NeoPix Easy+ EN User Manual FR Manuel utilisateur DE Bedienungsanleitung ES Manual del usuario IT Manuale d´uso Mini projector Register your product and get support at www.philips.
User Manual NeoPix Easy+ Mini projector Register your product and get support at www.philips.
Table of contents Introduction �������������������������������������������������3 9 Change settings ���������������������������������� 15 Dear customer ���������������������������������������������������������������3 Picture settings ������������������������������������������������������������15 About this user manual ����������������������������������������������3 WiFi settings �����������������������������������������������������������������15 What’s in the box ��������������������������������������
Introduction What’s in the box Dear customer b Remote control with 2 AAA batteries Thank you for purchasing this projector. d Power plugs (EU, UK, US) We hope you enjoy this product and the many functions it offers! a NeoPix Easy+ projector (NPX445) c A/C power adapter e Quick Start Guide f Lens cover a About this user manual The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. Setting up the product This product is for indoor use only. Place the product securely on a stable, flat surface.
Power supply Use only a power adapter which is certified for this product (see Technical data, page 19). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. 2 Overview Top view a b The power outlet shall be installed near the product and shall be easily accessible. CAUTION! Always use the projector off.
Front view Remote control a b a h b g OK a Projection lens b Front IR sensor f Side view a b c AUX MICRO SD c e d d e f HDMI USB DC a 3.5 mm audio output; connect to external speakers or headphones. b a Access the home menu. 3.5 mm audio input; works only through VGA connection. c Micro SD card slot Connect to a Micro SD card for media play. b d d Connect to the HDMI output on a playback device. e USB port Connect to a USB storage device for media play.
Access home menu The home menu provides easy access to connected devices, setup and other useful features in the projector. 1 Press 2 Press the Navigation buttons and OK to select the following. . The home menu is displayed. 3 Initial operation Placing projector You can install the projector in four different configuration. Follow the guidelines below for different projector placement.
Changing screen size The projection screen size (or size of images) is determined by the distance between the lens of the projector and the projection surface. • • 2 To adjust projection to the correct position, press , and select Settings - Picture Settings - Projection Location - Front Ceiling. The projection image size is to up to 80’’ (200 cm). The projection distance is 80 cm 200 cm/24”- 60”. Connecting power supply CAUTION! Always use the button to turn the projector on and off.
Preparing the remote control AUX AUX CAUTION! MICRO SD MICRO SD HDMI HDMI USB USB DCDC The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control. Never expose the remote control to direct sunlight. Avoid deforming, dismantling or charging the batteries. Avoid exposure to open fire and water. 3 Replace empty batteries immediately. To adjust image focus, turn the focus knob on the top of the projector.
4 Connect to playback devices 1 Using a VGA cable, connect the VGA connector on the projector to the VGA output on a computer. Notice Make sure all devices are disconnected from the power outlet before establishing or changing any connections. VGA Connecting to devices through HDMI Connect a playback device (e.g. a Blu-ray player, gaming console, camcorder, digital camera or PC) to the projector through HDMI connection.
Notice AUX connection only works through VGA connection. Connecting to external speakers or headphones Connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones. 5 Wireless projection with Android devices What you need • DANGER! Danger of hearing damage! Before connecting the headphones, turn down the volume on the projector.
6 Wireless projection with iOS devices What you need • • 1 Turn on WiFi on your iPhone. Turn on WiFi on the projector (press and select Settings - WiFi Setting - Enable WiFi - On). Press to turn on the projector. The home menu is displayed. 6 After successful connection, the screen content of your iPhone is casted to the projection surface. Trademark notice Apple, AirPlay and the AirPlay logo are trademarks or registered trademarks of Apple, Inc. in the US and other countries.
7 Connect to wireless speaker 8 Media playback Through Bluetooth, you can stream music wirelessly from the projector to a Bluetooth speaker. Notice This section helps you use the projector to play media from a wide range of sources. The projector supports a USB storage device that is formatted for FAT16 or FAT32 file systems. Notice The projector cannot be connected to a smartphone or tablet for music streaming through Bluetooth. 1 Turn on Bluetooth on the projector.
7 Select a video file and press OK to play video. Photo playback 8 During video playback, press OK. The playback control icons are displayed at the bottom of the projection screen. You can access the following playback functions. Supported file formats The following file formats are supported: .jpeg/. bmp/.
9 Change settings • • This section helps you change the settings of the projector. Picture settings 1 Press 2 Select Settings, and then press OK. 3 Select Picture Settings, and then press OK. 4 Select a picture option, and then press / to change: • • • • • • WiFi settings 1 Press 2 Select Settings, and then press OK. 3 Select WiFi Setting, and then press OK.
10 Service Update SW through Internet 1 Cleaning Connect the projector to the Internet. Press , and then select Settings - WiFi Setting. • DANGER! Instructions for cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.
Problems Solutions The projector cannot be turned on. • Disconnect and reconnect the power cable, and try to turn the projector on again. The projector cannot be turned off. • Press and hold longer than ten seconds. If this does not work, disconnect the power cable. No image from the external HDMI device. • Disconnect the HDMI cable or switch off the HDMI device. • Wait three seconds. • Reconnect the HDMI cable or switch on the HDMI device again. No sound from the external connected device.
Problems Solutions When I view videos, the sound or the • The available WiFi bandwidth is insufficient for picture is sometimes distorted or the sound sending the video flawlessly from the smartphone is not synchronized to the picture. to the projector. This can happen if one or more WiFi networks operate in the same frequency range nearby. Certain IoT devices (e.g. ZigBee enabled devices) also operate in this frequency range.
11 Appendix Technical data Technology/optical Display technology ...............................................LCD Light source .............................................................LED Resolution ........................................ 800 × 480 pixel LED lifetime .......................................up to 20,000 h Contrast ratio..................................................... 3000:1 Aspect ratio .............................................................16:9 Throw ratio .................
device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
operating and maintenance instructions. Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste.
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by Screeneo Innovation SA., further referred to in this document as Screeneo Innovation SA., and is the manufacturer of the product. 2019 © Screeneo Innovation SA. All rights reserved. Headquarters: Screeneo Innovation SA. Route de Lully 5C 1131 - Tolochenaz – Switzerland www.philips.