playable disc formats In addition to DVD-Video disc, you will also be able to play all Video CDs, CDs, CDR, CDRW,DVD±R and DVR±RW. 2.4.1 DVD-Video Depending on the material on the disc (a movie, video clips, a drama series, etc.) these discs may have one or more Titles, and each Title may have one or more Chapters.To make access easy and convenient, your player lets you move between Titles, and also between Chapters. 2.4.
you can create your own using your personal content and easy-touse tools from DivX.com. Offical DivX® Certified product. Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files. 2.4.6 About SD Memory Card SD Memory Card is a slim and compact bridge media linking various kinds of digital equipment through its easy connectivity.The card's control circuitry allows data to be read and written (in its protection area) only when appropriate external devices are detected.
3 General information Power Sources This unit operates on a supplied AC adaptor, car adapter, or a rechargeable battery pack. • Make sure that the input voltage of the AC adaptor is in line with the local voltage. Otherwise, the AC adaptor and unit may be damaged. • Do not touch the AC adaptor with wet hands to prevent electric shock. • When connecting with car power (cigarette lighter) adaptor, be sure the input voltage of the adaptor is identical with car voltage.
• Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the appartus (e.g. liquid filled objects,lighted candles) • Do not touch the lens! Hearing Safety Listen at a moderate volume. • Using headphones at a high volume can impair your hearing.This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute.
• Do not turn up the volume so high that you can’t hear what’s around you. • You should use caution or temporarily discontinue use in potentially hazardous situations. • Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.
Handling discs • Do not attach paper or tape to the disc. • Keep the disc away from direct sunlight or heat sources. • Store the disc in a disc case after playback. • To clean, wipe the disc outwards from the center with a soft, lint-free clean cloth. On handling the LCD screen The LCD is manufactured using high precision technology.You may, however, see tiny black points that continuously appear on the LCD.This is a normal result of the manufacturing process and does not indicate a malfunction.
4 Charging the units 4.1 Charge the DVD player Plug in the AC/DC adaptor • The RED LED indicates that charging is in progress. • When the set is not in use, it will take about 4 hours to fully charge it. The RED LED will turn off when the set is fully charged. Tips: * You can operate the DVD player while charging. However, it takes longer time to fully charge the battery. * When the low battery icon appears on the screen, please charge the player.
CAUTION • Batteries contain chemical substances, so they should be disposed of properly. • Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst. • Remove the batteries if the set is not to be used for a long time.
5 Start up 5.1 Setup 1 Press SETUP. A list of features is shown. 2 Use 3 / 4 to highlight your selection. 3 Use 2 to enter a sub-menu 4 Use 3, 4, 1, 2 to highlight your desired setting and press OK to confirm. The SETUP menu includes: General Language Set On Screen Display (OSD) languages PBC settings Set Playback Control function ON/OFF.This feature is available for Super VCD.
Audio Dolby Set Dolby output Digital (SPDIF) Set digital output format 5.2 Playback DVD 1 Briefly press POWER on the main control of the player to switch on the set. 2 Open the disc door and insert the disc. • The player will start to play the disc automatically. 3 Use 1, 2, 3, 4 to select an item from the DVD disc menu, such as play now, select languages and subtitle, and press OK to confirm. The following functions are available during playback: Press 2; to pause playback.
Angle Zoom A-B Repeat pressing either the AUDIO or OPTIONS key Change the viewing angle provided in the DVD disc.The function is available by pressing the OPTIONS key. Zoom in the screen, and then use the navigation keys to pan the screen.The function is available by pressing either the ZOOM or OPTIONS key Set repeat loop playback. Press A-B to set the starting point and press A-B again to set the ending point.Then, the player will repeat the loop playback. Press A-B to cancel the loop playback 5.
Language Zoom A-B Repeat Some VCDs only contain 2 languages for selection.You can change the language using this function.The function is available by pressing either the AUDIO or OPTIONS key Zoom in the screen, and then use the navigation keys to pan the screen.The function is available by pressing either the ZOOM or OPTIONS key Set repeat loop playback. Press A-B to set the starting point and press A-B again to set the ending point. Then, the player will repeat the loop playback.
