User guide S M A RT. V E RY S M A RT.
México Es necesario que lea cuidadosamente su instructivo de manejo. PRECAUCIÓN - ADVERTENCIA No abrir, riesgo de choque eléctrico ATENCIÓN Verifique que el voltaje de alimentación sea el requerido para su aparato Para evitar el riesgo de choque eléctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro-Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialised company.
Contents English General Information Disc Operations Supplied accessories ............................................ 5 Care and safety information .............................. 5 Playable discs ....................................................... 18 Playing discs ......................................................... 18 Using the Disc Menu ......................................... 19 Basic playback controls .....................................
Supplied accessories Care and safety information Avoid high temperatures, moisture, water and dust – Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid getting dust on the lens.
Connections English Step 1: Placing the speakers and subwoofer Centre speaker 2 Front Speaker (Right) Front Speaker (Left) 1 1 4 3 Rear Speaker (Left) Passive Subwoofer For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position. 1 Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position.
Connections Front Speaker (Right) Front Speaker (Left) English Step 2: Connecting speakers and subwoofer Centre Speaker FRONT FRONT FRONT REAR REAR SUBWOOFER RIGHT LEFT CENTER RIGHT LEFT Rear Speaker (Right) Rear Speaker (Left) Passive Subwoofer Connect the supplied speaker systems using the fixed speaker cables by matching the colours of the jacks and speaker cables. Helpful Hint: – Ensure that the speaker cables are correctly connected.
Connections Option 1 Option 2 1 English Step 3: Connecting TV MW OOFER OOFER MW 2 3 IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV. – Connect the DVD system directly to the TV. Using Composite Video jack 1 Use the supplied composite video cable (yellow) to connect the DVD system’s VIDEO OUT jack to the video input jack (or labelled as A/ V In, Video In, CVBS, Composite or Baseband) on the TV.
Option 3 English Connections Option 4 ANT IN RF coaxial cable to TV 2 Back of RF Modulator (example only) INT IN TO TV VIDEO IN AUDIO IN R L CH3 CH4 3 Antenna or Cable TV signal 1 OOFER REAR SUBWOOFER LEFT 2 1 3 IMPORTANT! If S-Video is used for DVD playback, the system’s VIDEO OUT setting will need to be changed accordingly. Details are on page 23.
Connections English Step 4: Connecting FM/ MW antennas fix the claw into the slot ➠ Step 5: Connecting the power cord 1 MW antenna FRONT FRONT FRONT REAR REAR SUBWOOFER RIGHT LEFT CENTER RIGHT LEFT 1 FM antenna 2 2 ~ AC MAINS Power Outlet 1 Connect the supplied MW loop antenna After everything is connected properly, to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.
Connections (optional) DIGITAL IN 1 OUT Connecting digital audio equipment English Connecting a VCR or Cable/Satellite Box IN TO TV VIDEO S-VIDEO IN AUDIO 2 4 VCR or Cable/ Satellite Box (for example) CD Recorder 3 FRONT FRONT FRONT REAR REAR SUBWOOFER RIGHT LEFT CENTER RIGHT LEFT Viewing and listening to the playback 1 Connect the VCR or Cable / Satellite Box to the TV as shown. 2 Connect the DVD system’s AUDIO INAUX jacks to the AUDIO OUT jacks on the VCR or cable/satellite box.
Functional Overview English Main unit and remote control STANDBY-ON PLAY/PAUSE STOP PROG PREV NEXT SOURCE PHONES OPEN/CLOSE VOLUME 2 1 3 1 STANDBY ON – Switches to standby mode or turns on the system. 2 Disc tray 3 OPEN /CLOSE 0 (DISC mode only) – Opens/ Closes the disc tray. 4 System display panel 5 ÉÅ PLAY/PAUSE – DISC: starts/pauses playback. 4 5 6 7 89 ! 9 PROG – DISC: starts programming. – TUNER: starts manual preset programming. 0 VOLUME (VOL +-) – Adjusts the volume level.
