Mini Hi-Fi System 3139 116 19161
English Français Español Deutsch Nederlands Italiano Svenska Dansk Suomi Português ∂ÏÏËÓÈο 2 Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover.
Italiano .................................115 Svenska ...............................137 Dansk ...................................159 Suomi ...................................181 CLASS 1 LASER PRODUCT Português ............................203 ∂ÏÏËÓÈο ............................ 225 Français Español Italiano Nederlands Deutsch Nederlands ............................93 Svenska Deutsch ..................................71 Dansk Español ..................................49 Suomi Français ............
3139 116 19161
General Information ........................ 5 Safety Information ........................... 5 Preparation ................................. 6 - 7 Controls ..................................... 8 - 10 Operating The System ........... 10 - 12 CD ............................................. 13 - 15 GENERAL INFORMATION SAFETY INFORMATION General Information Safety Information • The typeplate (which contains the serial number) is located at the rear of the system.
PREPARATION English Rear Connections STANDBY ON SU BWO OFER LEVEL CONTR OL MIN G MAX CUT OFF FREQUENCY HIGH POWER SUBWOOFER 60Hz 150Hz D AUDIO OUT F E AUDIO IN A DIGITAL OUT L R SUBWOOFER OUT AUX/CDR IN L R LINE OUT FM ANTENNA 75Ω B AM ANTENNA AC MAINS ~ FRONT + H L R L – – R + C 6 3139 116 19161
A AM Loop Antenna Connection E Line Out Connection (wireless Connect the supplied FM wire antenna to the FM ANTENNA 75 Ω terminal. Adjust the position of the FM antenna for the best reception. Outdoor Antenna For better FM stereo reception connect an outdoor FM antenna to the FM ANTENNA 75 Ω terminal using a 75 Ω coaxial wire. C Speakers Connection • Connect the right speaker to Front terminal R, with the coloured wire to + and the black wire to -.
CONTROLS English 9 NEWS•TA DISC 1 RDS DISC 2 DISC 3 DISC CHANGE OPEN•CLOSE 8 7 0 ! 3CD CHANGER 6 CD 2 3 5 CD CHANGER NEWS DIM T.A. SLEEP FRONT BACK 1 REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE INCREDIBLE SURROUND LOUDNESS FLAT SOUND 4 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz VOLUME 8KHz DIGITAL STEREO HIFI SYSTEM CLOCK/ TIMER 3 CDC PRESET A•B ▲ @ # $ % ▲ DIGITAL CONTROL TUNER 3 SEARCH/TUNE PRESET TAPE PLAY / DIM PROG/A.
Controls on the system and remote control 1 STANDBY•ON – to switch the system on or to standby mode. – to use for EASY SET. 2 DIGITAL CONTROL – to select the desired digital sound effect : INCREDIBLE SURROUND – to switch on or off the surround sound effect. BASS+/– to adjust the Bass level. TREBLE+/– to adjust the Treble level. LOUDNESS – to switch on or off the loudness sound effect in low volume level. 3 SOURCE – to select the following: 3 CDC – to select CD mode.
English ≤ SLEEP – to switch the system to standby mode at a selected time period. ∞ BALANCE L/R – to balance the sound level of the Front Left and Right speakers. § MUTE – to switch off the sound temporarily. ≥ TIMER – to switch on or off timer. • B – to switch the system to standby mode. OPERATING THE SYSTEM CD CHANGER NEWS DIM T.A.
Easy Set EASY SET allows you to store all available radio stations and RDS stations automatically. 1 Press and hold STANDBY•ON (on the system only) for 5 seconds; when the system is in standby or demonstration mode. ™ “EASY SET” will be displayed, and followed by “TUNER” and then “AUTO”. ™ EASY SET will start searching for all RDS radio stations with sufficient signal strength and then followed by radio stations on FM, MW and LW band respectively. Weak RDS radio stations may be stored in later presets.
OPERATING THE SYSTEM English Digital Control The Digital Control feature enables you to adjust the system to suit your type of music. INCREDIBLE SURROUND Normal stereo sound is determined by the distance between the front speakers. When Incredible Surround is switched on, it magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. • Press INCREDIBLE SURROUND to switch on. ™ The INCREDIBLE SURROUND display lights up.
NEWS•TA DISC 1 RDS DISC 2 DISC 3 DISC CHANGE OPEN•CLOSE 3CD CHANGER CD CHANGER NEWS DIM T.A. SLEEP FRONT BACK REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE INCREDIBLE SURROUND LOUDNESS FLAT SOUND 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz VOLUME 8KHz DIGITAL STEREO HIFI SYSTEM CLOCK/ TIMER 3 CDC PRESET A•B ▲ ▲ DIGITAL CONTROL TUNER SEARCH/TUNE PRESET TAPE PLAY / DIM PROG/A.