The following functions are available during playback: Pause Press 2; to pause playback.You can resume playback by pressing 2; again Previous/Next Briefly press J( or )K once or several times to select your desired track Fast backward / Fast forward Keep pressing J( or )K to initiate backward/forward when 2x is shown on screen, press J( or )K briefly to change speed to 4x, 8x, 16x, 32x or resume normal playback.You may also press 2; to resume normal playback.
The following functions are available during playback: Pause Press 2; to pause playback.You can resume playback by pressing 2; again Previous/Next Briefly press J( or )K once or several times to select your desired track Fast backward / Fast forward Keep pressing J( or )K to initiate backward/forward when 2x is shown on screen, press J( or )K briefly to change speed to 4x, 8x, 16x, 32x or resume normal playback.You may also press 2; to resume normal playback.
• The set will start to play the disc automatically. 3 Use 1, 2, 3, 4 to select the folder and JPEG file to be played. Press 2; to pause playback.You can resume playback by pressing 2; again Previous/Next Briefly press J( or )K once or several times to select your desired track Rotate Press OPTIONS key to select rotate mode. Then, use 1 to rotate the picture clockwise. Use 2 to rotate the picture anti-clockwise. Press OPTIONS key to exit rotate mode.
2 Insert an SD/MMC memory card into the SD/MMC card slot. • The player will browse and show the contents of the SD/MMC card automatically. 3 Use 3, 4, 1, 2 to select the file you want to access, then press OK to play it. 4 At the end of the playback, take out the SD/MMC memory card from the DVD player. • Transferring and recording of data from the DVD player to the SD/MMC card is not possible. • The DVD player does not support SDHC (high capacity SD memory card).
6 Addition Functions 6.1 DISPLAY Menu When you press DISPLAY during playback, the following menu will appear and you can access the corresponding function and information: Brightness It allows you to adjust the brightness of the screen Contrast It allows you to adjust the contrast of the screen Color It allows you to adjust the color of the screen from cool, warm and normal. Turn off LCD You can turn off the screen in some situations, such as when connected to TV or playing music discs.
6.2.2 TV You can connect the player to a TV and enjoy your DVD. White Red Yellow 6.2.3 Component Video(YPbPr/YCbCr) Component Video connection provides higher picture quality.This option must be available on your TV. White Red Yellow Pr/Cr Pb/Cb Y White Red 1 Press OPTION. 2 Press 3 or 4 to select SOURCE, then press 2 to enter its sub-menu. 3 Press 3 or 4 to select YPbPr or YCbCr according to your TV setting. 4 Press OK to confirm. To exit the component video mode, press and hold RETURN.
6.2.4 SD/MMC card slot You can play video/audio/picture files stored in an SD/MMC card by inserting it into the SD/MMC CARD slot. TIP Make sure the metal contact of the card to be inserted is facing down. 6.2.5 Coaxial It provides digital audio output signal that you can connect to your home theater equipment to decode the digital audio signal.
7 Troubleshooting If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. If a fault occurs, first check the points listed, before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre.
Symptom Disc can’t be played Remedy • Ensure the disc label is upwards. • Clean the disc. • Check if the disc is defective by trying another disc. The player does not Aim the remote control directly at the respond to the remote sensor on the front of the player. Avoid all control obstacles that may interfere with the signal path. Inspect or replace the batteries. Distorted or B/W Use only discs formatted according to the picture with DVD TV-set used (PAL/NTSC).
8 Technical data Dimensions 20.4 x 16.8 x 3.3 cm 8.0 x 6.6 x 1.3 inches Weight 1.0 kg / 2.19 lb Power supply DC 12V 1.0A Power Consumption ≤20W Operating temperature range 0 - 50°C (32 - 122°F) Laser wavelength 650nm Video system NTSC / PAL / AUTO PHILIPS reserves the right to make design and specification changes for product improvement without prior notice. Modifications not authorized by the manufacturer may void users authority to operate this device. All rights reserved.
