Register your product and get support at NP1100/05 NP1100/12 EN User manual Contact information 3 31
Safety Notice Disposal of product and packing material 2 Your Streamium Network Music Player Overview Front view Top view Rear view Remote control 4 4 5 6 8 8 8 8 8 8 3 Prepare 10 Install remote control batteries Position your NP1100 10 10 4 Connect 11 Connect audio device Connect AC power First-time setup Create wireless connection Create wired connection 11 11 11 12 12 5 Turn on / switch to standby 13 6 Play 14 Adjust volume Mute Repeat play Shuffle play Stream music from a UPnP device
1 Important Safety Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. p Apparatus shall not be exposed to dripping or splashing. q Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
is used, the fuse at the distribution board should not be greater than 5 Amp. The severed plug must be disposed off to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. Norge Typeskilt finnes på apparatens bakside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke fraktoplet nettet så lenge apparatet er tilsluttet nettkontakten. For å redusere faren for brann eller elektrisk støt, skal apparatet, ikke utsettes for regn eller fuktighet.
Disposal of product and packing material Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. 0984 When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2002/96/EC. Please be informed about the local separate collection system for electrical and electronic products.
2 Your Streamium Network Music Player Rear view Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Overview Front view a LINE OUT (red/white) jacks b DIGITAL OUT (black) jack c jack d ETHERNET jack e POWER SUPPLY jack Remote control You can control the NP1100 with the remote control.
p RATE (skip back) Eng lis h o q HOME r SHUFFLE (random play) Your Streamium Network Music Player s REPEAT t MUSIC u INTERNET RADIO a b MUSIC SERVICES (optional feature available in some regions) c SETTINGS d DIM (adjust display) e FAVORITE f SEARCH (navigate) g h OK / i j (confirm / play/pause) (skip forward) (stop) k + VOL l MUTE m CLEAR n a/A (case shift) EN
3 Prepare Install remote control batteries Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of decreased battery life! Never mix different brands or types of batteries. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. 1 2 3 Open the battery compartment. Insert two AAA batteries with correct polarity (+/-) as indicated. Close the battery compartment.
• The type plate information is located at the back or the underside of the NP1100. Connect audio device 1 2 3 Use the supplied red and white audio cables to connect the AUX IN jacks of the sound system with the red and white (see ‘Rear view’ on page 8)LINE OUT jacks (see ‘Rear view’ on page 8) of the NP1100. Set the source of the sound system to ‘AUX’. Control the sound system as you normally would.
7 Tip • After the first-time set-up, you can change the language, date and time in the Settings menu. Create wireless connection 1 2 3 4 5 6 Hold ready your network name and network password or encryption key. Follow the steps in chapter Set up the player for the first time (see ‘First-time setup’ on page 11) until the display shows the network menu options [Search for networks] or [SSID]. Press to select [Search for networks], then press . Press .
Eng lis h 5 Turn on / switch to standby Turn on / switch to standby You can select from the following status options: • On • Standby • The button on the remote control can turn on the NP1100. • The NP1100 remembers the last audio source you selected. Note • In stop mode, if no buttons are pressed for 20 minutes, the NP1100 switches to standby. 1 2 To turn on the NP1100, press . To switch the NP1100 to standby, press .
6 Play • • The play / pause and stop operations on the remote control of the NP1100 are the same for any music source that you choose: • 1 2 3 4 5 Press HOME. Press to select source, then press . Press , then to select options. Press OK / to play. • Press OK / to toggle between pause and play. Press [Repeat all] All audio files of the current selection are continuously repeated until another mode or setting is selected.
Scroll at high speed You can share music from a PC with the NP1100. This chapter shows you how to configure the PC to share music. You can find a file with fast scroll, which scrolls through all files in the current list. Scroll speed depends on the length of the list. 2 3 4 5 6 7 8 9 Follow the instructions to install Windows Media Player 11. On the PC, click Start > Programs > Windows Media Player.
Internet radio Note Note • Internet radio features require broadband Internet access. • Internet radio features require broadband Internet access. Mark radio stations as Favorites Listen to Internet radio 1 2 3 4 • Ensure that the NP1100 is turned on. Ensure that the NP1100 is connected to the Internet.
Select [Internet Radio] > [Favorite Stations]. Press to select, then press . • To return to the Home menu, press HOME. Note 13 Enter a description in the third column. 14 Click on Save to confirm your entries. Note • If the manually added Internet radio station is available • Internet radio features require broadband Internet access. • • Manually add Internet radio stations This chapter explains how to register with Philips and add individual URL addresses for Internet radio stations on the PC.
1 18 Press list.
1 2 3 Press HOME. Press to select [Settings], then press . Press to select the setting that you want to change, then press . • To return to the Home menu, press HOME. Adjust display This chapter shows you how to adjust the following display settings: • DIM settings (see ‘Adjust DIM settings’ on page 19) • Brightness (see ‘Adjust brightness’ on page 19) Adjust DIM settings 1 2 3 4 • • • 1 Ensure that the NP1100 is turned on. Press HOME. Select [Settings] >[DIM Settings] .
Set the date 1 2 3 4 5 6 • Ensure that the NP1100 is turned on. Press HOME. Select [Settings] > [Date and time]. Press or , then to select [Set date]. Press or to adjust, then the date. to confirm Press to return to the previous selection menu. • To return to the Home menu, press HOME. Set sleep timer You can select a set time period after which the NP1100 automatically switches to standby. The timer offers the following options: • [Off] • [15 minutes] • [30 minutes] • [1 hour] • [1.
