User manual

Change settings 17
values on brightness, contrast, saturation
and sharpness.
• Color Temperature: Set to Warm to
enhance hotter colors such as red; set to
Cool to make picture bluish; set to User to
customize color values in RGB mode.
• Geometry Corrections: Select an option to
correct keystone or distorted images to be
rectangular or square.
• Auto: Enable or disable auto correction
of the image shape.
• Manual: Manually correct keystone or
distorted images in the horizontal and
vertical orientation.
• Off: Disable correction of the image
shape.
• Projection Direction: Adjust the projection
to the correct position based on different
installation of the projector.
• Digital Zoom: Scale down the projection
image.
Sound options
You can access the following sound setting
options.
• Volume: Adjust volume of the projector.
• Sound Preset: Select a preset sound effect
or select User to manually adjust bass and
treble.
• Audio Output: Switch the audio output
between Internal Speaker and ARC/Optical.
Select ARC/Optical if you want to output
audio through HDMI or SPDIF connection
to a digital device (e.g. home cinema
system or AV receiver).
Scheduled shutdown
Go to Sleep Timer to select a time option which
enables the projector to automatically turn off
at a specified period of time.
Other options
You can also access the following options.
• Language: Select a language for on-screen
menus.
• Software Version: Check software version of
this product.
• Hardware Version: Check hardware version
of this product.
• Firmware Upgrade: Software update via a
USB device (see Update SW through USB,
page 18).
• Factory Reset: Restore default settings.