User manual

8 Philips · NeoPix 520
Front Ceiling
1 Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
2 Access the projector's settings menu by
pressing on the remote control or
on the projector. Then select Projector >
Install Mode > Front Ceiling.
Rear
1 Place the projector on a table behind the
projection screen. A special rear projection
screen is required.
2 Access the projector's settings menu by
pressing on the remote control or
on the projector. Then select Projector >
Install Mode > Rear.
Rear Ceiling
1 Mount the projector on ceiling with upside
up behind the projection screen. To mount
the projector on ceiling behind the screen,
a projector mount and a special rear
projection screen are required.
2 Access the projector's settings menu by
pressing on the remote control or
on the projector. Then select Projector >
Install Mode > Rear Ceiling.
Connect to power supply
CAUTION!
Always use the button to turn the
projector on and off.
1 Select a supplied power cable with the
correct plug (EU/UK/US).
2 Connect the power cable to the power jack
at the bottom of the projector.
3 Connect the power cable to an electrical
socket.
• The power LED on the projector lights
up in red.
b
c