HSB3280 Register your product and get support at Philips vous remercie de votre confiance. Gracias por escoger Philips Besoin d'une aide rapide? Necesita ayuda inmediata? Les Guide d'utilisation rapide et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips.
English Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.
PHILIPS LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. WHO IS COVERED: Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
1 Important Important safety instructions Important Safety Instructions Notice Recycling 2 Your Soundbar System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started 6 6 6 7 8 9 9 9 10 11 13 13 13 14 Attach speakers to the main unit Attach the stand Connect AV devices Option 1: Connect this soundbar to devices through the TV 14 Option 2: Connect devices through this soundbar to the TV (basic) 15 Option 3: Connect devices through this soundbar to the TV (ad
1 Important Important safety instructions Important Safety Instructions a Read these instructions. k Only use attachments/accessories specified by the manufacturer. l Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water.
Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
• • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. For Canada: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
English 2 Your Soundbar System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome. Introduction Your soundbar provides superb sound performance when you watch TV, DVDs, listen to music, or play games. You can control all connected audio/video devices easily with the programmable smart remote control. The wireless subwoofer makes setup simple, too - there are no messy cables to connect.
Overview of the main unit a k l b cd e mn a SOUND SETTINGS (GAMES, MOVIE, MUSIC) • Select a sound effect. b IR sensor c AV FRONT (VIDEO L-AUDIO-R) • AV input sockets on the front panel. d Flip cover e Display panel • Show current status. f • 10 EN Socket for a USB mass storage device. f o g h p i j q g POWER • Turn on the soundbar, switch to standby mode, or switch to Eco Power Standby. h PRESET/ • Select a preset FM radio station. • Select an album/folder in a connected USB device.
l DC IN • Connect the AC adaptor. Overview of the remote control English k PRESS • Detach speakers from the main unit. m AUDIO IN - COAXIAL • Coaxial audio output socket. n VIDEO OUT • Socket for composite video output. o AV2 IN (VIDEO L - AUDIO - R) • AV input sockets. p AV1 IN (VIDEO L - AUDIO - R) • AV input sockets. q FM ANTENNA Connect the FM antenna.
a • Turn on the soundbar, switch to standby mode, or switch to Eco Power Standby. b SET TIME/PROG • Set the clock. • Program tracks in a USB device. • Program radio stations. c SETUP • Rename AV resource. d REPEAT • Select a repeat play mode for the connected USB device. e SHUF • Play tracks in the USB device randomly. f GAME SOUND • Select a game sound setting. g MOVIE SOUND • Select a movie sound setting. h VOL +/• Adjust volume. • Adjust time. i LEARN • Program remote control.
English 3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your soundbar. The model number and serial number are on the bottom of your soundbar. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Attach speakers to the main unit 1 2 Place the main unit on a soft and flat surface.
Tip • You can also mount the soundbar on a wall (see ‘Appendix’ on page 29). Connect AV devices Note AUDIO OUT (DIGITAL) • There are various ways to connect the soundbar to • • • • other AV devices. You only need to select the best option that fits your existing AV device setup. For AV connection to the soundbar, there are multiple sets of AV sockets available on the main unit. You can choose either set for an AV connection.
If the TV does not have an available audio output socket, follow these instructions. 1 B Set top box Connect the AV output sockets the set top box to the AV1 IN (VIDEO L - AUDIO - R) sockets. Connect the video input socket on the TV to the VIDEO OUT socket. L VIDEO IN 2 AUDIO OUT AUDIO R VIDEO TV Connect the AV devices directly to the soundbar: A Game console: Connect the AV output sockets on the game console to the AV FRONT (VIDEO L-AUDIO-R) sockets.
Option 3: Connect devices through this soundbar to the TV (advanced) If you want to connect all the devices for use to this soundbar and the TV has an available digital output socket, follow these instructions. 1 Connect the AV devices directly to the soundbar: A DVD player: Connect the AV output sockets on the DVD player to the AV FRONT (VIDEO L-AUDIO-R) sockets.
English Connect FM antenna VIDEO IN TV Tip • For optimal reception, fully extend and adjust the 3 Connect the digital output socket on the TV to the AUDIO IN - COAXIAL socket with the supplied orange coaxial cable. position of the antenna. • For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA socket. • The soundbar does not support AM radio reception. 1 Connect the supplied FM antenna to the FM ANTENNA socket.
