NeoPix Start+ EN User Manual FR Manuel utilisateur DE Bedienungsanleitung ES Manual del usuario IT Manuale d´uso Mini projector Register your product and get support at www.philips.
User Manual NeoPix Start+ Mini projector Register your product and get support at www.philips.
Table of contents Introduction...................................................3 7 Dear customer................................................................. 3 Cleaning............................................................................15 About this user manual................................................ 3 Update software............................................................15 What’s in the box............................................................ 3 Troubleshooting......
Introduction What’s in the box Dear customer b A/C power adapter Thank you for purchasing this projector. d Quick Start Guide We hope you enjoy this product and the many functions it offers! a NeoPix Start+ projector (NPX245) c Remote control with 2 AAA batteries e Power plugs (EU, UK, US) a About this user manual The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Do not try to replace the built-in battery yourself. Incorrect handling of the battery or using the wrong type of battery can cause damage to the product or cause injury. DANGER! Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data.
Power supply Use only a power adapter which is certified for this product (see Technical data, page 17). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. 2 Overview Top view The power outlet shall be installed near the product and shall be easily accessible. NeoPix Start+ The capacity of the built-in battery diminishes with time.
Side view Remote control a b c OFF/ON HDMI USB a h b g OK f a c e Switch on or off the battery power supply. b HDMI Connect to the HDMI output on a playback device. c Standard USB port • Connect to a USB storage device for media play. • Used for software update. d Rear view a b cd e a Select an input source: AV, HDMI or Media Player. b DC5V DC AV MICRO SD Confirm a selection or entry. c d Return to a previous menu screen. / Increase or decrease volume.
Access home menu The home menu provides easy access to media player, setup and other useful features in the projector. 1 Press 2 Press the Navigation buttons and OK to select the following. . The home menu is displayed. 3 Initial operation Placing projector You can install the projector in four different configuration. Follow the guidelines below for different projector placement.
• The projection distance ranges from 80 cm to 200 cm/24”-60”. Connecting power supply The projector can be operated either on AC power or built-in battery. CAUTION! 2 Rear table 1 2 Always use the button to turn the projector on and off To adjust projection to the correct position, press , and go to SETUP - Panel Flip Rotate. Place the projector on a table behind the projection screen. A special rear projection screen is required.
Battery power operation DANGER! The projector can be also operated on built-in battery for portability. Risk of explosion with incorrect type of batteries! Charging projector There is a risk of explosion if the incorrect battery type is used. Do not try to replace the built-in battery yourself. Before first use, charge the projector for 2 hours. Two options are available to charge the projector. Option 1: • • Adjust the switch to the position.
Power on and setup Notice The projector cannot be turned on using USB power (DC 5V). 1 4 Connect to playback devices Notice Press to turn on the projector. The LED on the projector turns from red to green. • 2 To turn off the projector, press again. The LED on the projector turns from green to red. • The distance between the projector and the screen determines the actual size of the image. To adjust image focus, turn the focus knob around the lens of the projector.
1 Using a RCA cable with 3.5 mm plug, connect the AV connector (3.5 mm) on the projector to the analogue audio output jacks (red and white) and/or composite video output jack on a playback device. DC5V DC AV DC5V AV MICRO SD MICRO SD 2 2 DC When connecting to the headphones, use the volume control on the remote control to adjust the volume to a comfortable level. Press to display the input source list, and then select AV.
5 Media playback This section helps you use the projector to play media from a wide range of sources. Notice The projector supports a USB storage device that is formatted for FAT16 or FAT32 file systems. player and access video files. • 5 6 Movie playback The following file formats are supported: .dat/.mpg/.mpeg/.ts/.trp/.tp/.vob/.mp4/.mkv/. avi/.flv/.3gp Connect a USB storage device to the USB port on the projector.
• 4 5 If music media player is selected, only the playable music files can be displayed. Select a music file and press OK to play music. slide show. 5 During music playback, press OK. The playback control icons are displayed at the bottom of the projection screen. You can access the following playback functions.
6 Change settings Language settings This section helps you change the settings of the projector. 1 Press 2 Select SETUP, and then press OK to access the setting options. 3 Select OSD Language, and then press / on the remote control to select your desired language for on-screen menu. Picture settings 1 Press 2 Select SETUP, and then press OK to access the setting options.
7 Service Cleaning • 3 DANGER! 4 Turn on the projector, then the upgrade starts automatically. The LED on the projector blinks during upgrade. 5 Wait about 15 seconds. The upgrade completes and the projector turns off automatically. 6 Disconnect the USB from the projector, then turn on the projector. Instructions for cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.).
Troubleshooting 1 Turn the projector off by pressing Power cycling 2 Wait at least ten seconds. 3 Turn the projector on by pressing 4 If the problem persists, please contact our technical service centre or your dealer. If a problem occurs that cannot be corrected with the instructions in this user manual, follow the steps given here. . once. Problems Solutions The projector cannot be turned on. • Disconnect and connect the power cable and try to turn the projector on again.
8 Appendix Technical data Technology/optical Optical technology ...............................................LCD Light source ...................................................RGB LED Resolution ......................................... 240 × 320 pixel LED lifetime .......................................up to 20,000 h Contrast ....................................................................60:1 Aspect ratio .............................................4:3 and 16:9 Throw ratio ........................
• • The CE marking certifies, that the product meets the main requirements of the European Parliament and Council directives EMC directive 2014/30/EU, LVD directive 2014/35/EU, EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 60065:2014+A11:2017 on information technology equipment, regarding safety and health of users and regarding electromagnetic interference. The Declaration of Compliance can be consulted on the site www.philips.com/ projection.
operating and maintenance instructions. Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste.
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by Screeneo Innovation SA., further referred to in this document as Screeneo Innovation SA., and is the manufacturer of the product. 2019 © Screeneo Innovation SA. All rights reserved. Headquarters: Screeneo Innovation SA. Route de Lully 5C 1131 - Tolochenaz – Switzerland www.philips.