Functional Overview & REPEAT – Selects various repeat modes. English Control buttons available on the remote only * REPEAT A-B – Repeats a specific section on a disc. ≥ @ 8 # 6 ( SUBW +– Adjusts subwoofer’s sound level. § REAR +– Adjusts rear speakers’ sound level. ∞ CENTER +– Adjusts center speaker’s sound level. TV VOL +– Adjusts TV volume (Philips TV only). $ 5 ≤ £ ™ ¡ ) ( 7 0 % ^ & * ) SLEEP – Sets the sleep timer function. ¡ DIM – Selects different levels of brightness for display panel.
Getting Started English Step 1: Inserting batteries into the remote control Step 2: Setting the TV IMPORTANT! Make sure you have completed all the necessary connections. (See pages 8–9 “Connecting TV”). 1 Press SOURCE control until “DISC” appears on the display panel (or press DISC on the remote). 2 Turn on the TV and set to the correct 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3 Close the cover.
Selecting the colour system that corresponds to your TV In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD player should match. Before changing the TV system, determine the colour system of your TV. Setting the TV shape Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
Getting Started English Step 3: Setting the speakers You can adjust the delay time (centre and rear speakers only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. Test Tone - Turning on/off If you have turned on the test tone, the test signal will be automatically generated to help you judge the sound level of each speaker. 1 In disc mode, press SYSTEM MENU. ➜ Use the 1 2 3 4 keys on the remote to navigate in the menu.
Step 4: Setting language preferences You can select your preferred language settings so that this DVD system will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the disc’s default setting language will be used instead. The OSD (on-screen display) language for the system menu will remain as you set it, regardless of various disc languages.
Disc Operations English IMPORTANT! – If the inhibit icon (or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. – Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.
Disc Operations Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item ● Use the 1 2 3 4 keys or numeric keypad (0-9) on the remote, then press OK to start playback. To access the menu ● Press DISC MENU on the remote. For VCDs with Playback Control (PBC) feature (version 2.0 only) ● During playback, pressing DISC MENU will return to the menu screen (if PBC is on).
Disc Operations English Selecting various repeat functions Repeat play mode ● While playing a disc, press REPEAT to select various repeat mode. ➜ "REPEAT” icon will appear on the display, except REPEAT OFF mode. DVD CHAPTER REPEAT ON ™ TITLE REPEAT ON ™ REPEAT-OFF VCD/SVCD/CD REPEAT-ONE (repeat the current track) ™ REPEAT-ALL ™ REPEAT-OFF MP3 REPEAT-ONE ™ REPEAT-ALBUM ™ REPEAT-ALL ™ REPEAT-OFF Helpful Hint: – For VCD, repeat playback is not possible if the PBC mode is switched on.
Using the menu bar to programme Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 14 “Setting the TV”). IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 14 “Setting the TV”.) 1 Stop playback, then press SYSTEM MENU. ➜ The menu bar will appear across the top of the TV screen. 2 Press 1 2 to select and press 4 to enter the programme menu.
DVD Setup Menu Options English Using the menu bar SUBTITLE Select a subtitle language available on the DVD. You can continue a number of operations directly via the multiple menu bars on the TV screen without interrupting the disc playback. The exception is when you enter (SETUP MENU), after which the playback will pause. , AUDIO DVD : Select an audio soundtrack language available on the DVD. VCD : Select audio channels : LEFT VOCAL, RIGHT VOCAL, MONO LEFT, MONO RIGHT or STEREO.
Using the Setup Menu Setting the video output This DVD setup is carried out via the TV, enabling you to customise the DVD system to suit your particular requirements. Choose the type of video output that matches the video connection between the DVD system and your TV. English DVD Setup Menu Options Stop playback, then follow the steps of “Using the Setup Menu” and select : > VIDEO OUT , TV SHAPE TV SYSTEM 4 VIDEO OUT SCR SAVER 1 In disc mode, press SYSTEM MENU.
DVD Setup Menu Options English Screen Saver – turning on / off The screen saver will help to prevent your TV display device from becoming damaged. Follow the steps of “Using the Setup Menu” and select : Setting the digital output Set Digital Output according to the optional audio equipment you connected.
Night mode – turning on/off When activated the night mode, the high volume outputs will be softened and low volume outputs will be brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night. This function can also be accessed via the NIGHT button on the remote. Restoring to original settings Setting the DEFAULT function will reset all options and your personal settings to the factory defaults, except your password for Parental Control.
DVD Setup Menu Options English Restricting playback by Parental Control Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. 1 In disc mode, press SYSTEM MENU.