Install remote control batteries Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. For first-time use: 1 3 Connect the other end to the wall outlet. Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 2 3 Open the battery compartment.
Press SET TIME/PROG to confirm the clock setting. Set up wireless connection manually 1 Turn on In standby mode, press and hold SOURCE on the main unit for 3 seconds. » The blue and green indicators on the subwoofer flash alternately. » [PAIRING] (pairing) flashes. 1 Press . » The soundbar switches to the last selected source. 2 Wait for automatic setup of wireless connection between the main unit and subwoofer. » [PAIRING] (pairing) flashes.
6 4 Play Play an AV source through this soundbar Note • Ensure that you have made the necessary AV connections (see ‘Connect AV devices’ on page 14). 1 Press AV 1, AV 2, AV FRONT or COAX to select an AV source. Play from USB Note • Ensure that the USB device contains playable music (see ‘USB playability information’ on page 27). 1 2 Flip open the cover on the front panel. Insert the USB plug of a USB device into the socket. 3 Press USB to select the USB source.
Random play English 5 Control USB play 1 Press SHUF. » All tracks are played randomly. 2 To return to normal play, press SHUF again. Skip to a track 1 2 Tip Press PRESET/ALB/ (folder). Press / to select an album the same time. to select a track (file). Pause/resume play 1 During play, press OK / resume play. Program tracks to pause/ Search within a track 1 2 • The repeat and shuffle functions cannot be activated at During play, press and hold / . Release to resume normal play.
6 Adjust volume level and sound effect Select a movie sound effect 1 Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Adjust subwoofer volume 1 During play, press MOVIE SOUND repeatedly to select: • [DRAMA] (drama) • [SCIENCE FICTION] (science fiction) • [ACTION] (action) • [CONCERT] (concert) • [NORMAL] (normal) Select a music mode (for USB only) 1 In AV1, AV2, AV FRONT or COAXIAL mode, press MUSIC MODE/SUBW VOL to adjust the subwoofer volume.
Program radio stations manually English 7 Tune to FM radio stations Note 1 Ensure that you have connected and fully extended the supplied FM antenna. 2 3 4 Press TUNER. 5 Press and hold / . When [SEARCH] (search) is displayed, release the button. » The FM tuner tunes to a station with strong reception automatically. stations. 1 2 Tune to a radio station. 3 Press PRESET/ALB/ to allocate a number from 1 to 20 to this radio station, then press SET TIME/PROG to confirm.
» If the code is stored successfully, the indicator flashes green for 2 seconds, then turns blue again. 8 Use more of your soundbar 5 Repeat steps 3 and 4 to program more buttons on the smart remote control (A). Program remote control 6 Press LEARN to exit the learning mode. You can store a total of 12 most frequently used functions of other AV devices in the smart remote control. This feature allows you to use only one remote control to operate all of your AV devices.
This feature only applies to AV devices or TV with audio connection to the soundbar. The soundbar can detect the state of AV devices that are connected through the audio connectors. When automatic on/standby is enabled: • If an AV device turns on, the soundbar turns on automatically. To enable When the soundbar is turned on, press and hold SOURCE on the front panel for more than 2 seconds.
9 Product information L/R speakers Speaker Impedance Speaker Driver Sensitivity 3ohm (woofer) + 3ohm( tweeter) 1.5” woofer+1.5” tweeter >82dB/m/W Note • Product information is subject to change without prior notice. Subwoofer Speaker Impedance Speaker Driver Sensitivity 3ohm*subwoofer 6.
USB playability information • • • • • • • • • • • • English Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.
10 Troubleshooting Caution • Never remove the casing of this soundbar. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this soundbar, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. Philips.com/support). When you contact Philips, ensure that your soundbar is nearby and the model number and serial number are available (see ‘Get started’ on page 13).
Mount the main unit and speakers English 11 Appendix Caution Mount to a wall • To find a suitable mounting location, make the necessary physical and wireless connections. • Mount the main unit and speakers to a solid concrete wall or plaster board wall only! Caution • Risk of product damage! Always consult professional • personnel to safely mount the product to a wall. Risk of injury! Ensure that no supply ducts such as gas, water or electricity are harmed when you drill the holes.
3 Secure 2 supplied screws in the holes, but leave 5mm between the screw head and the wall. 4 Secure the wall mount bracket onto the main unit with 2 supplied screws. 5 Hook the main unit and speakers in place.
© 2008 Koninklijke Philips Consumer Lifestyle N.V. All rights reserved.
