MML1801 FAMILY LCD 18” MONOCHROME MONITOR User’s Manual men u Copyright © 2002 FIMI S.r.l. Saronno - Italy All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner Printed in Italy (Rev. 1.
Copyright © This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format.
INTRODUCTION The FIMI Medical Grade MML1801 Medical is a monochrome active matrix, liquid crystal display exclusively designed for medical imaging applications. The monitor can be used for X-ray and PACS and other medical systems requiring a very high level of image quality for examination and control purpose and can accept an analogue signal input as well as a digital input. The product is engineered to meet all stringent medical safety requirements, including UL2601.1, CAN/CSA C22.2 No.601.1, EN-60601.
CONTENTS TECHNICAL INFORMATION.............................................5 DIMENSIONS..........................................................................6 INSTALLATION.....................................................................8 MOUNTING INSTRUCTION..............................................8 CONNECTING INSTRUCTION...........................................9 connecting AC power....................................................1 0 connecting analog video.................................
TECHNICAL INFORMATION Display Panel 18.1” (460mm) SXGA active matrix monochrome TFT/LCD Supported Grayscale 8-bit Dimensions Panel 410 x 362 x 105 mm. (width x height x depth.) Weight 7,7 Kg ( panel ), 3,7 Kg ( pedestal ) Active display area 359,0 x 287,2 mm ( width x height ) Response Time 40 mS ( 10% to 90% rising + 90% to 10% falling ) Viewing Angle ± 85° typ. horizontal or vertical ( contrast ratio ≥ 15 ) Contrast Ratio 550 : 1 typ.
21.3 22.2 17.6 1.5 82 48.7 MML1801 147.58 362 288.2 DIMENSIONS 410 360 197.78 306.
DIMENSIONS 205 117 100 117 71 181 100 29 181 205 7 MML1801
INSTALLATION Before unpacking the monitor , prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in an area that is relatively free of glare from sunlight or other sources of bright light. The monitor is cooled by two internal fans. For best performance, do not block the cooling vents. NOTE: before istalling this monitor, please refer to the user’s guides of your computer and video adapter to make sure if these equipments require any change of setting.
MOUNTING INSTRUCTION PEDESTAL STANDARD (OPTIONAL) I O fig. 9a The pedestal must be fixed at monitor with N° 6 screws M3x10 (included into the BOX) as shown in figure 9a. ARM VESA PLATE I O fig. 9b An arm with VESA (100x100) interface must be fixed at monitor with N° 4 screws M4x10 as shown in figure 9b.
CONNECTING INSTRUCTION CONNECTING AC POWER Plug the receptacle and of the cord set into the AC power adapter, then plug the power connector of the adapter into the power port on the monitor. This power port is located on the back of the monitor (see fig. 10a). MAINS SWITCH I O fig.10a The power cord set can be fixed to cabinet with proper cable clamp and screw (see fig. 10b) I O fig 10b Insert the plug end of the power cord into a grounded wall outlet.
CONNECTING ANALOG VIDEO (SXGA) With the power the computer and the monitor turned off, connect the supplied video cable from the monitor to the computer’s video port (see fig. 11a) I O G R B fig. 11a Make sure the video cable connector is securely connected to the video port on your computer. Turn the monitor on first, and then turn on the computer.
CONNECTING DIGITAL VIDEO (DVI) With the power the computer and the monitor turned off, connect the supplied video cable from the monitor to the computer’s video port (see fig. 12a) I O G R B fig. 12a CONNECTING TOUCHSCREEN (OPTIONAL) If your monitor has this optional feature, connect the monitor’s RJ11-4 serial port to the computer’s 9-pin RS-232 serial port using the proper cable (see fig. 12b) I O G R B fig.
INPUT INSTRUCTION fig.13a AC INLET MAINS SOCKET RS232 or TOUCHSCREEN DVI-INPUT VIDEO-INPUT XVGA INPUT OUTPUT COMPOSITE AC INLET (Meet IEC 320/CEE 22 STANDARD) 110/220Vdc RS232 / TOUCHSCREEN Connector (RJ11-4) Pin 1 : RS232 Rx Pin 2 : RS232 Tx Pin 3 : ENABLE (Only with touch screen) Pin 4 : GND Note: When the option touchscreen is used, the RS232 monitor control is not available. DVI INPUT Connector (Microcross™ DVI-D female connector) Pin 1 : D2_RX - (T.M.D.S.) Pin 2 : D2_RX + (T.M.D.S.
CONTROL PANEL DESCRIPTION On the front bottom side part of the unit the following controls are placed: - BRIGHTNESS ADJBRIGHTNESS ADJ+ MENU SELECT - / BRIGHTNESS Recall to 500 Cd/m² MENU SELECT + ENTER (Store/Source-Select) Light sensor LED GREEN= 500 cd/m² / Power-on RED < 500 cd/m² ORANGE= Stand-by menu fig.
