User manual

Connect to other devices 11
2 To activate the HDMI™ ARC function on the
projector, press on the remote control
and then select Sound > Output > ARC.
Connect to a dongle
You can connect a dongle (e.g. Amazon Fire
Stick, Roku Stick and Chromecast) to the
projector to easily watch videos over the
internet. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1 Connect the dongle to the projector's
HDMI port using an HDMI™ cable.
2 Connect the dongle to the projector's
USB port using a USB cable
. Note: The
maximum current supplied by this port is
5V1.5A.
USB HDMI
External Dongle
(not included)
Connect to wired speakers
or headphones
You can connect wired speakers or headphones
to the projector. With this connection, audio
from the projector is played through the
external speakers or headphones.
• The internal speakers of the projector
are deactivated automatically when
external speakers or headphones are
connected to the projector.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1 Using a 3.5 mm audio cable, connect the
jack on the projector to the analogue audio
input (3.5 mm jack, or red and white jacks)
on external speakers. Or connect the jack
on the projector to headphones.
USB HDMI
2 After connecting the speakers or
headphones, press / on the remote
control to adjust the volume to the desired
level.