operation manual

25
26
- do not expose the appliance to temperatures
higher than 35°C.
- remove the battery if you are not going to use
the appliance for a month or more.
- do not leave an empty battery in the appliance.
Using the appliance
You can use the trimming head to trim your nose
hair and ear hair. If you put one of the eyebrow
combs onto the trimming head, you can also use it
to trim your eyebrows and neck hair.
Trimming nose hair
Make sure your nostrils are clean.
1 To switch on the appliance, turn the battery
compartment cover from the ‘off’ position (0)
to the ‘on’ position (I) (Fig. 7) .
2 Carefully insert the trimming head into one
of your nostrils.
Do not insert the trimming head more than
0.5cm into your nostrils.
ENGLISH
3 Slowly move the trimming head around
to remove all unwanted hairs in your
nostrils. (Fig. 8)
4 To switch off the appliance, turn the battery
compartment cover to the ‘off’ indication
(0) (Fig. 9) .
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
1 To switch on the appliance, turn the battery
compartment cover from the ‘off’ position (0)
to the ‘on’ position (I) (Fig. 7) .
2 Slowly move the trimming head along the
rim of the ear to remove hairs that stick out
beyond the rim.
3 Insert the trimming head into the outer ear
channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could damage
the eardrum.
ENGLISH
NT5175-16A7JPcs6.indd26 14/12/0814:06