User manual

Initial setup 7
a
Microphone
b
Access the voice command or search
function (Google Assistant).
c
OK
Confirm a selection or change the value for
the current setting.
d
Display installed apps and access the app
store.
e
VOL +/-
Increase or decrease the volume of Android
TV or the projector.
f
NETFLIX
Quick access to the Netflix service.
g
prime video
Quick access to the Amazon Prime Video
service.
h
Access or exit the projector's settings menu.
i
Return to the previous screen.
j
Access the Android TV home screen.
k
Navigation buttons (Up, Down, Left, Right)
• Navigate items on the screen.
• Press
/ or /
to change the value
for the current setting
.
• Press / to move backward or
forward in the current video
.
l
LED indicator
• Each time you press a button on the
remote control, the indicator flashes.
• Blue light indicates the remote control
is in Android TV mode and you can
use it to navigate the Android TV user
interface.
• Red light indicates the remote control is
accessing the projector's settings menu
and you cannot use it to navigate the
Android TV user interface.
m
Switch the projector on or to standby
mode.
3 Initial setup
Notice
Make sure all devices are disconnected
from their power supplies before
establishing or changing any
connections.
Install the projector
You can install the projector in four different
ways. Follow the guidelines below to correctly
install the projector.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, this product
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front
1 Place the projector on a flat surface such
as a table in front of the projection surface.
This is the most common way to position
the projector for quick setup and portability.
2 If the projection direction is incorrect,
access the projector's settings menu by
pressing on the remote control or
on the projector. Then select Projector >
Install Mode > Front.