Changing the password You can change the four-digit password used for Parental Control. Enter your four-digit password to play a prohibited disc or if prompted for a password. The default password is ‘1234.’ 5 Enter the same new four-digit password again. PARENTAL 2 Select icon and press 4. __ __ __ __ MENU LANG Confirm code DEFAULTS 1 In disc mode, press SYSTEM MENU. ➜ Use the 1 2 3 4 keys on the remote to navigate in the menu. PASSWORD Confirm : 6 Press SYSTEM MENU again to remove the menu.
Tuner Operations English IMPORTANT! Make sure the FM and MW antennas are connected. Tuning to radio stations 1 Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “MW”. 2 Press and hold S / T on the remote until the frequency indication starts to change, then release. ➜ The next radio station will tune automatically. Manual presetting You can choose to store only your favourite radio stations. 1 Tune to your desired radio station (see “Tuning to a radio station”).
Other Functions Changing tuning grid Setting the Sleep Timer (not available for all versions) The sleep timer enables the system to switch to standby mode automatically at a preset time. In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas). The preset frequency step in the factory is 9 kHz. IMPORTANT! Changing the tuning grid will erase all previously stored preset radio stations.
Other Functions English Sound Control IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected (see page 7). Selecting surround sound ● Press SURROUND to select multichannel surround or stereo mode. ➜ The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. ➜ The centre and surround speakers operate only in Multi-channel surround mode.
AMPLIFIER SECTION MAIN UNIT Output power - Front - Rear - Centre - Subwoofer Frequency Response Signal-to-Noise Ratio Input Sensitivity - AUX In - TV In Power Supply Rating 3000 W PMPO 30 W RMS / channel 30 W RMS / channel 30 W RMS 50W RMS 180 Hz – 14 kHz / ±3 dB > 60 dB (A-weighted) 400 mV 400 mV 1 8ohm, 1 kHz, 10% THD TUNER SECTION Tuning Range FM 87.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, please consult your dealer or Magnavox for help. Problem No power. Solution – – No picture.
Problem The DVD player does not start playback. Solution – – – – – – Insert a readable disc with the playback side facing down. The DVD+R/CD-R must be finalised. Check the disc type, colour system and region code. Check for any scratches or smudges on the disc. Press SYSTEM SETUP to turn off the setup menu screen. You may need to enter the password in order to change the parental control rating level or to unlock the disc for playback. Moisture has condensed inside the system.
Glossary English Analogue: Sound that has not been turned into numbers. Analogue sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Dolby Pro Logic II: It creates five fullbandwidth output channels from two-channel sources. Decode only systems that derive 5.1 channels instead of the conventional four channels of Dolby Pro Logic surround sound. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image.
Glossary English S-Video: Produces a clear picture by sending separate signals for the luminance and the colour. You can use S-Video only if your TV has an S-Video In jack. Sampling Frequency: Frequency of sampling data when analog data is converted to digital data Sampling frequency numerically represents how many time the original analogue signal is sampled per second.
MAGNAVOX S M A R T. VERY S M A R T. 12nc : 8239 300 31331 First connect ...
Playing a disc 4 ALL AV IN STANDBY-ON PLAY/PAUSE STOP PROG PREV NEXT SOURCE PHONES OPEN/CLOSE VOLUME 4 CH ANN EL 3 Make sure your DVD system and TV are connected and turned on! 3 1 1 2 Press DISC on the remote control. You can also press the SOURCE button on the front panel until “DISC” appears on the display panel. 2 Turn on the TV and select the correct Video In mode.
Guía de utilización rápida En primer lugar conecte ... Consejo útiles A Altavoz delantero (derecho) Puede hacer una conexión de vídeo extra con una de las opciones siguientes si su televisor tiene el mismo conector de entrada : A o B.
Guía rápido Para Uso Primeiro, conecte ... Dicas úteis A Caixa acústica frontal (direita) B Caixa acústica frontal (esquerda) Para obter um efeito melhor de qualidade de imagem, você pode optar por uma conexão extra de vídeo, caso sua TV possua o mesmo conector de entrada: A ou B. C Caixa acústica central D Cabo de vídeo composto E Antena de quadro MW F Antena de fio FM G Subwoofer passivo H Caixa acústica traseira (esquerda) J Caixa acústica traseira (direita) ...