MP3-CD Mini Hi-Fi System User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual Käyttöoppaita Manual do usuário FWM37
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio FWM37 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
26 4 3 6 ^ DISC DSC VAC 5 $ 0 * & 8 @ 8 7 ! ALBUM SHUFFLE REC º .
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 29 Deutsch Español --------------------------------------------- 53 Nederlands Deutsch --------------------------------------------- 77 Italiano Nederlands -------------------------------------- 103 Svenska Italiano -------------------------------------------- 128 Dansk Svenska ------------------------------------------- 153 Suomi Dansk ------------
Contents English General Information Supplied accessories ............................................ Acknowledgement ............................................... Environmental information ................................ Safety information ................................................ Radio Reception 7 7 7 7 Tuning to radio stations .................................... 18 Storing preset radio stations .................... 18–19 Rear connections .............................................
This product complies with the radio interference requirements of the European Community. Supplied accessories – – – – – 2 speaker boxes remote control MW loop antenna FM wire antenna AC power cord Acknowledgement Energy Star As an ENERGY STARR Partner, Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency. Environmental information All unnecessary packaging has been omitted.
Preparations English MW loop antenna FM wire antenna FM AERIAL 75W speaker (right) AUX/ CDR IN R speaker (left) AM ANTENNA L + R – – L + AC MAINS SPEAKERS 6Ω AC power cord Rear connections The type plate is located at the rear of the system. For users in the U.K.: please follow the instructions on page 2. A Power Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. WARNING! – For optimal performance, use only the original power cable.
FM Antenna English Preparations Optional connection The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details. ● For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal. C Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-".
Controls (illustrations on page 3) English ÉÅ PLAY•PAUSE for CD/ MP3-CD .. to start or interrupt playback. for Tape ....................... to start playback. for Plug & Play ......... (on the system only) to initiate and start plug & play mode. Controls on the system and remote control 1 STANDBY ON – to switch the system on or to standby mode. 2 ECO POWER – í PREV / ë NEXT (- TITLE +) for MP3-CD ............ to select previous/next title. for CD ........................
@ DIM MODE – to select different brightness for the display screen : DIM 1, DIM 2, DIM 3 or DIM OFF. # # OPEN – to open the tape deck door. English Controls • Tape deck 1 ª Tape deck 2 º CLOCK•TIMER (CLK/ TIMER) – to view the clock. $ PROGRAM for CD/ MP3-CD .. to programme disc tracks. for Tuner ..................... to programme preset radio stations. for Clock .................... to select 12- or 24-hour clock mode. %n – to connect headphones.
Basic Functions English DISC DSC VAC ALBUM SHUFFLE REC . MAX SOUND VAC DBB INC SURR IMPORTANT! Before you operate the system, complete the preparation procedures. Plug and Play (for tuner installlation) Plug and Play allows you to store all available RDS stations and radio stations automatically. First time setup/power up 1 2 12 When you turn on the main supply, "AUTO INSTALL - PRESS PLAY" is displayed. PressÉÅ on the system to start installation. ➜ "PLUG AND PLAY" ....
To exit without storing the Plug and Play ● Press Çon the system. ➜ If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again. Notes: – When the power is turned on, the disc tray may open and close to initialise the system. – If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" will be displayed. – During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode.
Basic Functions English Volume control DSC (Digital Sound Control) Adjust VOLUME to increase (turn knob clockwise or press VOLUME +) or decrease (turn knob anti-clockwise or press VOLUME -) the sound level. The DSC feature enables you to enjoy special sound effects that have preset equaliser settings, providing the best music reproduction. 1 To listen through the headphones ● Connect the headphones plug to the n socket at the front of the system. ➜ The speakers will be muted.
English CD/MP3-CD Operations DISC DSC VAC ALBUM SHUFFLE REC MAX . SOUND VAC DBB INC SURR IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. – Do not load more than one disc into each tray. About MP3 disc Supported formats – ISO9660, Joliet, Multisession – Max. track number plus album is 255 – Max.
CD/MP3-CD Operations English 3 Press OPEN•CLOSE to close the disc tray. ➜ "READING" is displayed. The selected disc tray, total number of tracks and the playing time will appear on the display. ➜ A lighted button indicates that a disc is loaded on the disc tray. ➜ For MP3 disc, the name of the first album and title will be scrolled through the display once and followed by "AXX TXXX". Notes: – Load the discs with the label side facing up.
