NeoPix Start EN User Manual FR Manuel utilisateur DE Bedienungsanleitung ES Manual del usuario IT Manuale d’uso Mini projector Register your product and get support at www.philips.
User Manual NeoPix Start Mini projector Register your product and get support at www.philips.
Table of contents Introduction..................................................3 7 Dear customer................................................................3 Cleaning..........................................................................14 About this user manual...............................................3 Update software..........................................................14 What’s in the box...........................................................3 Troubleshooting.................
Introduction What’s in the box Dear customer b A/C power adapter Thank you for purchasing this projector. d Quick Start Guide We hope you enjoy this product and the many functions it offers! a NeoPix Start projector (NPX240) c Remote control with 2 AAA batteries e Power plugs (EU, UK, US) a About this user manual The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. Setting up the product This product is for indoor use only. Place the product securely on a stable, flat surface.
Power supply Use only a power adapter which is certified for this product (see Technical data, page 17). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. 2 Overview Top view The power outlet shall be installed near the product and shall be easily accessible. NeoPix Start CAUTION! Always use the the projector.
Side view Remote control a b HDMI USB a h b g OK f a HDMI c e Connect to the HDMI output on a playback device. b Standard USB port • Connect to a USB storage device for media play. • Used for software update. d Rear view a bc d a Access input source list. DC AV MICRO SD b Confirm a selection or entry. c d Increase or decrease volume. a Connect to the power supply. b AV 3.5 mm audio/video input; connect to the analogue audio jacks and/or composite video jack on a playback device. c 3.
Access home menu The home menu provides easy access to media player, setup and other useful features in the projector. 1 Press 2 Press the Navigation buttons and OK to select the following. . The home menu is displayed. 3 Initial operation Placing projector You can install the projector in four different configuration. Follow the guidelines below for different projector placement.
Changing screen size The projection screen size (or size of images) is determined by the distance between the lens of the projector and the projection surface. • The projection image size ranges from 20” to 60”. The projection distance ranges from 80 cm to 200 cm / 24”-60”. • 2 To adjust projection to the correct position, press , and go to SETUP - Panel Flip Rotate.
Preparing the remote control Power on and setup 1 CAUTION! • The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control. Never expose the remote control to direct sunlight. Avoid deforming, dismantling or charging the batteries. Press to turn on the projector. The LED on the projector turns from red to green. 2 To turn off the projector, press again. The LED on the projector turns from green to red.
4 Connect to playback devices jacks (red and white) and/or composite video output jack on a playback device. DC AV MICRO SD Notice Make sure all devices are disconnected from the power outlet before establishing or changing any connections. Connecting to devices through HDMI Connect a playback device (e.g. a Blu-ray player, gaming console, camcorder, digital camera or PC) to the projector through HDMI connection.
DC AV MICRO SD 5 Media playback This section helps you use the projector to play media from a wide range of sources. Notice The projector supports a USB storage device that is formatted for FAT16 or FAT32 file systems. Movie playback Supported file formats 2 When connecting to the headphones, use the volume control on the remote control to adjust the volume to a comfortable level. The following file formats are supported: .dat/.mpg/.mpeg/.ts/.trp/.tp/.vob/.mp4/.mkv/. avi/.flv/.
4 Select MOVIE to activate video media player and access video files. • 5 6 If video media player is selected, only the playable video files can be displayed. Select a video file and press OK to play video. • 4 5 During video playback, press OK. The playback control icons are displayed at the bottom of the projection screen. You can access the following playback functions. Music playback The playback control icons are displayed at the bottom of the projection screen.
4 Select a photo file and press OK to start slide show. 5 The playback control icons are displayed at the bottom of the projection screen. You can access the following playback functions.
Restore default settings 1 Press . 2 Select SETUP, and then press OK to access the setting options. 3 Select Restore Factory Default, and then press OK. 4 Follow the on-screen instructions to start or cancel resetting. 7 Service Cleaning DANGER! Instructions for cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector.
• 3 Make sure the unzipped file name is “GXY_MELODY.bin” or “GXY_ MELODY_64.bin”. Turn off the projector, then connect the USB flash drive to the projector. 4 Turn on the projector, then the upgrade starts automatically. The LED on the projector blinks during upgrade. 5 Wait about 15 seconds. The upgrade completes and the projector turns off automatically. 6 Disconnect the USB from the projector, then turn on the projector.
Troubleshooting 1 Turn the projector off by pressing Power cycling 2 Wait at least ten seconds. 3 Turn the projector on by pressing 4 If the problem persists, please contact our technical service centre or your dealer. If a problem occurs that cannot be corrected with the instructions in this user manual, follow the steps given here. . once. Problems Solutions The projector cannot be turned on. • Disconnect and connect the power cable and try to turn the projector on again.
8 Appendix Technical data Technology/optical Product details Dimensions (W × D × H) . ......... 130 x 80 x 50 mm Weight .....................................................................258 g Operating temperature.................................. < 40 °C Storage temperature....................................... < 60 °C Optical technology ...............................................LCD Light source ...................................................RGB LED Package content Resolution .............
• • The CE marking certifies, that the product meets the main requirements of the European Parliament and Council directives EMC directive 2014/30/EU, LVD directive 2014/35/EU, EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 60065:2014+A11:2017 on information technology equipment, regarding safety and health of users and regarding electromagnetic interference. The Declaration of Compliance can be consulted on the site www.philips.com/ projection.
Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste. Batteries: If your product contains batteries, they must be disposed of at an appropriate collection point. Product: The crossed-out waste bin symbol on the product means that the product belongs to the family of electrical and electronic equipment.
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by Screeneo Innovation SA., further referred to in this document as Screeneo Innovation SA., and is the manufacturer of the product. 2019 © Screeneo Innovation SA. All rights reserved. Headquarters: Screeneo Innovation SA. Route de Lully 5C 1131 - Tolochenaz – Switzerland www.philips.
