Getting started guide

25
After you have completed the initial setup procedure with the Media Center setup wizard, changing of settings is
always possible. Steps you have skipped during initial setup can also be completed.
Changing settings
1 Press the key (8) on the remote control.
> The Media Center Start menu appears.
2 Select Settings.
3 Press the OK key (19).
You have access to Settings-submenus for:
- General Media Center settings
- TV
- Pictures
- Music
- DVD
- Messenger and Caller ID
- Radio
- Help
Changing screen resolution
An important example of changing your Media Center’s settings is the change in screen resolution.
1 Press the key (8) on the remote control.
2 Select Settings and press the OK key (19).
3 Select Media Center Setup in the Settings
(General) window and press the OK key (19).
4 Select Configure Your TV or Monitor in the Media
Center Setup settings window and the OK key (19).
5 Follow the on-screen instructions and select Display
type and Connection type.
Note: If you are using the SCART output (21) of the Media
Center, select Component (YpbPr).
6 Select Adjust Display Controls in the Adjust Your
Display Settings window and the OK key (19).
7 Select Next and press the OK key (19) to display the
list of controls in the Display Calibration window.
8 Select Aspect Ratio (Shape) and press the OK key
(19).
9 Select Change Screen Resolution, press the OK key
(19) and select Ye s in the inset window.
10 Use your keyboard and mouse to set the new resoluti-
on in the Windows XP Display Properties window that
appears.
11 When finished click the maximize key in the upper right
corner of the Media Center window to return to the
fullscreen display of the Media Center window.
QIG_MCP9350i_Eng_UK.qxd 01-11-2005 09:21 Pagina 25