3 4 5 6 7 Eng lis h Use the an Ethernet cable (sold separately) to connect the NP1100 to the router that is connected to your home network with broadband Internet access. Ensure that the NP1100 is turned on. Press HOME. Set the date 2 Press , then to select [Settings] > [Network setup] > [Wired]. Select [Automatic] (DHCP). Select (Enable Proxy?) [No (default)]. È The NP1100 displays a confirmation screen that the settings are saved.
8 Maintenance Update through PC connection Cleaning 1 Note • Avoid moisture and abrasion. 1 Clean the NP1100 only with a soft dry cloth. Update When the NP1100 is connected to a home network or PC, you can download new firmware updates. Depending on your connection you have two options: • Update through wireless connection (see ‘Update through wireless connection’ on page 22) • Update through PC connection (see ‘Update through PC connection’ on page 22) 2 3 4 5 6 7 8 9 On the PC, visit the www.
Press to select [Yes]. È The NP1100 restarts when the factory settings are restored. Eng lis h 5 È The language selection display is shown. Maintenance Tip • You can restore the default settings without losing the audio files on the harddisk of a connected PC or Center.
9 Technical data General AC Power DC Power Dimensions (w x h x d) Weight (net) Voltage information is printed on the back or the underside of the NP1100. 5V / 1 A 195 x 104 x 38 mm approx. 0.44kg Wired standard Speed Mode Crossover detection (Auto MDIX) 802.3 / 802.3 u 10 / 100 MBit/s half / full duplex Yes Display Resolution Size Dot matrix 128 x 64 dots 4.1 inches Specifications and external appearance are subject to change without notice.
• Eng lis h Adapter • Ethernet enabled (for wired connection) • Wireless network 802.
10 Troubleshooting I cannot hear any sound or the sound is poor, what do I do? Press + VOL - to increase the volume. • Press the MUTE button again to reactivate • the sound output. Is there a maximum distance of transmission between a Center and the NP1100 for effective streaming? Yes. The maximum distance of Wi-Fi transmission is 250m measured in open spaces. However, in a home environment, where solid obstacles such as walls and doors are present, the effective transmission distance is reduced to 50-100m.
AAC (Advanced Audio Coding) An audio compression scheme defined as part of the MPEG-2 standard (also known as MPEG2 AAC or MPEG-2 NBC, or Not Backwards Compatible). It offers better sound and a compression ratio that is superior by roughly 30 percent compared to the MPEG-1 MP3 format. DC (direct current) Direct current or continuous current is the constant flow of electric charge. This is typically in a conductor such as a wire.
individuals is often much more restricted. A good full-range speaker system however, reproduces as much of this range as possible to cover all variations. Individual drivers are limited to reproduce only that part of the spectrum for which they were made, so their response is limited, but still a necessary point to consider when designing a complete sound system. H Hz (Hertz) Cycles per second, named after Heinrich Hertz. I Impedance The resistance to the flow of an electric current in a circuit.
O Ohm Measure of resistance to current (impedance). The lower the impedance of a speaker, the harder it is to drive. P PCM (Pulse Code Modulation) Pioneering form of digital recording. R RF (radio frequency) An alternating current or voltage with a frequency (or carrier wave) above about 100kHz. It is called radio frequency because these frequencies have a capacity to be radiated as electromagnetic waves by radio (and television) stations.
Volume Volume is the most common word used to specify the control of relative loudness of sounds. It also pertains to the function on many electronic devices that is used to control the loudness. W W (wattage) A measurement of power. In speakers, wattage is a term that indicates power-handling characteristics in dealing with electrical voltage inputs from the amplifier.
Contact information Korea 080-600-6600 Luxembourg 40 6661 5644 Malaysia 1800-880-180 Mexico 01-800-504-6200 Canada (Francophone) 1-800-661-6162 Netherlands United States and Canada (English and Spanish speaking) 1-888-744-5477 0900-8407 (€0.20/min) New Zealand 0800-658-224 Argentina (54-11) 4544-2047 Norway 2270-8111 Australia 1300-363-391 Pakistan 051-580-902-3 Austria 810000205 (€0.20/min) Peru 0800-00100 Philippines 632-8164416 Belgium 78250145 (€0.
Streamium terms and conditions Terms and Conditions of Use of your Philips Streamium-enabled Device Congratulations on your purchase of a Philips Streamium-enabled Device (“Device”).These Terms and Conditions of Use give you the rights to use certain features on your Device relating to the streaming of content. You must agree to these Terms and Conditions of Use before using the Device.
or authorization is necessary, it is your responsibility to obtain any such license or authorization.You agree that you are solely liable for any damages you may incur resulting from your failure to obtain the proper license or authorization for use of the content accessible through the Device.You agree that Philips will have no liability to you with regard to your use of the content.
NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER ELECTRONICS B.V. A DUTCH LIMITED LIABILITY COMPANY,WITH ITS PRINCIPAL OFFICE AT GLASLAAN 2, 5616 LW EINDHOVEN,THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).
security of such WM-DRM Software is compromised, Microsoft may revoke (either on its own or upon the request of the owners of Secure Content (“Secure Content Owners”)) the WM-DRM Software’s right to acquire new licenses to copy, store, transfer, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content.
9. Limited Software Warranty. Philips provides the Software ‘as is’ and without any warranty except that the Software will perform substantially in accordance with the documentation accompanying the Software for a period of one year after your first download, installation or use of the Software, whichever occurs first.
© 2008 Koninklijke Philips Electronics N.V. All rights reserved.