(OSD) ON SCREEN DISPLAY MENU STRUCTURE MAIN MENU │ ├───── INFORMATION │ ├───── │ └───── │ ├───── IMAGE ADJUST │ ├───── │ ├───── │ ├───── │ │ │ │ │ │ │ ├───── │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ├───── │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └───── │ ├───── LANGUAGES │ ├───── │ ├───── │ ├───── │ ├───── │ └───── │ ├───── OSD SETTING │ ├──── │ │ │ │ │ │ │ ├───── │ │ │ │ │ ├───── │ ├───── │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └───── │ ├───── VIDEO SOURCE │ ├───── │
OSD KEY FUNCTIONS Function Key Description Enter N It activates the OSD MAIN MENU if this is not active, otherwise selects and executes a desired OSD Special Function. Adjust - Menu - When main menu or sub-menu is active, it allows to move or scroll to the previous (upper) item or decrement the magnitude of the parameter. Adjust + Menu + When main menu or sub-menu is active, it allows to move or scroll to the previous (down) item or increment the magnitude of the parameter.
6.2.0 Information 1) Press Enter button when the Information is highlighted on Main menu. The Information window appears. MML1821 Model Ver CO.62-DO.62 Firmware Release h00002 Operating Hours c1B Video timing number 3) To press Enter buttton to return to Main Menu. Information FIMI-Philips MML1801 Ver CO.62-DO.62 Exit h00002 c1B 6.3.0 Image Adjust 1) Press Enter button when the Image Adjust is highlighted on Main Menu. The Image Adjust window appears.
6.3.2 Vertical Position 1) Press Enter button when the Vertical Position is highlighted on Image Adjust. The Vertical Position bar appears. Image Adjust Horizontal Position Vertical position Scale / Center Image Enhancement Advanced Exit 2) Press Adjust + or Adjust - button to move the image to the up or down 3) When the position is adjusted, press the Enter button to return to Image Adjust window 4) To select Exit and press again Enter button to return to Main Menu or select Scale / Center 6.3.
6.3.5 ABC Selection 1) Press Enter button when the ABC Selection is highlighted on Image Enhancement The ABC Selection window appears. ABC Selection ABC Off ABC Reduced ABC Full 2) Press the Adjust + or Adjust - button until the desired item is highlighted.
Advanced Phase Adjust Clock Adjust Service Auto-Setup Options Auto-(Phase/Position) Auto-(Clock/Position) Auto-Level Restore Factory Presets Exit 2) Press the Menu + or Menu - button until the desired source is highlighted. 6.3.8 Phase Adjust 1) Press Enter button when the Phase Adjust is highlighted on Advanced. The Phase Adjust bar appears.
6.3.10 Service 1) Press Enter button when the Service is highlighted on Advanced. The Service window appears. 2) Press Menu + or Menu - button until the desired item is highlighted and press Enter 3) Press Adjust + or Adjust - button to adjust the quality image 4)When the item is adjusted, press the Enter button to return to Service window 5)Video Offset and Video Gain are items to use to calibrate the video signal BNC / DSUB / DSUB-SOG).
Auto-Setup On Modest Enabled Disabled Only Once Enabled Disabled Only Once Every time the video timing changes Never Only the first time that the video timing is recognized. 6.3.13 Auto-Clock Feature 1) Press Enter button when the Auto-Clock Feature is highlighted on Auto-Setup Options. The Auto-Clock Feature window appears.
6.3.17 Restore Factory Preset 1) Press Enter button when the Restore Factory Preset is highlighted on Advanced. To reload factory settings. 2) Select Exit and press Enter button to return to Image Adjust. 6.4.0 Languages 1) Press Enter button when the Languages is highlighted on Main Menu. The Languages window appears. The ON SCREEN DISPLAY shows the five languages available. The default is English, but you can select Français, Deustch, Español or Italiano.
6.5.2 OSD Horizontal Position 1) Press Enter button when the Horizontal Position is highlighted on OSD Position. The Horizontal Position bar appears. OSD Position Horizontal Position Vertical position Exit 2) Press Enter button and Adjust + or Adjust - button to move the OSD image to RIGHT or to the LEFT. 3) When the position is adjusted, press the Enter button to return to OSD Position window 4) Select Exit and press again Enter button to return to OSD Settings. 6.5.
6.5.5 OSD Transparency 1) Press Enter button when the OSD Transparency is highlighted on OSD Settings. The OSD Transparency bar appears. OSD Settings OSD Position OSD Size OSD Transparency OSD Timeout Exit 2) Press Enter button and Adjust + or Adjust - button to choose the degree of transparency of the OSD image 3) When the position is adjusted, press the Enter button to return to OSD Settings window 4) Select Exit and press again Enter button to return to OSD Main Menu. 6.5.
(*) Video Source If the Video Signal is not available a warning message will appear on the screen for about 5 sec. Check Input Signal (XXX) XXX= Current Video Source (BNC,DVI,DSUB,SOG) After about 5 sec. the monitor will go in Stand-By mode. The led colour will become orange. To change the Video Source when the Video Source is not available to follow the followings steps: - Wait the Warning Message. - Press contemporarily the brightness keys.
INTENTIONALLY LEFT BLANK
3119 206 1404.1 FIMI S.r.L R&D .
