MCM398D Quick Start Guide What’s in the Box? You should find these items upon opening the box. Pull out the plastic protective sheet before use. 1 Dock & 8 Dock Adapters for iPod FM antenna Remote Control 2 User Man ual 1 Quick Sta rt Guide Quick Start Guide MCM398D QUGG_Eng User manual 1 2007.4.
1 Connect the speaker cables. 2 Connect the FM antenna. 3 Connect the AC power cord of the system. Tip See the User Manual for how to connect other equipment to this system. FM wire antenna 2 DOCK IN 1 Speaker (right) Speaker (left) AC power cord 3 MCM398D QUGG_Eng 2 2007.4.
Setting the clock IMPORTANT! – To set clock in the Eco Power mode, press and hold ECO POWER/ STANDBY-ON 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 2 In standby mode, press and hold CLOCK/RDS on the remote control. ➜ SET CLOCK is displayed briefly. Then, the clock digits for the hours flash. Press 9 on the remote control to select clock mode. ➜ "12 TO 24 HOUR" or "24 TO 12 HOUR" scrolls once.
C Enjoy Playing a USB mass storage device With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to work with this Hi-Fi system). 1 Insert the USB device’s USB plug into the socket on the set. 2 Press SOURCE once or more (or USB/AUX on the remote control) to select USB. 3 Play the USB’s audio files as you do with the albums/tracks on a CD.
C Enjoy Playing iPod using the dock 1 Select the correct dock adaptor supplied, then snap the adaptor into the dock connector (iPod) to provide a snug fit for the player. ● The indication on the adaptor’s back fits specific iPod player. 2 Correctly place your player in the dock connector. 3 Connect the cables of the dock to DOCK IN jacks on the main set correspondingly. 4 Press SOURCE on the set repeatedly (or iPod on the remote control) to select iPod source.
