User manual

Change settings 17
Change projector settings
1 Press on the remote control or
on the projector to access the projector's
settings menu.
2 Use the navigation buttons and the OK
button to select a menu item.
3 Press / or / to select a value for the
menu item.
4 Press the OK button to make the change.
Note: For some menu items such as Digital
Zoom, the change takes effect once you
select a different value.
5 Press on the remote control or
on the projector to exit the projector's
settings menu.
Input source settings
You can view and change the following input
source settings.
• Android TV: Select this to use the built-in
Android TV Dongle as the input source. This
is the default input source.
• HDMI1: Select this to use the device
connected to the projector's HDMI 1 port as
the input source.
• HDMI2: Select this to use the device
connected to the projector's HDMI 2 port
as the input source.
• USB-C: Select this to use the device
connected to the projector's USB-C port as
the input source.
• EasyLink (CEC): Choose to enable or
disable HDMI™ CEC (Consumer Electronics
Control). The default value is Disabled. Tip:
Both the HDMI™ ports on the projector
support HDMI™ CEC.
• HDMI Mode: Choose which HDMI™ mode
to use.
• Normal (Video): Use the normal video
range (16-235) commonly used with
most media devices.
• Extended (PC): Use the extended video
range (0-255) used with PC devices.
Tip: Choose "Normal" mode unless your
external device requires "Extended" mode
to display correctly. Refer to the user
manual of the external device for more
information.
Picture settings
You can view and change the following picture
settings.
• Picture Mode: You can set the projector
to use the following picture modes,
depending on your viewing environment or
preferences. After selecting a picture mode,
you can modify its settings.
• Standard: Display the picture with
normal brightness, contrast, saturation,
hue and sharpness levels.
• Vivid: Sharpen the image by increasing
the contrast, saturation and sharpness.
• Movie: Optimize the settings for movies.
• User: Define your own settings.
• Color Temperature: You can set the
projector to use the following color
temperature types. After selecting a color
temperature type, you can modify its
settings.
• Cool: Make the picture more bluish.
• Standard: Use a moderate color
temperature.
• Warm: Make the picture more reddish.
• User: Define your own settings.
• Brightness: Adjust the screen's overall
brightness.
• Contrast: Adjust the contrast of the bright
and dark areas of the image.
• Saturation: Adjust the intensity of the
colors.
• Hue: Adjust the hue of the colors.
• Sharpness: Adjust the sharpness of the
image.
• Red Gain: Adjust the gain for red.
• Green Gain: Adjust the gain for green.
• Blue Gain: Adjust the gain for blue.
• Noise Reduction: Turn off noise reduction
or set its level to Low, Middle or High.