CD English Selecting a desired track Programming Tracks Selecting a desired track when playback is stopped 1 Press S or T (or í / ë on the remote control) until the desired track appears on the display. 2 Press PLAY É to start playback. ™ The selected track number and elapsed playing time appear on the display. Programming tracks of a loaded CD is possible when playback is stopped. The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order.
Shuffle (only on remote control) Repeat (only on remote control) In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed. You can play the current track, a disc or all available discs repeatedly. To shuffle all the discs and tracks 1 Press SHUFFLE. ™ “SHUFFLE” will be displayed. ™ The SHUFFLE flag, the disc and the track selected at random appear on the display.
TUNER English Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER. 2 Press PROGRAM for more than one second. ™ The PROGRAM flag starts flashing and “AUTO” will be displayed. ™ The system will search for every available station in the FM waveband first, then search by the MW and LW wavebands.
Note: – When you press the RDS button and the display shows "NO RDS", it indicates that either the tuned station is not transmitting RDS signal or it is a non RDS station. RDS Clock Some RDS station may be transmitting a real clock time at an interval of every minute. Setting the time with RDS clock 1 Press CLOCK/TIMER. ™ "--:--" or current time appears on the display. 2 Press CLOCK/TIMER once more to enter clock setting mode. ™ "00:00" or current time starts flashing. 3 Press RDS.
TAPE English CD CHANGER NEWS DIM T.A. SLEEP FRONT BACK REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE INCREDIBLE SURROUND LOUDNESS FLAT SOUND 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz VOLUME DIGITAL STEREO HIFI SYSTEM CLOCK/ TIMER 3 CDC PRESET A•B ▲ ▲ DIGITAL CONTROL TUNER SEARCH/TUNE PRESET TAPE PLAY / D. DISPLAY PROG/A.
Notes: – "XXX" denotes the tape counter number. It will automatically set to zero after detecting end of tape or changing tape play direction on TAPE 2. To reset the tape counter number to zero during playback, press the DIM button for more than 2 seconds. – During rewinding or fast forwarding of a tape, it is also possible to select another source (e.g. 3 CDC, TUNER or CDR/ AUX). – Before use, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
RECORDING English CD CHANGER NEWS DIM T.A. SLEEP FRONT BACK REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE INCREDIBLE SURROUND LOUDNESS FLAT SOUND 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz VOLUME 8KHz DIGITAL STEREO HIFI SYSTEM CLOCK/ TIMER 3 CDC PRESET A•B ▲ ▲ DIGITAL CONTROL TUNER SEARCH/TUNE PRESET TAPE PLAY / PROG/A.
Dubbing tapes (from tape deck 1 to tape deck 2) 1 Press TAPE to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2. • Make sure the tape in tape deck 1 has its full spool to the left. 3 (For Tape Deck 2 only) Press SIDE on the remote control to select the recording side. 4 Press DUBBING NORMAL•FAST once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing.
CLOCK TIMER English CD CHANGER NEWS DIM T.A. SLEEP FRONT BACK REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE INCREDIBLE SURROUND LOUDNESS FLAT SOUND 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz VOLUME 8KHz DIGITAL STEREO HIFI SYSTEM CLOCK/ TIMER 3 CDC PRESET A•B ▲ ▲ DIGITAL CONTROL TUNER SEARCH/TUNE PRESET TAPE PLAY / DIM PROG/A.
• To exit without storing the setting, press STOP. • At the preset time, the timer will be activated. ™ The selected source will be played. Notes: – During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. – If the source selected is TUNER, the last tuned frequency will be switched on. – If the source selected is CD, playback will begin with the first track of the last selected disc.
SPECIFICATIONS English Specifications AMPLIFIER Output power ............... 2 x 100 W MPO / 2 x 50 W RMS (1) Signal-to-noise ratio ..................................... ≥ 75 dBA (IEC) Frequency response ......................... 40 – 20,000 Hz, ± 3 dB Input sensitivity AUX/CDR In ......................................................... 500 mV Output Speakers ................................................................ ≥ 6 Ω Headphones ............................................
Maintenance Cleaning the Cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Cleaning the CD lens • After prolonged use, dirt or dust may accumulate at the CD lens.
TROUBLESHOOTING English Tape Deck Operation General “RECORDING ACTIVE” is displayed. • A recording is in progress. ™ Stop the recording or wait until it is finished. System does not react when any button is pressed. • Electrostatic discharge. ™ Press STANDBY•ON to switch the system off. Remove the AC power plug from the wall outlet, then reconnect the power plug and switch on the system again. “CHANGE TO TAPE” is displayed. • Tape dubbing is only possible in tape mode.
