NeoPix Ultra One User Manual Home Projector Register your product and get support at www.philips.
Table of contents Introduction �������������������������������������������������3 4 Connect to playback devices ������������ 9 Dear customer ���������������������������������������������������������������3 Connect to devices through HDMI ������������������������ 9 About this user manual ����������������������������������������������3 Connect to devices through AV �����������������������������10 What’s in the box ����������������������������������������������������������3 Connect to a computer through
Introduction What’s in the box Dear customer b Lens cover Thank you for purchasing this projector. d AC adapter We hope you enjoy this product and the many functions it offers! a NeoPix Ultra One projector (NPX641/INT) c Remote control with 2 AAA batteries e Quick Start Guide f AC power cable with plug x 4 About this user manual The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. Setting up the product This product is for indoor use only. Place the product securely on a stable, flat surface.
Power supply Use only a power adapter which is certified for this product (see Technical data, page 18). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. 2 Overview Top view a The power outlet shall be installed near the product and shall be easily accessible. CAUTION! Always use the projector off.
Front view Rear view a a b b a VGA port a Projection lens Connect to the VGA port on a computer. b Front IR sensor b Rear IR sensor Side view Remote control a b c d e f g k AV MICRO SD HDMI 1 HDMI 2 USB a j DC b i OK a 3.5 mm audio output; connect to external speakers or headphones. c h d b c d e f 3.5 mm audio/video input; connect to the analogue audio jacks and/or composite video jack on a playback device. MicroSD card slot Connect to a microSD card for media playback.
f g Start, pause or resume media playback. / Skip to the previous or next video file. 3 Initial setup Notice Make sure all devices are disconnected from their power supplies before establishing or changing any connections. h Return to the previous screen or exit the current screen. i Navigation buttons (Up, Down, Left, Right) • Navigate items on the screen. • Press / to change the value for the current setting. j Quick access to the setup options (e.g. picture and sound options).
Prepare the remote control CAUTION! The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control. Never expose the remote control to direct sunlight. Avoid deforming, dismantling or charging the batteries. Avoid exposure to open fire and water. Replace empty batteries immediately. Remove the batteries from the remote control if not in use for long periods of time. 1 Open the battery compartment.
Image focus adjustment To adjust image focus, turn the focus adjustment knob at the top of the projector. 4 Connect to playback devices Notice Make sure all devices are disconnected from their power supplies before establishing or changing any connections. NeoPix Image shape adjustment To adjust image shape, turn the keystone adjustment knob at the top of the projector. Connect to devices through HDMI You can connect a playback device (e.g.
Connect to devices through AV You can connect a playback device (e.g. a DVD player, gaming console, camcorder or digital camera) to the projector through AV connection. With this connection, images are shown on the projection screen, and audio is played on the projector. 1 Using an RCA cable with 3.5 mm plug (not included in the box), connect the AV jack (3.5 mm) on the projector to the analogue audio output jacks (red and white) and/or composite video output jack on a playback device.
Connect to external speakers or headphones You can connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones. DANGER! 5 Play videos from storage devices Using the projector, you can access and play video files stored on a local storage device. Notice Danger of hearing damage! The projector supports a USB storage device that is formatted for FAT16 or FAT32 file system.
To open a selected folder, press the OK button. To return to the parent folder, select Up Folder on the screen. To exit the current on the folder and storage device, press remote control or select RETURN on the screen. If you select a video file and wait more than 3 seconds, the projector will begin playing a preview of the video from the beginning. 5 Press the OK button or on the remote control to start playing a selected video file.
6 Change settings This section helps you change the settings of the projector. Picture settings 1 Press 2 Select a picture option, and then press / or the OK button to change the value. • Picture Mode: Select predefined color settings for picture or video display. Select User to customize the following settings: • Contrast: Set color contrast. • Brightness: Set color brightness. • Color: Set color saturation. • • • • on the remote control. Language settings 1 2 Sharpness: Set image sharpness.
/ or the OK button to rotate or flip the projection screen. Set sleep timer Select a period of time after which the projector turns off automatically. The default value is Off. 1 Press 2 Select Sleep Timer, and then press / or the OK button to select a period of time (in minutes). on the remote control. Set auto sleep Select a period of time so that the projector turns off automatically after the selected period of inactivity. The default value is Never.
7 Maintenance CAUTION! Do not turn off the projector or remove the USB flash drive during a software update. Cleaning DANGER! Follow the following instructions when cleaning the projector: Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.
8 Troubleshooting Power cycling If a problem occurs and you cannot resolve it using the instructions in this user manual, try the following steps to resolve the problem. 1 Turn the projector off by pressing 2 Wait at least ten seconds. 3 Turn the projector on by pressing 4 If the problem persists, contact our technical service center or your dealer. twice. once. Problem Solution The projector cannot be turned on. • Disconnect and reconnect the power cable, and try to turn the projector on again.
Problem Solution The projector cannot read the USB storage • The projector does not support the exFAT file device. system. • Format the USB storage device in FAT32 or NTFS format, then use it. The projector does not react to remote control commands. • Check the batteries of the remote control. The temperature of the projector’s surface is warm. • For this projector it is normal to generate moderate heat during operation.
9 Appendixes Technical data Technology/optical Dimensions and weight Unpacked (WxDxH)........................................................ ................ 220 x 170 x 90 mm / 8.6 x 6.6 x3.5 inch Packed (W x D x H)..................267 x 216 x 148 mm Weight....................................................1.2kg / 2.69lbs Display technology................................................LCD Light source..............................................................
CE statement • The product shall only be connected to a USB interface of version USB 2.0 or higher. • Adapter shall be installed near the equipment and shall be easily accessible. • The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C. • The plug is considered as disconnect device of adapter. • The UNII Band 5150-5250 MHz is for indoor use only. • The device complies with RF specifications when the device is used at 20 cm from your body.
exposure and compliance. This device should be installed and operated with a minimum distance of 7.8 inches (20 centimetres) between the device and your body. Other notice Preservation of the environment as part of a sustainable development plan is an essential concern of Screeneo Innovation SA.
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged. NeoPix Ultra One 2022 © Screeneo Innovation SA. All rights reserved.
