Portable DVD player User manual PET1030
1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 2 1 11 2 3 12 4 13 5 6 14 7 8 15 9 10 16
English Content 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.1 2.2 2.3 2.4 Control elements and functional components Main unit controls Disc door Front of player Bottom of the player Right of player Remote Control Introduction Your portable DVD player Unpacking Placement Playable disc formats 2.4.1 2.4.2 2.4.3 2.4.4 2.4.5 2.4.6 DVD-Video Video CD Audio CD / MP3 CD / WMA CD CD with JPEG files DivX video discs About SD Memory Card 2.5 Zero Bright DotTM 2.
2.4 Playable disc formats Safety and maintenance In addition to DVD-Video disc, you will also be able to play all Video CDs, CDs, CDR, CDRW,DVD±R and DVR±RW. • Do not disassemble the unit for laser rays are dangerous to eyes. Any service should be done by qualified service personnel. • Unplug the AC adaptor to cut the power if liquid or objects get inside the unit. • Take care not to drop the unit or subject it to strong shocks, which may cause malfunction. 2.4.
4.2 Powering your remote control 1 Open the battery compartment. Remove the protective plastic tab (first time users only). 2 Insert 1 x lithium 3V battery, type CR2025, then close the compartment. CAUTION • Batteries contain chemical substances, so they should be disposed of properly. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
4 Use navigation keys to select the folder and JPEG file to be played. 6.2.3 AV input You can connect to other devices such as Digital Video Recorder, Digital Camera, etc. White Red Yellow 5 The following functions are available during playback: Pause Press 2; to pause playback. You can resume playback by pressing 2; again Previous/Next Briefly press J( or )K once or several times to select your desired track Rotate Press OPTIONS key to select rotate mode. Then, use 1 to rotate the picture clockwise.
Symptom Distorted or B/W picture with DVD No audio at digital output Player does not respond to all operating commands during playback Cannot detect USB plug-in Remedy Use only discs formatted according to the TV-set used (PAL/NTSC). • Check the digital connections. • Operations are not permitted by the disc. • Refer to the instructions in the disc inlay. • Unplug the USB connection and plug-in again. Detection may take some time that vary with the capacity of your USB device.
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners 2008 © Koninklijke Philips Electronics N.V. All rights reserved.
