Register your product and get support at www.philips.
1 Important Safety Notice 2 Your Micro Hi-Fi System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Connect FM antenna Connect MW antenna Connect speakers Connect power Prepare the remote control Auto install radio stations Set clock Turn on 4 Play Play disc Play USB Play tape 5 Disc/USB play options Repeat and random play Program tracks Display play information 6 Listen to radio Tune to a radio station Program radio stations automatically Program r
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, RU RWKHU DSSDUDWXV LQFOXGLQJ DPSOLÀHUV that produce heat.
This product complies with the radio interference requirements of the European Community. This product complies with the requirements of the following directives and guidelines: 2004/108/EC + 2006/95/EC $Q\ FKDQJHV RU PRGLÀFDWLRQV PDGH WR WKLV device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
2 Your Micro HiFi System Congratulations on your purchase, and ZHOFRPH WR 3KLOLSV 7R IXOO\ EHQHÀW IURP WKH support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from discs, tapes, USB devices, external devices, or radio stations. When you play a tape, you can freely change a tape side without a need to manually re-load the tape.
English Overview of the main unit a STANDBY-ON/ECO POWER Turn on the unit, or switch to standby mode, or switch to Eco Power Standby. b Disc compartment door c iR Remote sensor. d Display panel Show current status.
e Jack for a USB mass storage device. f PLAY/PAUSE Start or pause disc/USB play. Start tape play. Overview of the remote control g PRESET / Skip to the previous/next track. Select a preset radio station. Change a tape side. h ALBUM/TUNING / Skip to the previous/next album. Search within a track/ disc/USB/tape. Tune to a radio station. i STOP/DEMO Stop disc/USB/tape play Erase a disc/USB program. Turn on or off the unit’s features display.
g USB REC Record from a disc to a USB device. h TAPE REC Record from a disc/USB/radio/AUX to a tape. i DIM Select different levels of display brightness. j INC.SURR Turn on or off incredible surround. k BASS +/ Increase/decrease a bass level. l USB Select the USB source. m MUTE Mute volume. n TREBLE +/ Increase/decrease a treble level. o TIMER ON/OFF Turn on or off alarm timer. p SLEEP/TIMER Set the sleep timer. Set the alarm timer.
Connect MW antenna 1 Assemble the MW loop antenna. 2 2 Insert the stripped part of the wire completely. Insert the right speaker wires to “ R”, left speaker wires to “L”. Insert the red wires “+”, black wires to “-”. 3 3XOO WKH VRFNHW ÁDS WR FORVH WKH VRFNHW Connect the MW loop antenna to the MW jack on the back of the main unit. a b c Connect power Connect speakers Caution For optimal sound, use the supplied speakers only.
Caution Risk of explosion! Keep batteries away from heat, VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH To replace the remote control battery: 1 2 Open the battery compartment. 3 Close the battery compartment. Insert 2 AA batteries with correct polarity (+/-) as indicated. 3 Set clock 1 In the standby mode, press DISPLAY/ CLOCK to activate the clock setting mode. 2 Press PROGRAM repeatedly to select 12 hour or 24 hour format. 3 4 5 6 Press VOL +/- to set the hour.
To select an album, press ALBUM / . To search within a track, press and hold ALBUM / then release to resume normal play. 3 Load the tape with the open side downward and the full spool to the left. 4 Press to start play. To fast rewind or wind the tape, press ALBUM / . To stop fast rewinding or winding, press . To stop play, press . To change the tape side during play, press / . To change a play mode, press TAPE A/B repeatedly to select: » : play one side.
2 >6+8))/ 5(3 $//@ VKXIÁH UHSHDW all) is displayed: all tracks are played continuously in a random play. To return to normal play, press REPEAT and SHUFFLE. Program tracks To tune to a weak station, press ALBUM / repeatedly until you ÀQG RSWLPDO UHFHSWLRQ English Program radio stations automatically You can program a maximum of 40 tracks. You can program a maximum of 40 (FM + MW) preset radio stations. 1 At CD/USB mode, in the stop position, press PROGRAM to activate the program mode.
FM stations with RDS Incredible surround Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations. If you listen to a FM station with RDS signal, “RDS” is displayed. You can enhance audio with a virtual surround sound effect. Display RDS information 1 For a FM station with RDS, press RDS/ NEWS repeatedly to display various broadcast information. Listen to RDS news 1 Make sure that RDS stations are stored on the unit.
If the USB device does not have enough memory to store the CD track, a message about a full memory is displayed. 9 Record to tape Note 1 2 3 Ensure that you have set the clock correctly. 4 Press CD, or TUNER or USB or TAPE to select a source. 5 6 7 8 Press VOL +/- to set the hour. To record, use only “Normal” (IEC type I) tapes on which the write-protect notches (tabs) are not broken. 1 Press OPEN/CLOSE on the front panel to open the tape compartment. 2 3 Load a tape.
Listen to an external device You can listen to an external audio device through this unit. 1 2 3 Press AUX to select the AUX source. Connect the audio cables (white/red jacks, not supplied) to: the AUX IN jacks on the back of the unit. the AUDIO OUT jacks on an external device. Start to play the device (refer to the device’s user manual).
Speaker Impedance Woofer Tweeter Dimensions (W x H x D) Weight 4ohm 1 x 5.25” Ribbon tweeter 175 x 252 x 196mm 2.97kg each General information AC power Operation power consumption Standby power consumption Eco power standby consumption USB direct Dimensions Main Unit (W x H x D) Weight (without speakers) 220 - 240V, 50Hz 55W <15W <1W Unsupported formats: Empty albums: an empty album is an album that does not contain MP3/WMA ÀOHV DQG LV QRW EH VKRZQ LQ WKH GLVSOD\ 8QVXSSRUWHG ÀOH IRUPDWV DUH VNLS
Clean the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. 12 Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. MCM761_12_UM_V2.
