Quick start guide

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

User Manual

FM antenna MW antenna Remote Control

Quick Start Guide

User manual

MCM394

Pull out the plastic

protective sheet

before use.

MCM394 QUG_Eng 2007.12.20, 2:20 PM1

PAGE 1
MCM394 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Pull out the plastic protective sheet before use. FM antenna MW antenna Remote Control 2 User Man ual 1 Quick Sta rt Guide Quick Start Guide MCM394 QUG_Eng User manual 1 2007.12.
PAGE 2
1 Connect the speaker cables. 2 Connect the MW and FM antennas. Tip See the User Manual for how to connect other equipment to this system. MW loop antenna FM wire antenna 2 1 Speaker (right) Speaker (left) AC power cord MCM394 QUG_Eng 2 2007.12.
PAGE 3
Setting the clock IMPORTANT! – To set clock in the Eco Power mode, press and hold ECO POWER/ STANDBY-ON 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press and hold CLOCK on the remote control. ➜ SET CLOCK is displayed briefly. Then, the clock digits for the hours flash. 2 Press 9 on the remote control to select clock mode. ➜ "12 TO 24 HOUR" or "24 TO 12 HOUR" scrolls once.
PAGE 4
C Enjoy Playing a USB mass storage device With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to work with this Hi-Fi system). 1 Insert the USB device’s USB plug into the socket on the set. 2 Press SOURCE once or more (or USB on the remote control) to select USB. 3 Play the USB’s audio files as you do with the albums/tracks on a CD.