Different play modes: SHUFFLE and REPEAT 6 To end programming, press Ç once. ➜ PROG stays and the programme mode remains active. ➜ The total number of tracks programmed and the total playing time are displayed. ➜ For MP3 disc, total playing time will not be shown. 7 To start programme play, pressÉÅ. ➜ "PLAY PROGRAM" is displayed. You can select and change the various play modes before or during playback.
Radio Reception English DISC DSC VAC ALBUM SHUFFLE MAX REC . SOUND VAC DBB INC SURR Tuning to radio stations 1 2 3 4 Press TUNER to select TUNER mode. ➜ "TUNER" is displayed. A few seconds later, the current radio frequency will appear on the display. Press TUNER again to select the desired waveband : FM or MW. Press and hold à or á until the frequency indication starts to change, then release. ➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found.
Manual Preset Programming 1 2 Tune to your desired radio station (refer to “Tuning to radio stations”). Press PROGRAM. ➜ PROG starts flashing. ➜ The next available preset number is displayed for selection. To store the radio station to another preset number ● Press í or ë to select the desired preset number. 3 Press PROGRAM again to store the radio station. ➜ PROG disappears. ● Repeat steps 1–3 to store other radio stations. To exit manual preset mode ● Press Ç on the system.
Radio Reception English Setting the RDS clock Some RDS radio station may be transmitting a real clock time at an interval of every minute. It is possible to set the clock by using a time signal which is broadcast together with the RDS signal. 1 Press CLOCK•TIMER and RDS. ➜ If the RDS radio station does not transmit RDS time within 90 seconds, "NO RDS TIME" is displayed. Note: – Some RDS radio station may be transmitting a real time clock at a minute interval.
English Tape Operation/Recording DISC DSC VAC MAX SOUND ALBUM SHUFFLE VAC DBB INC SURR REC IMPORTANT! – Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism. – C-120 tape is extremely thin and is easily deformed or damaged. It is not recommended for use in this system. – Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer,TV or speaker).
Tape Operation/Recording English IMPORTANT! – Recording is permissible if copyright or other rights of third parties are not infringed upon. – Recording is possible only on tape deck 2. Rewinding / Fast forwarding 1 Stop playback, press à or á. ➜ The tape will stop automatically at the end of rewinding or fast forwarding. 2 Press Ç to stop rewinding or fast forwarding.
CD Synchronised start recording 1 ● Press í or ë to select the desired track, then press RECORD to start recording. ● You can programme the tracks in the order you want them to be recorded (refer to “CD Operation - Programming the disc tracks”). 2 Dubbing tapes 1 Press CD to select the disc. Press RECORD to start recording. ➜ The disc will start playback automatically. To stop recording ● Press Ç. ➜ Recording and disc playback will stop simultaneously.
Clock/Timer English DISC DSC VAC ALBUM SHUFFLE MAX REC . SOUND VAC DBB INC SURR IMPORTANT! – When in Eco Power standby mode, it is not possible to operate the clock or timer function. – Use CLOCK•TIMER (CLK•TIMER) to set the clock and timer. View clock The clock (if it is set) will be shown in standby mode. To view the clock in any source mode (CD or TUNER for example) ● Press CLOCK•TIMER. ➜ The clock is displayed for a few seconds. ➜ If the clock has not been set, "--:--" is displayed.
Timer setting The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The timer will always be switched on after it has been set. – The timer will not start if a recording is in progress. – The volume of the timer will increase gradually from the minimum level to the last tuned volume level.
Specifications English AMPLIFIER Output power ................................... 2 x 120 W MPO .................................................................... 2 x 60 W RMS(1) Signal-to-noise ratio .......................... ≥ 67 dBA (IEC) Frequency response .......................... 50 – 15000 Hz Input sensitivity AUX/CDR In .......................................... 500 mV / 1V Output Speakers .................................................................... ≥ 6 Ω Headphones ....................
Cleaning the Cabinet ● Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs ● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in circular motion. ● Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.
Radio reception is poor. ✔ If the signal is too weak, adjust the antenna or English connect an external antenna for better reception. ✔ Increase the distance between the Mini HiFi System and your TV or VCR. Recording or playback cannot be made. ✔ Clean deck parts, see “Maintenance”. ✔ Use only NORMAL (IEC I) tape. ✔ Apply a piece of adhesive tape over the missing tab space. The tape deck door cannot open. ✔ Remove and reconnect the AC power plug and switch on the system again.
